Thermal conductive material TDS | Thermal conductive material TDS

Product Information
Customer Reviews

Company Advantages
1. SANDAO gas resistant rtv will go through a series of quality test before shipping, including salt spray, surface wear, electroplating as well as surface painting test. It should be fully cured before realizing its use value
2. It has distinguished competitiveness and has received much attention. And it can be heat conductive, anti-corrosive, and temperature resistant after curing
3. gas resistant rtv makes Thermal conductive material TDS to be able to process tasks comprehensively and efficiently. Water absorption and coefficient of linear expansion of this product are small
4. Being qualified with gas resistant rtv makes Thermal conductive material TDS consequent to be the fashion trend. The product has achieved the requirement of mechanical property completely

our product

High thermal conductivity silicone grease SD930

High thermal conductivity silicone grease SD930 is made by imported raw materials and formula .It’s compound of organosiloxane and metal oxides which with good thermal conductivity,good insulation thin coating thickness. This grease has excellent thermal conductivity, no curing, no powdering, high temperature resistance, low adhesion pressure, oxidation resistance, no air drying, no hardening or melting, low thermal resistance, good electrical insulation, wide operating temperature (-50 ℃ ~ 200 ℃), good stability, low consistency and good operation performance. The silicone grease is non-toxic, non-corrosive, tasteless, never curing and insoluble.

Application

Thermal conductive silicone grease is widely used to fill the gap between power heating element and radiator, especially used for high power LED heat dissipation or coating to derive the heat produced by components. Such as CPU and radiator gap filling, high-power transistor, thyristor element, diode and substrate (aluminum, copper) converter, power module, oven, induction cooker, coffee pot gap filling, TV power amplifier tube and heat sink, Semiconductor refrigeration, etc. Reduce the working temperature of the heating element.

High power triode

LED heat dissipation gap filling

Power module

Oven gap filling

Thyristor component

CPU gap filling

product Performance

Performance	Test data
Appearance	Gray paste
Penetration degree（1/10mm，25℃）	300～350
Specific gravity（g/cm3）	3-3.5
Bleed（%。150℃，8h）	≤2.0
Fugitive constituent（%。150℃，8h）	≤2.0
Break down strength（kv/mm）	≥2.0
Volume resistivity（Ω.cm）	4×10¹⁴
Thermal conductivity（w/m·k）	≥3.0

Product details

General purpose thermal grease

SD930 general-purpose thermal grease uses imported silicone-based one-component silicone thermal conductive grease.

Green environmental protection

Non-toxic, non-corrosive, odorless, non drying, insolublilization, low consistency.

Gray paste

Fully transparent and trace-free, epoxy resin is resistant to most chemicals and solvents and is resistant to temperatures from -40 to 120 °C.

Iron bottle packaging

packaging specifications: 1.0kg /can.

Use instructions

Clean the surface, remove the greasy dirt, then extrude thermal conductive silicon grease directly.
The uniform coating should be applied to the surface. The coating can be brushed, scraped or rolled as needed.
If the user uses silicone oil to dilute, not only occur oil separation easily, but also make the thermal conductivity smaller. Therefore, we suggest customers choose their ideal models to ensure the using quality.

Caution

The coating surface should be uniform, coating more isn’t mean the better, but in the premise of filling the surface gap, coating a thin layer is enough.

Packaging and preservation

Packing specification: 1.0kg/ can, negotiable to according to the user's needs.

Storage: store in a cool and dry place for one year.

Note: The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you.

Company Features
1. Huizhou SANDAO New Material Co., Ltd is the world's largest producer of Thermal conductive material TDS, with a magnificent gas resistant rtv production.
2. Under the strict quality management, SANDAO Thermal conductive material TDS enjoy high performance with finest quality.
3. Continuous innovation and improvement is our goal. We hope to provide our customers with creative and distinctive products by improving our R&D capability. Please contact.

Favorable rate

100%

Buyer impression