what is rtv silicone | One-component RTV silicone rubber TDS

Product Details

silicone rubber's outstanding quality is shown in the details.SANDAO New Material's silicone rubber is commonly praised in the market due to good materials, fine workmanship, reliable quality, and favorable price.

Product Comparison

SANDAO New Material has the ability to meet different needs. ms adhesive is available in multiple types and specifications. The quality is reliable and the price is reasonable.SANDAO New Material guarantees silicone rubber to be high-quality by carrying out highly standardized production. Compared with other products in the same category, it has the following advantages.

Company Advantages
1. The design of One-component RTV silicone rubber TDS is completed by famous designers from international companies.
2. The product features enough durability. Its components such as padding, eyelets, upper surface are firmly sewn or glued together to be used for a long time.
3. Supported by ingenious team, SANDAO has highly recommended service team.
4. Huizhou SANDAO New Material Co., Ltd provides the best possible environment for our staff, so we can focus on you.

our product

Thermal conductive silica gel SD916

Thermal conductive silica gel SD916 has both bonding and good thermal (heat dissipation) properties. The thermal conductive silica gel is a reinforced neutral silicone elastic rubber. After curing, the rubber has good resistance to high and low temperature changes. It will not fall off after long-term use, and will not cause contact gaps to reduce heat dissipation.

Application

The most important application is to replace the thermal grease (paste) for the filling and bonding between the CPU and the heat sink, the thyristor intelligent control module and the heat sink, the high-power electrical module and the heat sink.

Microwave oven adhesive seal

Radiator filling and bonding

Refrigerator bonding seal

Semiconductor material bonding

Thyristor filling and bonding

CPU bonding

product Performance

Type	SD916	SD9201	SD920
Color	white	white	white
Viscosity（cp）	paste	paste	semi-fluid
Density（g/cm3）	2.0～2.5	2.0～2.5	3.0～3.5
Tack-free time（25℃，min）	≤30	≤30	≤30
Tensile strength (MPa)	≥2.5	≥2.5	≥2.5
Elongation（%）	≥100	≥100	≥100
Shear strength（MPa）	≥1.5	≥1.5	≥1.5
Hardness (shore A)	50～65	50～65	50～65
Temperature range（℃）	-60～280	-60～280	-60～280
Dielectric intesity（kV/mm）	≥18	≥18	≥18
Permittivity（@60Hz）	2.8	2.8	2.8
Volume Resistance（Ω.cm）	1×10¹⁵	1×10¹⁵	1×10¹⁵
Thermal conductivity（w/(m.k)）	1.2	0.8	2.0

Product details

Thermal conductivity paste

SD916 thermal silica gel is a one-component Room temperature curing adhesive It has both bonding and good thermal (heat dissipation) properties.

Eco-environmental protection

Neutral non-corrosive, odorless, non-pollution,Is a reinforced neutral silicone elastic rubber.

White paste

After curing, it has excellent resistance to high and low temperature, will not fall off after long-term use, and will not produce bonding gap to reduce heat dissipation effect.

Metal hose packaging

Packaging specifications: 100g /tube, 310ml/ plastic cartridge,2.6L/ bottle

Use instructions

Cleaning the surface of the adhered or coated object to remove rust, dust and oil.
Unscrew the rubber cap and squeeze the glue onto the cleaned surface to make it evenly distributed.
Place the glued or sealed parts in the air to allow them to cure naturally. The curing process is a curing process from the surface to the inside. The glue will cure to a depth of 2-4 mm within 24 hours (room temperature and 55% relative humidity). If the position is deep, especially in areas where air is not easily accessible, The time to complete cure will be extended, and if the temperature is lower, the cure time will also be extended.

Notes:

1. Keep thermal paste out of reach of children.
2. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.

Company Features
1. Up to now, Huizhou SANDAO New Material Co., Ltd has cooperated with many famous companies for One-component RTV silicone rubber TDS.
2. Our manufacturing members are highly trained and are familiar with complex and sophisticated new machine tools. This allows us to quickly provide the best results for our customers.
3. Huizhou SANDAO New Material Co., Ltd will expand the market with the most reliable products with star standards. Get quote! The guarantee of good service functions importantly during the development of SANDAO. Get quote!

k******p

The fibers of SANDAO One-component RTV silicone rubber TDS will be rigorously tested before used. The fibers are checked using various methods such as combustion, dissolution, staining, or infrared spectrometry method. With a long service life, it ensures the vehicle to look stunning for years

l******l

SANDAO One-component RTV silicone rubber TDS will go through a series of tests after produced. It is scrutinized in terms of colorfastness, dimensional stability, appearance after washing, quality of thread and yarns, etc. It effectively reduces the air resistance of the vehicle during driving

u******v

During the production of SANDAO what is rtv silicone, strict quality tests are conducted. These tests include yarn density, gram weight, structure strength, shrinkage of the cloth, tearing strength, etc. Made of carbon fiber material, it has the color that is all the way through its body

e******h

Throughout the entire production process, SANDAO what is rtv silicone is under rigorous scrutinization, including the quality of dyeing pigments, weaving technique, and waste treatment. The product is best known for its light weight and hardness

p******q

SANDAO what is rtv silicone is completed by passing through several basic processes. It will go through cutting, sewing, fiber washing, dyeing, and decorating. The product is not prone to crack

h******x

We have a complete cost control system and insist on strictly controlling the production cost of each link of what is rtv silicone, so that the final production what is rtv silicone has a higher cost performance.

Product Message

*Name

Phone

*E-mail

*Content