waterproof rtv silicone rubber silica in-green for substrate

Enterprise Strength

Based on customer demand, SANDAO New Material provides quality services for customers and chases for long-term and friendly cooperation with them.

Application Scope

The ms adhesive of SANDAO New Material is applicable to the following areas.Guided by the actual needs of customers, SANDAO New Material provides comprehensive, perfect and quality solutions based on the benefit of customers.

Company Advantages
1. SANDAO rtv silicone is an innovative design product developed by the concerted effort of a strong R&D team and professional design team. It is in response to the requirements of home and abroad customers.
2. The product is able to last for a long time. No matter what happens to it, wet it with water or pour on chemicals, it stays actually the same.
3. It has gained abundant good reviews from its users.

our product

waterproof rtv silicone rubber silica in-green for substrate-1

RTV Silicone adhesive SD903-1

RTV Silicone adhesive SD903-1 is a high temperature resistant silicone adhesive. It’s red viscous liquid with excellent insulation, good adhesion, moisture resistance, shock resistance, corona resistance and leakage resistance. The silicone adhesive has good adhesion to metals and most plastics, and has excellent resistance to cold and heat exchange after curing.

Application

The organic RTV silicone adhesive is used for coating protection, bonding positioning and reinforcement of electronic components on electronic circuit board, and moisture-proof sealing. Waterproof sealing of all kinds of instruments and shallow potting of miniature electronic components and modules.

waterproof rtv silicone rubber silica in-green for substrate-2

Electronic component bonding

waterproof rtv silicone rubber silica in-green for substrate-3

Electronic instrument housing bonding

waterproof rtv silicone rubber silica in-green for substrate-4

Glass bonding

waterproof rtv silicone rubber silica in-green for substrate-5

Shallow potting of the module

waterproof rtv silicone rubber silica in-green for substrate-6

Semiconductor material bonding

waterproof rtv silicone rubber silica in-green for substrate-7

Ceramic bonding

product Performance

Type	SD903-1	SD903
Color	Red paste	Red semi-fluid
Density(g/cm3)	1.3～1.5	1.2～1.3
Tack-free time（25℃,min）	≤30	≤30
Tensile strength（MPa）	≥2.0	≥2.0
Elongation（%）	250～350	250～350
Shear strength（MPa）	≥1.5	≥1.5
Hardness(shore A)	40～50	35～45
Temperature range（℃）	-60～315	-60～260
Dielectric constant（@60Hz）	2.8	2.8
Dielectric strength（kV/mm）	≥20	≥20
Volume Resistance（Ω.cm）	1.0×10¹⁵	1.0×10¹⁵

Product details

waterproof rtv silicone rubber silica in-green for substrate-8

Organic silicone adhesive

SD903-1 is a high temperature resistant silicone adhesive that is placed in the air to allow it to cure naturally.

waterproof rtv silicone rubber silica in-green for substrate-9

Eco-environmental protection

Neutral Non-corrosive, Non odor, Non pollution, excellent insulation, good adhesion

waterproof rtv silicone rubber silica in-green for substrate-10

Red paste

Excellent resistance to cold and heat alternation after curing, moistureproof, anti-shock, corona-resistance, and leakage resistance.

waterproof rtv silicone rubber silica in-green for substrate-11

Hard plastic tube seal

Packing specification: 310ml /Cartidge.

Use instructions

1. Cleaning the surface of the adhered or coated object to remove rust, dust and oil.
2. Unscrew the rubber cap and squeeze the glue onto the cleaned surface to make it evenly distributed.
3. The coated parts are placed in the air and allowed to stand at room temperature for 24 hours.

Packaging and preservation

Notes:
1.Keep thermal adhesive out of reach of children.
2.Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.

Company Features
1. Huizhou SANDAO New Material Co., Ltd has absorbed a lot of experience in manufacturing rtv silicone over such years. We can be counted as a strong competitor in the market now.
2. Huizhou SANDAO New Material Co., Ltd has a very refined apparatus.
3. To provide more and better high quality rtv silicone rubber , SANDAO aim to create a trustworthy and responsible enterprise. Check it! what is rtv silicone is the core concept of Huizhou SANDAO New Material Co., Ltd's pursuit. Check it! Upholding the working spirit of rtv silicone , SANDAO provides the most convenient One-component RTV silicone rubber TDS. Check it!

c******o

rtv silicone rubber is useful to optimize rtv silicone and enhance the usable life of it.

e******s

Our rtv silicone are as superb quality as well as the leading brand products.

q******a

The body frame lightweight design of what is rtv silicone have the extremely vital significance.

r******m

Compared with normal material, the remarkable advantages of material for One-component RTV silicone rubber TDS prove that One-component RTV silicone rubber TDS is the best.

n******o

rtv silicone outshine other similar products due to its One-component RTV silicone rubber TDS design.

l******r

The product has the required durability. It features a protective surface to prevent humidity, insects or stains to enter into the inner structure.

Product Message

*Name

Phone

*E-mail

*Content