loading
Home  >  PRODUCT Bulk  >  Customized Silicone adhesive series  >  Two-component addition-type potting adhesive TDS Manufacturer  > 

Two-component addition-type potting adhesive TDS  supply for electrical products

Two-component addition-type potting adhesive TDS  supply for electrical products

Two-component addition-type potting adhesive TDS  supply for electrical products

Model number
SD6341
MOQ
1pcs
Color
White/black liquid
Package
1.25kg/ set
Main characteristic
Two-component Ratio is 4:1, no need of vacuum defoaming
Main application
silicon steel materials, roller core materials, coil windings,etc.
Lead time
within a week after payment
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • SANDAO New Material gives priority to customers and runs the business in good faith. We are devoted to providing quality services.
Company Advantages
1. During the production of SANDAO ge rtv silicone, all the materials or parts are strictly sourced from reliable suppliers who hold relevant gifts and crafts certifications and the materials are required to be tested and scrutinized before production.
2. The product poses no risks to the human body. The ingredients have been already tested to contain no harmful substances.
3. With excellent Two-component addition-type potting adhesive TDS, perfect after-sales service, and comprehensive technical support, Huizhou SANDAO New Material Co., Ltd have won the long-term trust and cooperation of customers.
4. Huizhou SANDAO New Material Co., Ltd uses solid cartons to pack Two-component addition-type potting adhesive TDS so as to make sure they are safe enough.

our product

bg


Epoxy resin potting sealant SD6341
Epoxy resin potting sealant SD6341 is a two-component electronic material used for general electronic component sealing and circuit board sealing. It can be cured at room temperature or heated, and the cost is lower. Temperature during curing is low and the highest exothermic temperature is less than 50 ℃. Good surface gloss, low shrinkage, excellent moisture resistance and insulation after curing.

Application

bg


Epoxy resin pouring sealant is widely used in silicon steel materials, roller core materials, coil windings, capacitor bushing and other important radiating and high temperature resistance electronic appliances, such as transformers, motors, radiators, sensors, electromagnets, PCB plates, solenoid valves, air conditioners, power module, electromagnetic clutch, automobile parts, etc.

air conditioning

heat sink

Induction cooker bonding


PCB board bonding

Power module

Motor bonding



product Performance

bg


Characteristics
  • ◪  Two-component 4:1 ratio, 100% solidification, no solvent, no pollution, no toxicity.

  • ◪  Good weather resistance, water resistance, oil resistance, acid resistance, high temperature resistance, insulation, flame retardant, cracking resistance and so on.

  • ◪  Can be cured at room temperature and heating, high bonding strength. Stable performance, good toughness and filling after curing, excellent physical, mechanical and insulation properties.

  •   It has low viscosity after mixing, no need of vacuum defoaming at room temperature, and long operating time, so it’s a kind of ideal pouring glue.

  •   For some larger parts of the pouring and sealing, can be one-time molding, more operational advantages.

  •   Achieve actually measured high thermal conductivity: 0.8w/m.k

General performance
ItemConditionPart APart BMix liquid
AppearanceVisualWhite/black Viscous liquidTransparent / brown liquidWhite/black liquid
Density25℃,g/cm31.64~1.651.11~1.131.59~1.61
Viscosity25℃, mpa.s12000~1300040~120800~1000

Usage: 1.Mixing: mix part A and part B at 4:1 ratio by weight, potting after stir well. The operating time after mixing is 60 minutes at 25 ℃.
2.Solidification: at 25 ℃, it will harden at 6 for 8 hours, and at 80 ℃ for 1 hour. It can be assembled after hardening. Tests typically take place after 24 hours of curing.

Notes:This data is measured by the technicians in the laboratory, which has certain reference value for the users. However, because the usage methods and conditions of each user are different, it is suggested that the users should find out the best technology and method according to their own conditions.


Feature after curing
Itemcondition/unitTest result
HardnessShore-D>80
Volume resistivity25℃,Ω.cm2.8*1015
Breakdown voltage25℃,kv/mm>30
Dielectric constant25℃,1MHZ3.1±0.1
Dielectric loss tangent25℃,1MHZ<0.01
Shear temperature rangeMpa>10
Operating temperature range-40~150
Curing shrinkage%<0.5

Attention: 1, This kind of products are not dangerous goods, according to the general chemical storage and transportation, the storage period is 1 year.
2, A component should be stirred properly before use (as there will be precipitation after long period of time, it does not affect the performance after stir well,); after accurate weighing of component A and component B, please stir well and then use it.
3, The mixing amount of glue should not be too large, otherwise, the operating time will be shortened which lead to waste if cannot use out timely.

Notes:The above performance data are typical data of the product at humidity 70 ℃, temperature 25 ℃,for customer's reference only. Customers are kindly requested to use the measured data.

Product details

bg
Epoxy resin potting and sealing adhesive
SD6341 epoxy potting compound is a two-component electronic material used for Potting of general electronic components And circuit board sealing.
White/black viscous liquid
It can be cured at room temperature, and can be Cured by heating. After curing, the surface gloss Is good, the shrinkage rate is low, and the Moisture resistance and insulation Performance are excellent.
Green environmental protection
Non-toxic, non-corrosive, free of harmful Substances.
Plastic bottle packaging
packaging specifications: 1.25kg/ set.

Company Features
1. Huizhou SANDAO New Material Co., Ltd is a sizable Two-component addition-type potting adhesive TDS manufacturer in China.
2. As a strong technology company, Huizhou SANDAO New Material Co., Ltd continues to improve production efficiency.
3. Relative service for Two-component addition-type potting adhesive TDS will be provided by Huizhou SANDAO New Material Co., Ltd. Please contact. Bearing the mission of Two-component addition-type potting adhesive TDS keeps us passionate everyday. Please contact. Huizhou SANDAO New Material Co., Ltd always be kind to our staff, let alone be kinder to our customers. Please contact.
Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...