SANDAO  > 

AI - Page Sitemap

 > 

Two-component addition-type potting adhesive TDS epoxy for electroplating

Two-component addition-type potting adhesive TDS epoxy for electroplating

Two-component addition-type potting adhesive TDS epoxy for electroplating

Model number
SD6341
MOQ
1pcs
Color
White/black liquid
Package
1.25kg/ set
Main characteristic
Two-component Ratio is 4:1, no need of vacuum defoaming
Main application
silicon steel materials, roller core materials, coil windings,etc.
Lead time
within a week after payment
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
silicone adhesive is a truly cost-effective product. It is processed in strict accordance with relevant industry standards and is up to the national quality control standards. The quality is guaranteed and the price is really favorable.Compared with similar products, SANDAO New Material's silicone adhesive has the following advantages.
  • v s
Application Scope
silicone adhesive developed by SANDAO New Material is widely used, mainly in the following scenes.SANDAO New Material always provides customers with reasonable and efficient one-stop solutions based on the professional attitude.
Company Advantages
1. With its key component being ge rtv silicone, Two-component addition-type potting adhesive TDS has a good performance on ge rtv silicone.
2. The product offers high stability. It is made of slip-proof materials that can enhance shoe or foot traction, which effectively prevents slipping.
3. The sales of the Two-component addition-type potting adhesive TDS also contributes to the quality of the service.
4. Quality feedback collecting will made to improve quality accordingly for Two-component addition-type potting adhesive TDS.

our product

bg


Two-component addition-type potting adhesive TDS epoxy for electroplating-1
Epoxy resin potting sealant SD6341
Epoxy resin potting sealant SD6341 is a two-component electronic material used for general electronic component sealing and circuit board sealing. It can be cured at room temperature or heated, and the cost is lower. Temperature during curing is low and the highest exothermic temperature is less than 50 ℃. Good surface gloss, low shrinkage, excellent moisture resistance and insulation after curing.

Application

bg


Epoxy resin pouring sealant is widely used in silicon steel materials, roller core materials, coil windings, capacitor bushing and other important radiating and high temperature resistance electronic appliances, such as transformers, motors, radiators, sensors, electromagnets, PCB plates, solenoid valves, air conditioners, power module, electromagnetic clutch, automobile parts, etc.

Two-component addition-type potting adhesive TDS epoxy for electroplating-2

air conditioning

Two-component addition-type potting adhesive TDS epoxy for electroplating-3

heat sink

Two-component addition-type potting adhesive TDS epoxy for electroplating-4

Induction cooker bonding


Two-component addition-type potting adhesive TDS epoxy for electroplating-5

PCB board bonding

Two-component addition-type potting adhesive TDS epoxy for electroplating-6

Power module

Two-component addition-type potting adhesive TDS epoxy for electroplating-7

Motor bonding



product Performance

bg


Characteristics
  • ◪  Two-component 4:1 ratio, 100% solidification, no solvent, no pollution, no toxicity.

  • ◪  Good weather resistance, water resistance, oil resistance, acid resistance, high temperature resistance, insulation, flame retardant, cracking resistance and so on.

  • ◪  Can be cured at room temperature and heating, high bonding strength. Stable performance, good toughness and filling after curing, excellent physical, mechanical and insulation properties.

  •   It has low viscosity after mixing, no need of vacuum defoaming at room temperature, and long operating time, so it’s a kind of ideal pouring glue.

  •   For some larger parts of the pouring and sealing, can be one-time molding, more operational advantages.

  •   Achieve actually measured high thermal conductivity: 0.8w/m.k

General performance
ItemConditionPart APart BMix liquid
AppearanceVisualWhite/black Viscous liquidTransparent / brown liquidWhite/black liquid
Density25℃,g/cm31.64~1.651.11~1.131.59~1.61
Viscosity25℃, mpa.s12000~1300040~120800~1000

Usage: 1.Mixing: mix part A and part B at 4:1 ratio by weight, potting after stir well. The operating time after mixing is 60 minutes at 25 ℃.
2.Solidification: at 25 ℃, it will harden at 6 for 8 hours, and at 80 ℃ for 1 hour. It can be assembled after hardening. Tests typically take place after 24 hours of curing.

Notes:This data is measured by the technicians in the laboratory, which has certain reference value for the users. However, because the usage methods and conditions of each user are different, it is suggested that the users should find out the best technology and method according to their own conditions.


Feature after curing
Itemcondition/unitTest result
HardnessShore-D>80
Volume resistivity25℃,Ω.cm2.8*1015
Breakdown voltage25℃,kv/mm>30
Dielectric constant25℃,1MHZ3.1±0.1
Dielectric loss tangent25℃,1MHZ<0.01
Shear temperature rangeMpa>10
Operating temperature range-40~150
Curing shrinkage%<0.5

Attention: 1, This kind of products are not dangerous goods, according to the general chemical storage and transportation, the storage period is 1 year.
2, A component should be stirred properly before use (as there will be precipitation after long period of time, it does not affect the performance after stir well,); after accurate weighing of component A and component B, please stir well and then use it.
3, The mixing amount of glue should not be too large, otherwise, the operating time will be shortened which lead to waste if cannot use out timely.

Notes:The above performance data are typical data of the product at humidity 70 ℃, temperature 25 ℃,for customer's reference only. Customers are kindly requested to use the measured data.

Product details

bg
Two-component addition-type potting adhesive TDS epoxy for electroplating-8
Epoxy resin potting and sealing adhesive
SD6341 epoxy potting compound is a two-component electronic material used for Potting of general electronic components And circuit board sealing.
Two-component addition-type potting adhesive TDS epoxy for electroplating-9
White/black viscous liquid
It can be cured at room temperature, and can be Cured by heating. After curing, the surface gloss Is good, the shrinkage rate is low, and the Moisture resistance and insulation Performance are excellent.
Two-component addition-type potting adhesive TDS epoxy for electroplating-10
Green environmental protection
Non-toxic, non-corrosive, free of harmful Substances.
Two-component addition-type potting adhesive TDS epoxy for electroplating-11
Plastic bottle packaging
packaging specifications: 1.25kg/ set.

Company Features
1. Huizhou SANDAO New Material Co., Ltd products excellence performance Two-component addition-type potting adhesive TDS.
2. Our design team is highly talented to bring out the best designs. They work hard in an iterative way, constantly evolving and refining to ensure we create a design that exceeds both customers' needs and expectations.
3. Huizhou SANDAO New Material Co., Ltd has made a strong decision to become the most competitive company in its service. Get more info! Huizhou SANDAO New Material Co., Ltd continuously introduces the latest technology to ensure the quality of Two-component addition-type potting adhesive TDS. Get more info!
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...