SANDAO is designed based on the detailed market research and deep understanding of customer's requirements. It should be fully cured before realizing its use value2.
performs powerful function and has strong advantages. 3.
are equipped for Huizhou SANDAO New Material Co., Ltd in order to perform the procedure with perfect product. Strong weather resistance makes attribute to its long service life4.
Since 's put into market, it has received good comments from customers. Water absorption and coefficient of linear expansion of this product are small
SD909 Flexible Silicone Sealant Series
SD909 Flexible Silicone Sealant Series is a silicone adhesive that can be quickly bonded. It is a black or colorless translucent viscous liquid with excellent insulation, good adhesion, moisture resistance, shock resistance, corona resistance and leakage resistance, excellent in flexibility.
The silicone sealant is used for bonding and positioning of electronic components on an electronic circuit board, and is shockproof, moisture-proof and sealed, and high-temperature adhesive seal of metal plane.
Semiconductor material bonding
|Color||Colorless transparent semi-fluid||Black semi-fluid||White semi-fluid|
|Tensile strength （MPa）||≥0.8||≥0.8||≥0.8|
SD909 flexible silicone sealant series is a silicone adhesive that can be quickly bonded.
Neutral non-corrosive, odorless, Non-pollution, good viscosity and fluidity.
Colorless translucent viscous liquid.
After curing, moistureproof, shock-proof, corona-resistant, anti-leakage,excellent flexibile film , it has excellent resistance to cold and heat exchange (-60~260°C).
Packing specification: 100g /tube, 310ml/cartridge 2.6L / bottle.
The surface of the substrate must be degreased and dried, and corona treatment can improve the bonding effect(thickness not exceeding 6 mm).
The silicone adhesive sealant has a surface cure time of about 20 minutes and is fully cured after 24 hours.
Packaging and preservation
1.When the relative temperature is higher than 30%, the curing will accelerate.
2.Keep thermal paste out of reach of children.
3.Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
Huizhou SANDAO New Material Co., Ltd performs well in the area which is mainly involved. 2.
Huizhou SANDAO New Material Co., Ltd always make use of advanced technology in the production of . 3.
Huizhou SANDAO New Material Co., Ltd adheres to the service philosophy of . Call!