rtv silicone rubber ,what is rtv silicone

Enterprise Strength

SANDAO New Material focuses on the internal management and opens up the market. We actively explore innovative thinking and fully introduce modern management mode. We continuously achieve development in the competition based on strong technical capability, high-quality products, and comprehensive and thoughtful services.

Product Comparison

SANDAO New Material carries out strict quality monitoring and cost control on each production link of ms adhesive, from raw material purchase, production and processing and finished product delivery to packaging and transportation. This effectively ensures the product has better quality and more favorable price than other products in the industry.Compared with products in the same category,SANDAO New Material's ms adhesive's outstanding advantages are as follows.

Company Advantages
1. rtv silicone rubber produced by Huizhou SANDAO New Material Co., Ltd are mainly composed of what is rtv silicone materials.
2. The product performs well and has a long service life and internationally-proven quality.
3. This product adds an elegant touch to people's outfit and immediately draw attention, making people stand out from the crowd and feel special.

our product

Thermal conductive silica gel SD916

Thermal conductive silica gel SD916 has both bonding and good thermal (heat dissipation) properties. The thermal conductive silica gel is a reinforced neutral silicone elastic rubber. After curing, the rubber has good resistance to high and low temperature changes. It will not fall off after long-term use, and will not cause contact gaps to reduce heat dissipation.

Application

The most important application is to replace the thermal grease (paste) for the filling and bonding between the CPU and the heat sink, the thyristor intelligent control module and the heat sink, the high-power electrical module and the heat sink.

Microwave oven adhesive seal

Radiator filling and bonding

Refrigerator bonding seal

Semiconductor material bonding

Thyristor filling and bonding

CPU bonding

product Performance

Type	SD916	SD9201	SD920
Color	white	white	white
Viscosity（cp）	paste	paste	semi-fluid
Density（g/cm3）	2.0～2.5	2.0～2.5	3.0～3.5
Tack-free time（25℃，min）	≤30	≤30	≤30
Tensile strength (MPa)	≥2.5	≥2.5	≥2.5
Elongation（%）	≥100	≥100	≥100
Shear strength（MPa）	≥1.5	≥1.5	≥1.5
Hardness (shore A)	50～65	50～65	50～65
Temperature range（℃）	-60～280	-60～280	-60～280
Dielectric intesity（kV/mm）	≥18	≥18	≥18
Permittivity（@60Hz）	2.8	2.8	2.8
Volume Resistance（Ω.cm）	1×10¹⁵	1×10¹⁵	1×10¹⁵
Thermal conductivity（w/(m.k)）	1.2	0.8	2.0

Product details

Thermal conductivity paste

SD916 thermal silica gel is a one-component Room temperature curing adhesive It has both bonding and good thermal (heat dissipation) properties.

Eco-environmental protection

Neutral non-corrosive, odorless, non-pollution,Is a reinforced neutral silicone elastic rubber.

White paste

After curing, it has excellent resistance to high and low temperature, will not fall off after long-term use, and will not produce bonding gap to reduce heat dissipation effect.

Metal hose packaging

Packaging specifications: 100g /tube, 310ml/ plastic cartridge,2.6L/ bottle

Use instructions

Cleaning the surface of the adhered or coated object to remove rust, dust and oil.
Unscrew the rubber cap and squeeze the glue onto the cleaned surface to make it evenly distributed.
Place the glued or sealed parts in the air to allow them to cure naturally. The curing process is a curing process from the surface to the inside. The glue will cure to a depth of 2-4 mm within 24 hours (room temperature and 55% relative humidity). If the position is deep, especially in areas where air is not easily accessible, The time to complete cure will be extended, and if the temperature is lower, the cure time will also be extended.

Notes:

1. Keep thermal paste out of reach of children.
2. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.

Company Features
1. With the high-end technology, SANDAO has won wide recognition from customers with the exquisite rtv silicone rubber .
2. Huizhou SANDAO New Material Co., Ltd has a very refined apparatus.
3. Since the inception till now, we have been adhering to the principle of integrity. We always conduct business trade in accordance with fair and refuse any vicious business competition. We inspire ourselves on values that reinforce cooperation and success. These values are embraced by each member of our company, and this makes our company so unique. Welcome to visit our factory!

m******p

The material of what is rtv silicone allows what is rtv silicone to make itself what is rtv silicone. Offering effective and reliable performance, it is suitable for dental use

g******c

No other similar what is rtv silicone has been able to equal its what is rtv silicone. It will not easily cause any infection and microbial contamination

q******b

rtv silicone rubber is what is rtv silicone, and especially fits for the usage in what is rtv silicone. This product can effectively fight against teeth disease

r******y

This product stands out for its exceptional durability The body frame of what is rtv silicone can be what is rtv silicone.

h******n

rtv silicone rubber are likely to possess features likewhat is rtv silicone. It can be disinfected under high temperatures

g******r

The product has the characteristics of long service, excellent performance and stable performance. Offering effective and reliable performance, it is suitable for dental use

Product Message

*Name

Phone

*E-mail

*Content