Thermal conductive material TDS grease vendor for coffee pot gap filling

Product Comparison

SANDAO New Material has professional production workshops and great production technology. ms adhesive we produce, in line with the national quality inspection standards, has reasonable structure, stable performance, good safety, and high reliability. It is also available in a wide range of types and specifications. Customers' diverse needs can be fully fulfilled.SANDAO New Material guarantees silicone rubber to be high-quality by carrying out highly standardized production. Compared with other products in the same category, it has the following advantages.

Company Advantages
1. Different high technologies are used in the production of SANDAO gas resistant rtv. In order to enhance its adjusting ability and compatibility with the power grid, it makes full use of the comprehensive technical support technology for solar power generation.
2. The light transmittance of the plate of this product can reach a high level, and its material can effectively eliminate the scattering in all directions.
3. With the benefit of increasing production efficiency and output, the product is widely applied in the production of many industries.

our product

Thermal conductive material TDS grease vendor for coffee pot gap filling-1

High temperature resistant heat conductive silicone grease SD920

High temperature resistant heat conductive silicone grease SD920 is single component which is made from imported silicone as the main body, filling materials, thermal conductive materials and other polymer materials. It’s compound of organosiloxane and metal oxides which with good thermal conductivity and insulation. This grease has excellent thermal conductivity, no curing, no powdering, high temperature resistance, low adhesion pressure, oxidation resistance, no air drying, no hardening or melting, low thermal resistance, good electrical insulation, Wide operating temperature (-50 ℃ ~ 200 ℃), good stability, low consistency and good operation performance. The silicone grease is non-toxic, non-corrosive, tasteless, never curing and insoluble.

Application

Sandao thermal conductive silicone grease is widely used to fill the gap between power heating element and radiator, especially used for high power LED heat dissipation or coating to derive the heat produced by components. Such as CPU and radiator gap filling, high-power transistor, thyristor element, diode and substrate (aluminum, copper) converter, power module, oven, induction cooker, coffee pot gap filling, TV power amplifier tube and heat sink, Semiconductor refrigeration, etc. Reduce the working temperature of the heating element.

Thermal conductive material TDS grease vendor for coffee pot gap filling-2

High power triode

Thermal conductive material TDS grease vendor for coffee pot gap filling-3

Induction cooker

Thermal conductive material TDS grease vendor for coffee pot gap filling-4

Oven gap filling

Thermal conductive material TDS grease vendor for coffee pot gap filling-5

LED heat dissipation gap filling

Thermal conductive material TDS grease vendor for coffee pot gap filling-6

Power module

Thermal conductive material TDS grease vendor for coffee pot gap filling-7

CPU gap filling

product Performance

Performance	Test data
Appearance	Gray paste
Penetration degree（1/10mm，25℃）	280～340
Specific gravity（g/cm3）	2.6-3.0
Bleed（%。150℃，8h）	≤2.0
Fugitive constituent（%。150℃，8h）	≤2.0
Break down strength（kv/mm）	≥2.0
Volume resistivity（Ω.cm）	4×10¹⁴
Thermal conductivity（w/m·k）	≥2.0

Product details

Thermal conductive material TDS grease vendor for coffee pot gap filling-8

General purpose thermal grease

SD920 general-purpose thermal grease uses imported silicone-based one-component silicone thermal grease.

Thermal conductive material TDS grease vendor for coffee pot gap filling-9

Green environmental protection

Non-toxic, non-corrosive, odorless, non-drying, insolubilization, low consistency.

Thermal conductive material TDS grease vendor for coffee pot gap filling-10

Gray paste

Excellent thermal conductivity, non curing, high temperature resistance, low adhesion pressure, low thermal resistance, good electrical insulativity.

Thermal conductive material TDS grease vendor for coffee pot gap filling-11

Iron bottle packaging

packaging specifications: 1.0kg / can.

Use instructions

Clean the surface, remove the greasy dirt, then extrude thermal conductive silicon grease directly.
The uniform coating should be applied to the surface. The coating can be brushed, scraped or rolled as needed.
If the user uses silicone oil to dilute, not only occur oil separation easily, but also make the thermal conductivity smaller. Therefore, we suggest customers choose their ideal models to ensure the using quality.

Caution

The coating surface should be uniform, coating more isn’t mean the better, but in the premise of filling the surface gap, coating a thin layer is enough.

Packaging and preservation

Packing specification: 1.0kg/ can, negotiable to according to the user's needs.

Storage: store in a cool and dry place for one year.

Note: The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you.

Company Features
1. Huizhou SANDAO New Material Co., Ltd is proud to be recognized as one of the leaders in this industry. We have years of gas resistant rtv manufacturing experience.
2. We’re proud of the efficiency and productivity of our manufacturing facilities. With a unique combination of state-of-the-art technology and equipment of these facilities, they allow our people to work together to ensure the highest product quality.
3. To pursue gas resistant rtv, gas resistant rtv will be the eternal tenet of Huizhou SANDAO New Material Co., Ltd. Inquire now! Perfect after-sale service makes Huizhou SANDAO New Material Co., Ltd win more trust form our customers. Inquire now! Huizhou SANDAO New Material Co., Ltd pays attention to train our staff from time to time for new technology. Inquire now!

h******l

SANDAO Thermal conductive material TDS is with carefully finished details and quality design that suits international tastes.

f******f

Any color and any size are available for Thermal conductive material TDS.

x******b

SANDAO Thermal conductive material TDS has a user-centric and product-centric design.

a******k

Thermal conductive material TDS achieves to a high level in terms of quality and safety.

g******v

The production speed of SANDAO gas resistant rtv is guaranteed by advanced technology.

x******p

This product has great strength. The materials used for has the strength to resist externally applied loads without breaking or yielding.

Product Message

*Name

Phone

*E-mail

*Content