SANDAO epoxy adhesive production conforms to international manufacturing standards. Therefore, the use of toxic bleaching agents, dyes and other chemicals is limited. It does not cause any corrosion to the material2.
Huizhou SANDAO New Material Co., Ltd's production department can complete work order timely and achieve high quality standard. Its curing exothermic peak is low and the curing shrinkage is small3.
The product will not accumulate bacteria and dust. The small pores of the fibers have high filtration for the small particles or impurities. It is resistant to high temperature and low-temperature alternation4.
This product is less likely to accumulate too much heat. Equipped with a heat sink that can quickly absorb the heat generated and dissipates to the surrounding environment. It has good adhesion to a variety of materials5.
The product is not prone to electrical problems. Its highly-integrated electrical components and insulating materials can effectively help avoid electrical hazards such as static electricity and current leakage. And it can be heat conductive, anti-corrosive, and temperature resistant after curing
Epoxy resin AB adhesive SD811
Epoxy resin AB adhesive SD811 is a two-component high-temperature resistant adhesive based on epoxy resin. It has high strength, weak acid-base resistance, impact resistance, low smell, resistance to most chemical media, extreme temperature and excellent electrical insulation characteristics. Mainly suitable for high temperature resistant metal, ceramic, etc.
◪ Fast curing, wide range of application, high bonding strength, water resistance, oil resistance, fatigue resistance.
◪ Excellent resistance to high and low temperature, can work in the temperature range of 60-150 ℃.
Sandao Epoxy resin AB adhesive are used for bonding of metal, ceramic, glass, electroplating / paint / magnetic materials, such as aircraft motor, automobile, machinery, ship, electronics, electrical apparatus, instrument, building, furniture, toys,. high temperature resistant parts such as railway vehicles ,etc, AB glue can also be used to adhesive water tank, oil road, carburetor, cylinder cover, exhaust pipe, bushing of driving shaft, plastic parts such as baffle, vehicles lamp glass, car handle, etc.
Electroplating paint bonding
Mechanical component bonding
|Epoxy resin AB glue||SD811 part A||SD811 part B|
|Viscosity (mPa.s 25℃)||8000-12000||10000-13000|
|Specific gravity (g/ml 25℃)||1.0-1.05||1.0-1.05|
|Ratio（weight ratio pbw）||1||1|
|Gel time under normal temperature（25℃）20g||45-60mins|
|Curing time|| 80℃||30mins|
|Active hydrogen equivalentg/eq||/||185/195|
|Distortion temperature HDT||80℃|
|Solume resistivity（Ω.cm）25℃||1.0~1015 |
|Surface resistivity（Ω.cm）25℃||0.9×1015 |
|Shear strength of different materials（Mpa）|
|Aluminum / copper||16-19|
Transparent epoxy resin AB glue
SD811 Epoxy AB Adhesive is an epoxy resin two component high Temperature adhesive.
Fast curing speed, wide application range, extreme temperature and excellent electrical insulation characteristics.
Green environmental protection
odorless, non-pollution, high strength, weak acid and alkali resistance, impact resistance, high adhesion strength, water resistance, oil resistance, fatigue resistance.
AB mixing tube
packaging specifications: 64g / tube.
Put on AB glue gun and put on the thread mixing head.
The thickness of adhesive layer should be 0.05mm, the coated object should be clamped immediately, and the maximum bonding strength will be guaranteed by uniform contact pressure.
To obtain the highest mechanical strength, the surface of the material can be polished or sandblasted, and then the dust and oil stains on the surface can be scrubbed with a special solvent.
Adhesive should be put on both sides of the object and fix the splice in avoid of dislocation. Do not mix the lid of A and B to prevent contamination of the adhesive.
1. Epoxy resin AB glue is slightly irritating, please wear gas mask and anticorrosion gloves when operating.
2. Cover at any time after each extraction, lest moisture absorption affect curing and performance.
3. Mass use of this product needs to be in a well-ventilated place.
Packaging and preservation
Epoxy resin AB sealant is packed with AB mixed pipe, 64g/ pcs, transported as non-dangerous goods, should be stored in a dry, shady place (below 5 ℃ ~ 26 ℃), the shelf life is within 12 months from the date of manufacture.Company Features1.
Huizhou SANDAO New Material Co., Ltd is a professional production base and backbone enterprise for emerging Two-component epoxy structure bonding products.2.
Our company has skilled and dedicated product developers and designers. Some of their specialties include rapid conceptualization, technical/control drawings, graphic design, visual brand identity, and product photography.3.
SANDAO now is growing to be a popular ab glue supplier. Check now!