Two-component addition-type potting adhesive TDS | Two-component addition-type potting adhesive TDS

Product Information
Customer Reviews

Company Advantages
1. Strictly selected raw materials: SANDAO ge rtv silicone is made from top grade raw materials which are all well-selected and then are quickly put into precision production. Its quality directly benefits the service life of the products that use it
2. Two-component addition-type potting adhesive TDS is highly competitive in the overseas market and enjoys high popularity and reputation. In some cases, it can achieve flame retardant, weathering, and thermal conductivity properties
3. Catering to strict standards, Two-component addition-type potting adhesive TDS is reinforced to guarantee the safety during the usage. It has good adhesion to a variety of materials

our product

Sandao Two-component flame-retardant heat-conductive potting adhesiveSD6105

Sandao Two-component flame-retardant heat-conductive potting adhesiveSD6105 is suitable for long-term protection of sensitive circuits or electronic components, with stable dielectric insulation, the elastomer formed after curing is in a large range of temperature and humidity; Eliminating stresses from shocks and vibrations. It can maintain the original physical and electrical properties under various working conditions. This item has good chemical stability, easy to clean and remove after filling. in order to repair the electronic components. Excellent temperature resistance, can be used at-50 ℃ for a long period of time, fully in accordance with the European Union ROHS, can pass through the UL94-V0 fire-proof class.

Application

SD6105 is used for sealing and potting of LED Street Light driving Power supply, LED spot light Power supply Module, Electroplating Power supply, Power Rectifier, Transformer, Generator PCB, oven and other High heating and fire prevention products, as well as large Power Electronic components, Coating protection of electronic modules and circuit boards which with high requirements for heat resistance and heat dissipation.

Generator circuit board

LED spotlight power module

Sealed potting

Plating power supply

LED street light drive power supply

Transformer

product Performance

Item			6105	6105	6105
Before curing	Part A	appearance	black	white	gray
		viscosity（cps)	3500～5500	3500～5500	3500～5500
		relative density（g/cm³）	1.10～1.15	1.10～1.15	1.10～1.15
	Part B	appearance	White liquid	White liquid	White liquid
		viscosity（cps)	3500～5500	3500～5500	3500～5500
		relative density（g/cm³）	1.10～1.15	1.10～1.15	1.10～1.15
A：B（ratio）			1:1	1:1	1:1
Curing type			bi-component additive type	bi-component additive type	bi-component additive type
Viscosity after mix（cps)			3500～5500	3000～5500	3000～5500
Operate time（min)			55～80	55～80	55～80
Curing time（min 25℃)			480	480	480
Curing time（min 80℃)			20	20	20
After curing	hardness（ShoreA,24hr)		40～55	40～55	40～55
	tensile strength (Mpa)		＜1.50	＜1.50	＜1.50
	shear strength (Mpa)		2.00	2.00	2.00
	Linear Shrinkage（%)		0.3	0.3	0.3
	temperature range（℃）		-60～260	-60～260	-60～260
	volume resistivity（Ω·m³)		1.0×10¹⁶	1.0×10¹⁶	1.0×10¹⁶
	dielectric strength (KV/·㎜)		≥27	≥27	≥27
	dielectric constant（1.2MHz)		3.2	3.2	3.2
	Leakage resistance index（V)		600	600	600
	thermal conductivity [W/(m·K)]		0.80	0.80	0.80
	inflaming retarding property		UL94-V0	UL94-V0	UL94-V0

Mark: The above properties were measured at room temperature.

Product details

Thermally conductive flame retardant potting sealant

SD6105 is a two component 1:1 cross-linking by reaction, gray, solidified into a high performance elastomer.

Gray solid

It has stable dielectric insulation properties, temperature resistance, good chemical stability, and easy to clean and remove after potting.

Eco-environmental protection

Non-corrosion, non-pollution and EU RoHS standard with flame resistance UL94-V0

Plastic barrel seal

packaging, protective glue, 10kg /set (component A/ 5kg .component B/5kg), shelf life of 12 months.

Use instructions

Caution

1. Weighting: Accurate weighing the part A and part B. (stir A and stir B separately before weighting, Evenly redistribute slightly subsided fillers into glue.)
2. Mix glue: B component is added to A component and mixed evenly;
3. Remove air bubbles: The evenly mixed rubber material is placed in the vacuum cabinet to remove foaming;
4. Pouring: After air bubbles removed, pouring the glue into the parts and components for potting; (the surface of the parts and the mixing container before pouring should be clean and dry, do not contact with the compounds such as N、P、S、Sn、Pb、Hg、As, so as not to affect the solidification.
5. Curing: solidification of a potting part at room temperature or heated.

Packaging and preservation

10kg/ set (5kg component A plus 5kg component B), this product is nontoxic, non-dangerous goods, transported according to general chemicals, stored in a cool (room temperature) dry place, shelf life last for 12 months.

Company Features
1. With strong economic strength, Huizhou SANDAO New Material Co., Ltd has stronger profitability than other competitors in the aspect of manufacturing ge rtv silicone. We have a team of experienced professionals. With years of research, they are knowledgeable about industry trends and the critical issues impacting the manufacturing industry.
2. We have dedicated teams. Representing creative possibility with grounded experience, they allow the company to provide state of the art product analysis, development, and manufacture.
3. Up to now, our business scope covers many overseas markets including the Middle East, Asia, America, Europe, and so on. We will continue to build cooperations with businesses from different countries. We will struggle to make SANDAO this national brand to be worldwide forever. Contact!

Favorable rate

100%

Buyer impression