loading
Home  >  PRODUCT Bulk  >  Customized Silicone adhesive series  >  Two-component addition-type potting adhesive TDS Manufacturer  > 

Two-component addition-type potting adhesive TDS epoxy for rubber parts SANDAO

Two-component addition-type potting adhesive TDS epoxy for rubber parts SANDAO

Two-component addition-type potting adhesive TDS epoxy for rubber parts SANDAO

Model number
SD6341
MOQ
1pcs
Color
White/black liquid
Package
1.25kg/ set
Main characteristic
Two-component Ratio is 4:1, no need of vacuum defoaming
Main application
silicon steel materials, roller core materials, coil windings,etc.
Lead time
within a week after payment
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
SANDAO New Material is certified by various qualifications. We have advanced production technology and great production capability. silicone adhesive has many advantages such as reasonable structure, excellent performance, good quality, and affordable price.Compared with other products in the same category, silicone adhesive has outstanding advantages which are mainly reflected in the following points.
  • v s
Company Advantages
1. The production of SANDAO ge rtv silicone not only meets the requirements of GB and IEC standards, but meets the UL safety certification.
2. The product has good flexibility and bendability. The materials used in it are soft and features remarkable tensile strength, making it highly resistant to flex.
3. The product has one of a kind look. Each piece of the timber has unique and different wooden textures, with the addition of different timber cutting methods, its appearance is distinctive.
4. Huizhou SANDAO New Material Co., Ltd applies advanced ge rtv silicone software provides customers with inspections for Two-component addition-type potting adhesive TDS.
5. SANDAO New Material's great advantages are created with good raw materials from abroad and international advanced equipment.

our product

bg


Epoxy resin potting sealant SD6341
Epoxy resin potting sealant SD6341 is a two-component electronic material used for general electronic component sealing and circuit board sealing. It can be cured at room temperature or heated, and the cost is lower. Temperature during curing is low and the highest exothermic temperature is less than 50 ℃. Good surface gloss, low shrinkage, excellent moisture resistance and insulation after curing.

Application

bg


Epoxy resin pouring sealant is widely used in silicon steel materials, roller core materials, coil windings, capacitor bushing and other important radiating and high temperature resistance electronic appliances, such as transformers, motors, radiators, sensors, electromagnets, PCB plates, solenoid valves, air conditioners, power module, electromagnetic clutch, automobile parts, etc.

air conditioning

heat sink

Induction cooker bonding


PCB board bonding

Power module

Motor bonding



product Performance

bg


Characteristics
  • ◪  Two-component 4:1 ratio, 100% solidification, no solvent, no pollution, no toxicity.

  • ◪  Good weather resistance, water resistance, oil resistance, acid resistance, high temperature resistance, insulation, flame retardant, cracking resistance and so on.

  • ◪  Can be cured at room temperature and heating, high bonding strength. Stable performance, good toughness and filling after curing, excellent physical, mechanical and insulation properties.

  •   It has low viscosity after mixing, no need of vacuum defoaming at room temperature, and long operating time, so it’s a kind of ideal pouring glue.

  •   For some larger parts of the pouring and sealing, can be one-time molding, more operational advantages.

  •   Achieve actually measured high thermal conductivity: 0.8w/m.k

General performance
ItemConditionPart APart BMix liquid
AppearanceVisualWhite/black Viscous liquidTransparent / brown liquidWhite/black liquid
Density25℃,g/cm31.64~1.651.11~1.131.59~1.61
Viscosity25℃, mpa.s12000~1300040~120800~1000

Usage: 1.Mixing: mix part A and part B at 4:1 ratio by weight, potting after stir well. The operating time after mixing is 60 minutes at 25 ℃.
2.Solidification: at 25 ℃, it will harden at 6 for 8 hours, and at 80 ℃ for 1 hour. It can be assembled after hardening. Tests typically take place after 24 hours of curing.

Notes:This data is measured by the technicians in the laboratory, which has certain reference value for the users. However, because the usage methods and conditions of each user are different, it is suggested that the users should find out the best technology and method according to their own conditions.


Feature after curing
Itemcondition/unitTest result
HardnessShore-D>80
Volume resistivity25℃,Ω.cm2.8*1015
Breakdown voltage25℃,kv/mm>30
Dielectric constant25℃,1MHZ3.1±0.1
Dielectric loss tangent25℃,1MHZ<0.01
Shear temperature rangeMpa>10
Operating temperature range-40~150
Curing shrinkage%<0.5

Attention: 1, This kind of products are not dangerous goods, according to the general chemical storage and transportation, the storage period is 1 year.
2, A component should be stirred properly before use (as there will be precipitation after long period of time, it does not affect the performance after stir well,); after accurate weighing of component A and component B, please stir well and then use it.
3, The mixing amount of glue should not be too large, otherwise, the operating time will be shortened which lead to waste if cannot use out timely.

Notes:The above performance data are typical data of the product at humidity 70 ℃, temperature 25 ℃,for customer's reference only. Customers are kindly requested to use the measured data.

Product details

bg
Epoxy resin potting and sealing adhesive
SD6341 epoxy potting compound is a two-component electronic material used for Potting of general electronic components And circuit board sealing.
White/black viscous liquid
It can be cured at room temperature, and can be Cured by heating. After curing, the surface gloss Is good, the shrinkage rate is low, and the Moisture resistance and insulation Performance are excellent.
Green environmental protection
Non-toxic, non-corrosive, free of harmful Substances.
Plastic bottle packaging
packaging specifications: 1.25kg/ set.

Company Features
1. As one of the promising enterprise that is specialized in providing Two-component addition-type potting adhesive TDS, SANDAO has been doing the utmost to improve itself.
2. Huizhou SANDAO New Material Co., Ltd has a proficient and trustworthy staff team.
3. Focusing on building a future-oriented Two-component addition-type potting adhesive TDS is our aim. Check it! Adhering to the principle of ge rtv silicone will be conducive to the improvement of SANDAO. Check it!
Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...