Company Advantages1. SANDAO gas resistant rtv is made by adopting the world's newest production technology. Its viscosity differs depending on the material, performance and production process
2. Huizhou SANDAO New Material Co., Ltd has an advantage comparing with other Thermal conductive material TDS companies in terms of finance, quality and fame. Water absorption and coefficient of linear expansion of this product are small
3. Thermal conductive material TDS can be relatively gas resistant rtv, and provide features like gas resistant rtv.
4. As might be expected, Thermal conductive material TDS have the characteristics of gas resistant rtv. It is a very strong impregnation product
High temperature resistant heat conductive silicone grease SD920
High temperature resistant heat conductive silicone grease SD920 is single component which is made from imported silicone as the main body, filling materials, thermal conductive materials and other polymer materials. It’s compound of organosiloxane and metal oxides which with good thermal conductivity and insulation. This grease has excellent thermal conductivity, no curing, no powdering, high temperature resistance, low adhesion pressure, oxidation resistance, no air drying, no hardening or melting, low thermal resistance, good electrical insulation, Wide operating temperature (-50 ℃ ~ 200 ℃), good stability, low consistency and good operation performance. The silicone grease is non-toxic, non-corrosive, tasteless, never curing and insoluble.
Sandao thermal conductive silicone grease is widely used to fill the gap between power heating element and radiator, especially used for high power LED heat dissipation or coating to derive the heat produced by components. Such as CPU and radiator gap filling, high-power transistor, thyristor element, diode and substrate (aluminum, copper) converter, power module, oven, induction cooker, coffee pot gap filling, TV power amplifier tube and heat sink, Semiconductor refrigeration, etc. Reduce the working temperature of the heating element.
LED heat dissipation gap filling
Performance | Test data |
Appearance | Gray paste |
Penetration degree(1/10mm,25℃) | 280~340 |
Specific gravity(g/cm3) | 2.6-3.0 |
Bleed(%。150℃,8h) | ≤2.0 |
Fugitive constituent(%。150℃,8h) | ≤2.0 |
Break down strength(kv/mm) | ≥2.0 |
Volume resistivity(Ω.cm) | 4×1014 |
Thermal conductivity(w/m·k) | ≥2.0 |
General purpose thermal grease
SD920 general-purpose thermal grease uses imported silicone-based one-component silicone thermal grease.
Green environmental protection
Non-toxic, non-corrosive, odorless, non-drying, insolubilization, low consistency.
Gray paste
Excellent thermal conductivity, non curing, high temperature resistance, low adhesion pressure, low thermal resistance, good electrical insulativity.
Iron bottle packaging
packaging specifications: 1.0kg / can.
Clean the surface, remove the greasy dirt, then extrude thermal conductive silicon grease directly.
The uniform coating should be applied to the surface. The coating can be brushed, scraped or rolled as needed.
If the user uses silicone oil to dilute, not only occur oil separation easily, but also make the thermal conductivity smaller. Therefore, we suggest customers choose their ideal models to ensure the using quality.
Caution
The coating surface should be uniform, coating more isn’t mean the better, but in the premise of filling the surface gap, coating a thin layer is enough.
Packaging and preservation
bg
Packing specification: 1.0kg/ can, negotiable to according to the user's needs.
Storage: store in a cool and dry place for one year.
Note: The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you.
Company Features1. Huizhou SANDAO New Material Co., Ltd is an attractive Chinese manufacturer focusing on gas resistant rtv R & D and production for many years. Huizhou SANDAO New Material Co., Ltd is powerful and strong in R&D capability.
2. Huizhou SANDAO New Material Co., Ltd has deep technical potential and long-lasting pursuit of superior Thermal conductive material TDS products.
3. Huizhou SANDAO New Material Co., Ltd also boasts a first-class team in product research and development with years' experience in Thermal conductive material TDS field. Our company would like to adhere to a set of legal, social, ethical, and environmental standards so as to in response to the environmental problems. For example, we have made a strict plan to reduce pollution during the production process, including water and waste pollution. Ask!