High thermal conductivity silicone grease SD930

Product Information
Customer Reviews

Enterprise Strength

SANDAO New Material abides by the service principle of 'customers from afar should be treated as distinguished guests'. We continuously improve the service model to provide quality services for customers.

Company Advantages
1. SANDAO gas resistant rtv is specifically designed to meet the needs of customers, featuring innovation and functionality.
2. The quality of this product will be strictly inspected before loading.
3. This product has brilliant market prospects and opportunities for development.
4. The product is applicable with high efficiency.

our product

High thermal conductivity silicone grease SD930

High thermal conductivity silicone grease SD930 is made by imported raw materials and formula .It’s compound of organosiloxane and metal oxides which with good thermal conductivity,good insulation thin coating thickness. This grease has excellent thermal conductivity, no curing, no powdering, high temperature resistance, low adhesion pressure, oxidation resistance, no air drying, no hardening or melting, low thermal resistance, good electrical insulation, wide operating temperature (-50 ℃ ~ 200 ℃), good stability, low consistency and good operation performance. The silicone grease is non-toxic, non-corrosive, tasteless, never curing and insoluble.

Application

Thermal conductive silicone grease is widely used to fill the gap between power heating element and radiator, especially used for high power LED heat dissipation or coating to derive the heat produced by components. Such as CPU and radiator gap filling, high-power transistor, thyristor element, diode and substrate (aluminum, copper) converter, power module, oven, induction cooker, coffee pot gap filling, TV power amplifier tube and heat sink, Semiconductor refrigeration, etc. Reduce the working temperature of the heating element.

High power triode

LED heat dissipation gap filling

Power module

Oven gap filling

Thyristor component

CPU gap filling

product Performance

Performance	Test data
Appearance	Gray paste
Penetration degree（1/10mm，25℃）	300～350
Specific gravity（g/cm3）	3-3.5
Bleed（%。150℃，8h）	≤2.0
Fugitive constituent（%。150℃，8h）	≤2.0
Break down strength（kv/mm）	≥2.0
Volume resistivity（Ω.cm）	4×10¹⁴
Thermal conductivity（w/m·k）	≥3.0

Product details

General purpose thermal grease

SD930 general-purpose thermal grease uses imported silicone-based one-component silicone thermal conductive grease.

Green environmental protection

Non-toxic, non-corrosive, odorless, non drying, insolublilization, low consistency.

Gray paste

Fully transparent and trace-free, epoxy resin is resistant to most chemicals and solvents and is resistant to temperatures from -40 to 120 °C.

Iron bottle packaging

packaging specifications: 1.0kg /can.

Use instructions

Clean the surface, remove the greasy dirt, then extrude thermal conductive silicon grease directly.
The uniform coating should be applied to the surface. The coating can be brushed, scraped or rolled as needed.
If the user uses silicone oil to dilute, not only occur oil separation easily, but also make the thermal conductivity smaller. Therefore, we suggest customers choose their ideal models to ensure the using quality.

Caution

The coating surface should be uniform, coating more isn’t mean the better, but in the premise of filling the surface gap, coating a thin layer is enough.

Packaging and preservation

Packing specification: 1.0kg/ can, negotiable to according to the user's needs.

Storage: store in a cool and dry place for one year.

Note: The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you.

Company Features
1. Since the establishment, Huizhou SANDAO New Material Co., Ltd has been engaged in the production of gas resistant rtv. We have quickly expanded our operations globally.
2. The high yield of Thermal conductive material TDS proves that Huizhou SANDAO New Material Co., Ltd has solid technical capabilities.
3. Our vision is to develop the Thermal conductive material TDS technology, and improve the Thermal conductive material TDS design. Check it! SANDAO New Material provides ONE-STOP PURCHASE to create great convenience for you. Check it! With the prosperity of Thermal conductive material TDS industry, SANDAO brand will develop rapidly for its considerate service. Check it! We will try to enter into the global market to be a famous Thermal conductive material TDS manufacture brand. Check it!

Favorable rate

100%

Buyer impression