SANDAO  >  AI - Page Sitemap  >  useful Two-component addition-type potting adhesive TDS adhesive factory for glass parts
useful Two-component addition-type potting adhesive TDS adhesive factory for glass parts

Useful Two-component addition-type potting adhesive TDS adhesive factory for glass parts

Model number
SD9501
MOQ
1pcs
Color
Transparent/White/black liquid
Package
20kg/ set
Main characteristic
Ratio is 1:1, good elasticity after curing, waterproof and insulation
Main application
electrical and electronic components, LED junction box, wind power motor, PCB substrate etc.
Lead time
within a week after payment
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Information of useful Two-component addition-type potting adhesive TDS adhesive factory for glass parts
Product Details
SANDAO New Material pursues perfection in every detail of silicone adhesive, so as to show quality excellence. silicone adhesive is a truly cost-effective product. It is processed in strict accordance with relevant industry standards and is up to the national quality control standards. The quality is guaranteed and the price is really favorable.
Company Advantages
1. The raw material of Two-component addition-type potting adhesive TDS is ge rtv silicone and has the advantages of ge rtv silicone.
2. This product has a good performance in thermal insulation. It is not prone to expand when used in a high-temperature condition.
3. Huizhou SANDAO New Material Co., Ltd has an advantage comparing with other Two-component addition-type potting adhesive TDS companies in terms of finance, quality and fame.
4. As per outer packing for Two-component addition-type potting adhesive TDS, Huizhou SANDAO New Material Co., Ltd promises to put into high cost to keep it solid enough.

our product

bg


useful Two-component addition-type potting adhesive TDS adhesive factory for glass parts-1
Sandao organic silicon electronic potting sealant SD9501
Sandao organic silicon electronic potting sealant SD9501 is synthesis organo silicon electronic pouring sealant with high elasticity and high transparent for electronic component, packing divided to A and B two component, mixes the A and B two components and fully agitates before filling and sealing; The mixture has good fluidity, good elasticity after curing, excellent resistance to high and low temperature, excellent electrical performance, ozone resistance and atmospheric aging resistance, which is used for long-term outdoor use. The products are in full compliance with the requirements of the EU RoHS Directive.

Feature

  • ◪   Resistance to high and low temperature  -60~260℃

  • ◪   Sandao organic silicon electronic pouring sealant with the advantages of automatic leveling, automatic remove air bubbles, high viscosity, high temperature resistance, moisture proof and waterproof insulation, easy rework, it can used as adhesive, sealing, waterproof, moisture-proof, mildew proof, dustproof, filling seal, shock absorption, aging resistance and so on.

Application

bg


This potting sealant is fit for electrical and electronic components which required for waterproof and insulation, used for adhesive and sealing LED junction box, wind power motor, PCB substrate, etc., as well as various AC/DC power supply modules, control modules, automotive HID stabilizers, lights and various power control modules,etc.

useful Two-component addition-type potting adhesive TDS adhesive factory for glass parts-2

DC power module bonding

useful Two-component addition-type potting adhesive TDS adhesive factory for glass parts-3

LED junction box bonding

useful Two-component addition-type potting adhesive TDS adhesive factory for glass parts-4

Wind energy motor bonding


useful Two-component addition-type potting adhesive TDS adhesive factory for glass parts-5

Power module

useful Two-component addition-type potting adhesive TDS adhesive factory for glass parts-6

PCB board bonding

useful Two-component addition-type potting adhesive TDS adhesive factory for glass parts-7

Lamp part Bonding



product Performance

bg


No.ItemStandardStandardStandard
1Before curingPart Aappearancetransparentblackwhite
2viscosity(m Pa·S)800~1000800~1000800~1000
3density(g/cm3)0.95~1.00.95~1.00.95~1.0
4Part Bappearancetransparenttransparenttransparent
5viscosity (m Pa·S)50-15050-15050-150
6density (g/cm3)1.0-1.31.0-1.31.0-1.3
7viscosity after mix(m Pa·S)1000~13001000~13001000~1300
8mix ratio100:10100:10100:10
9Operable time(min)<30<30<30
1060℃ heating curing time(min)303030
11Room temperature curing time(hr)242424
12After curinghardness(shore A,24hr)30~5030~5030~50
13tensile strength(MPa)≥0.8≥0.8≥0.8
14volume resistivity(Ω·cm)≥1.0×1015≥1.0×1015≥1.0×1015
15dielectric strength(kv/mm)≥ 20≥ 20≥ 20
16bake(80℃  144h)Not yellow --

Kind remind: The above properties were measured at 25 ℃ and 55% RH for 7 days. The parameters provided in this data may vary depending on the environmental, temperature and humidity conditions;

Product details

bg
useful Two-component addition-type potting adhesive TDS adhesive factory for glass parts-8
Silicone electronic potting
SD9501 integrated silicone electronic potting Compound, high elasticity, high transparent Electronic components potting glue.
useful Two-component addition-type potting adhesive TDS adhesive factory for glass parts-9
White/black viscous liquid
Good fluidity, good elasticity, excellent resistance to high and low temperature, excellent electrical performance.
useful Two-component addition-type potting adhesive TDS adhesive factory for glass parts-10
Green environmental protection
Non-toxic and non-corrosive,The products fully comply with the requirements of EU RoHS standard
useful Two-component addition-type potting adhesive TDS adhesive factory for glass parts-11
Iron bottle packaging
packing specification: 20kg/set ,component A/10kg .component B/10kg.

Use instructions

bg


  Caution
  • 1.   Mix the two components according to the weight ratio of A:B=1:1 and stir well, then remove air bubbles (vacuum or static) and then fill it up.  Note: must stir evenly, otherwise affect the properties of solidified compounds; should be used within the applicable period of the sealant.

  • 2.   About mixing; After mixing component A and component B, manual or mechanical mixing can be adopted. When mixing, high temperature should be avoided because of high speed and long time agitation, so as to avoid shortening operation time and speeding up solidification, in case operate time is not enough. The surface of the product must be cleaned before it is sealed.

  • 3.   The work site and working environment must maintain the air circulation, in case the concentration is too high after the chemical liquid volatilize in the air, causes the staff to be sick (respiratory tract and skin irritation etc.).

  • 4.   The surface in contact with the compound must be cleaned. It is forbidden to mix the compound with organic compounds containing nitrogen, phosphorus, sulfur and heavy metal ions containing Sn,Ph,Hg, Bi, As , in case affect the curing of the compound.

Packaging and preservation

bg


20kg/ set (component A 10kg and B 10kg), transported as non-dangerous goods, stored in a cool (room temperature) dry place, guarantee period is 6 months.


Company Features
1. Huizhou SANDAO New Material Co., Ltd has a leading position within areas of Two-component addition-type potting adhesive TDS design and production.
2. We have excellent manufacturing and innovation capabilities guaranteed by international advanced Two-component addition-type potting adhesive TDSequipment.
3. Huizhou SANDAO New Material Co., Ltd spares no effort to improve the standard of Two-component addition-type potting adhesive TDS with quality support. Inquiry! SANDAO dreams can lead the ge rtv silicone industry development. Inquiry! SANDAO expects to genuinely assist every client by enhancing quality and support. Inquiry! Our goal is to make every customer enjoy the service at SANDAO New Material. Inquiry!
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...