SANDAO gas resistant rtv must go through these following production stages, including metal materials procurement and preparation, components machining, surface polishing, and assembly. 2.
Our quality analysts conduct regular checking of the product on various quality parameters. 3.
Huizhou SANDAO New Material Co., Ltd has established a globally independent brand with superior products and services. 4.
Comparing with other brand suppliers, direct factory price is Huizhou SANDAO New Material Co., Ltd's advantage.
High temperature resistant heat conductive silicone grease SD920
High temperature resistant heat conductive silicone grease SD920 is single component which is made from imported silicone as the main body, filling materials, thermal conductive materials and other polymer materials. It’s compound of organosiloxane and metal oxides which with good thermal conductivity and insulation. This grease has excellent thermal conductivity, no curing, no powdering, high temperature resistance, low adhesion pressure, oxidation resistance, no air drying, no hardening or melting, low thermal resistance, good electrical insulation, Wide operating temperature (-50 ℃ ~ 200 ℃), good stability, low consistency and good operation performance. The silicone grease is non-toxic, non-corrosive, tasteless, never curing and insoluble.
Sandao thermal conductive silicone grease is widely used to fill the gap between power heating element and radiator, especially used for high power LED heat dissipation or coating to derive the heat produced by components. Such as CPU and radiator gap filling, high-power transistor, thyristor element, diode and substrate (aluminum, copper) converter, power module, oven, induction cooker, coffee pot gap filling, TV power amplifier tube and heat sink, Semiconductor refrigeration, etc. Reduce the working temperature of the heating element.
LED heat dissipation gap filling
|Break down strength（kv/mm）||≥2.0|
General purpose thermal grease
SD920 general-purpose thermal grease uses imported silicone-based one-component silicone thermal grease.
Green environmental protection
Non-toxic, non-corrosive, odorless, non-drying, insolubilization, low consistency.
Excellent thermal conductivity, non curing, high temperature resistance, low adhesion pressure, low thermal resistance, good electrical insulativity.
Iron bottle packaging
packaging specifications: 1.0kg / can.
Clean the surface, remove the greasy dirt, then extrude thermal conductive silicon grease directly.
The uniform coating should be applied to the surface. The coating can be brushed, scraped or rolled as needed.
If the user uses silicone oil to dilute, not only occur oil separation easily, but also make the thermal conductivity smaller. Therefore, we suggest customers choose their ideal models to ensure the using quality.
The coating surface should be uniform, coating more isn’t mean the better, but in the premise of filling the surface gap, coating a thin layer is enough.
Packaging and preservation
Packing specification: 1.0kg/ can, negotiable to according to the user's needs.
Storage: store in a cool and dry place for one year.
Note: The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you.
SANDAO now has been selected as one of the most popular Thermal conductive material TDS manufacturer. 2.
When speaking of quality, Thermal conductive material TDS is the best. 3.
SANDAO New Material will develop horizontally to meet the needs of foreign trade market. Please contact. SANDAO aims to advance in exporting Thermal conductive material TDS. Please contact.