The silicone adhesive is suitable for waterproofing of electronic coatings, LCD modules for potting, solar energy, automobiles, home appliances, electrical appliances, circuit boards, etc.
Ceramic bonding
LCD module
Metal bonding
Plastic bonding
Electronic product bonding
Glass bonding
| Type | SD399 | SD399B | SD399W |
| Color | Colorless transparent semi-fluid | Black semi-fluid | White semi-fluid |
| Density(g/cm3) | 1.0～1.1 | 1.0～1.1 | 1.0～1.1 |
| Tack-free time（25℃,min） | ≤40 | ≤40 | ≤40 |
| Tensile strength（MPa） | ≥1.5 | ≥1.5 | ≥1.5 |
| Elongation（%） | 200～300 | 200～300 | 200～300 |
| Shear strength（MPa） | ≥1.0 | ≥1.0 | ≥1.0 |
| Hardness(shore A) | 20～30 | 20～30 | 20～30 |
| Temperature （℃） | -50～200 | -50～200 | -50～200 |
| Permittivity（@60Hz） | 2.8 | 2.8 | 2.8 |
| Dielectric intesity（kV/mm） | ≥20 | ≥20 | ≥20 |
| Volume Resistance（Ω.cm） | 2.0×1015 | 2.0×1015 | 2.0×1015 |
First, surface of the substrate is cleaned to remove rust, dust and oil.
Second the silicone adhesive sealant has a surface cure time of about 20 minutes and is fully cured after 24 hours.
1. Keep thermal paste out of reach of children.
2. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
Copyright © 2019 Huizhou Sandao New material Co., Ltd. | All Rights Reserved
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.
