SANDAO is designed by engineering experts with optimum quality materials. In some cases, it can achieve flame retardant, weathering, and thermal conductivity properties2.
The product has good durability, suitable for long-term use and storage. The product has good aging resistance3.
With accumulated production experience for many years, Huizhou SANDAO New Material Co., Ltd becomes reliable for quality of . During its solidification process, the powder components do not delaminate4.
Huizhou SANDAO New Material Co., Ltd has set up a complete distribution and sales network. The product has achieved the requirement of mechanical property completely
High thermal conductivity silicone grease SD930
High thermal conductivity silicone grease SD930 is made by imported raw materials and formula .It’s compound of organosiloxane and metal oxides which with good thermal conductivity,good insulation thin coating thickness. This grease has excellent thermal conductivity, no curing, no powdering, high temperature resistance, low adhesion pressure, oxidation resistance, no air drying, no hardening or melting, low thermal resistance, good electrical insulation, wide operating temperature (-50 ℃ ~ 200 ℃), good stability, low consistency and good operation performance. The silicone grease is non-toxic, non-corrosive, tasteless, never curing and insoluble.
Thermal conductive silicone grease is widely used to fill the gap between power heating element and radiator, especially used for high power LED heat dissipation or coating to derive the heat produced by components. Such as CPU and radiator gap filling, high-power transistor, thyristor element, diode and substrate (aluminum, copper) converter, power module, oven, induction cooker, coffee pot gap filling, TV power amplifier tube and heat sink, Semiconductor refrigeration, etc. Reduce the working temperature of the heating element.
LED heat dissipation gap filling
|Break down strength（kv/mm）||≥2.0|
General purpose thermal grease
SD930 general-purpose thermal grease uses imported silicone-based one-component silicone thermal conductive grease.
Green environmental protection
Non-toxic, non-corrosive, odorless, non drying, insolublilization, low consistency.
Fully transparent and trace-free, epoxy resin is resistant to most chemicals and solvents and is resistant to temperatures from -40 to 120 °C.
Iron bottle packaging
packaging specifications: 1.0kg /can.
Clean the surface, remove the greasy dirt, then extrude thermal conductive silicon grease directly.
The uniform coating should be applied to the surface. The coating can be brushed, scraped or rolled as needed.
If the user uses silicone oil to dilute, not only occur oil separation easily, but also make the thermal conductivity smaller. Therefore, we suggest customers choose their ideal models to ensure the using quality.
The coating surface should be uniform, coating more isn’t mean the better, but in the premise of filling the surface gap, coating a thin layer is enough.
Packaging and preservation
Packing specification: 1.0kg/ can, negotiable to according to the user's needs.
Storage: store in a cool and dry place for one year.
The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you. Company Features1.
Huizhou SANDAO New Material Co., Ltd has grown to be leading company in industry over years of factory experience. 2.
A new process for the production of was studied in Huizhou SANDAO New Material Co., Ltd. 3.
The high quality from SANDAO will never let you down. Get price!