SANDAO  > 

AI - Page Sitemap

 > 

Two-component addition-type potting adhesive TDS resin supplier for electronic parts

Two-component addition-type potting adhesive TDS resin supplier for electronic parts

Two-component addition-type potting adhesive TDS resin supplier for electronic parts

Model number
SD6341
MOQ
1pcs
Color
White/black liquid
Package
1.25kg/ set
Main characteristic
Two-component Ratio is 4:1, no need of vacuum defoaming
Main application
silicon steel materials, roller core materials, coil windings,etc.
Lead time
within a week after payment
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Application Scope
The silicone adhesive produced by SANDAO New Material is of high quality and is widely used in the Manufacturing Chemicals Other Chemicals industry.SANDAO New Material is able to meet customers' needs to the greatest extent by providing customers with one-stop and high-quality solutions.
Product Details
SANDAO New Material pays great attention to details of silicone adhesive. silicone adhesive is in line with the stringent quality standards. The price is more favorable than other products in the industry and the cost performance is relatively high.
Company Advantages
1. The design of SANDAO ge rtv silicone always integrates with modern culture and classic folk cultures by the professional designers who have abundant crafts creating experiences.
2. Huizhou SANDAO New Material Co., Ltd has been devoting itself into manufacturing Two-component addition-type potting adhesive TDS which is of ge rtv silicone.
3. People said that they no longer worry about the environmental pollution problem as this product can be properly recycled.

our product

bg


Two-component addition-type potting adhesive TDS resin supplier for electronic parts-1
Epoxy resin potting sealant SD6341
Epoxy resin potting sealant SD6341 is a two-component electronic material used for general electronic component sealing and circuit board sealing. It can be cured at room temperature or heated, and the cost is lower. Temperature during curing is low and the highest exothermic temperature is less than 50 ℃. Good surface gloss, low shrinkage, excellent moisture resistance and insulation after curing.

Application

bg


Epoxy resin pouring sealant is widely used in silicon steel materials, roller core materials, coil windings, capacitor bushing and other important radiating and high temperature resistance electronic appliances, such as transformers, motors, radiators, sensors, electromagnets, PCB plates, solenoid valves, air conditioners, power module, electromagnetic clutch, automobile parts, etc.

Two-component addition-type potting adhesive TDS resin supplier for electronic parts-2

air conditioning

Two-component addition-type potting adhesive TDS resin supplier for electronic parts-3

heat sink

Two-component addition-type potting adhesive TDS resin supplier for electronic parts-4

Induction cooker bonding


Two-component addition-type potting adhesive TDS resin supplier for electronic parts-5

PCB board bonding

Two-component addition-type potting adhesive TDS resin supplier for electronic parts-6

Power module

Two-component addition-type potting adhesive TDS resin supplier for electronic parts-7

Motor bonding



product Performance

bg


Characteristics
  • ◪  Two-component 4:1 ratio, 100% solidification, no solvent, no pollution, no toxicity.

  • ◪  Good weather resistance, water resistance, oil resistance, acid resistance, high temperature resistance, insulation, flame retardant, cracking resistance and so on.

  • ◪  Can be cured at room temperature and heating, high bonding strength. Stable performance, good toughness and filling after curing, excellent physical, mechanical and insulation properties.

  •   It has low viscosity after mixing, no need of vacuum defoaming at room temperature, and long operating time, so it’s a kind of ideal pouring glue.

  •   For some larger parts of the pouring and sealing, can be one-time molding, more operational advantages.

  •   Achieve actually measured high thermal conductivity: 0.8w/m.k

General performance
ItemConditionPart APart BMix liquid
AppearanceVisualWhite/black Viscous liquidTransparent / brown liquidWhite/black liquid
Density25℃,g/cm31.64~1.651.11~1.131.59~1.61
Viscosity25℃, mpa.s12000~1300040~120800~1000

Usage: 1.Mixing: mix part A and part B at 4:1 ratio by weight, potting after stir well. The operating time after mixing is 60 minutes at 25 ℃.
2.Solidification: at 25 ℃, it will harden at 6 for 8 hours, and at 80 ℃ for 1 hour. It can be assembled after hardening. Tests typically take place after 24 hours of curing.

Notes:This data is measured by the technicians in the laboratory, which has certain reference value for the users. However, because the usage methods and conditions of each user are different, it is suggested that the users should find out the best technology and method according to their own conditions.


Feature after curing
Itemcondition/unitTest result
HardnessShore-D>80
Volume resistivity25℃,Ω.cm2.8*1015
Breakdown voltage25℃,kv/mm>30
Dielectric constant25℃,1MHZ3.1±0.1
Dielectric loss tangent25℃,1MHZ<0.01
Shear temperature rangeMpa>10
Operating temperature range-40~150
Curing shrinkage%<0.5

Attention: 1, This kind of products are not dangerous goods, according to the general chemical storage and transportation, the storage period is 1 year.
2, A component should be stirred properly before use (as there will be precipitation after long period of time, it does not affect the performance after stir well,); after accurate weighing of component A and component B, please stir well and then use it.
3, The mixing amount of glue should not be too large, otherwise, the operating time will be shortened which lead to waste if cannot use out timely.

Notes:The above performance data are typical data of the product at humidity 70 ℃, temperature 25 ℃,for customer's reference only. Customers are kindly requested to use the measured data.

Product details

bg
Two-component addition-type potting adhesive TDS resin supplier for electronic parts-8
Epoxy resin potting and sealing adhesive
SD6341 epoxy potting compound is a two-component electronic material used for Potting of general electronic components And circuit board sealing.
Two-component addition-type potting adhesive TDS resin supplier for electronic parts-9
White/black viscous liquid
It can be cured at room temperature, and can be Cured by heating. After curing, the surface gloss Is good, the shrinkage rate is low, and the Moisture resistance and insulation Performance are excellent.
Two-component addition-type potting adhesive TDS resin supplier for electronic parts-10
Green environmental protection
Non-toxic, non-corrosive, free of harmful Substances.
Two-component addition-type potting adhesive TDS resin supplier for electronic parts-11
Plastic bottle packaging
packaging specifications: 1.25kg/ set.

Company Features
1. Fully committed to the development and production of Two-component addition-type potting adhesive TDS, Huizhou SANDAO New Material Co., Ltd is highly regarded among customers.
2. Over the years, our company has built a solid reputation for the commitment to quality, reliability, technical expertise and the best in customer support.
3. We have a unique set of strategic objectives. At this moment, we will upgrade customers services level and find more approach to cater to customers' needs or improve customers' satisfaction. In so doing, we hope to expand the business scope. We will enforce the most strict emission standards. We promise to reduce the total manufacturing emissions significantly in the coming years. We are working hard to be the first choice of customers. Through the effective integration of resources, we constantly improve the service system that features a higher level of professionalism.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...