Home  > PRODUCT  > Silicone adhesive series  > One-component RTV silicone rubber TDS  >  Solar module sealant SD9099
Solar module sealant SD9099

Solar module sealant SD9099

Model number
SD9099
MOQ
1pcs
Color
white paste
Package
100ml/pcs, 310ml/pcs
Main characteristic
does not corrode metals and plastics
Main application
solar cell module etc.
Lead time
within a week after payment

our product

bg


SD9099 Solar module Sealant
SD9099 Solar module Sealant is a one component room temperature curing silicone adhesive that does not corrode metals and plastics.

Application

bg


The solar component sealant is used for sealing the solar cell module frame, bonding the solar cell module junction box, and sealing the solar lamp. The solar sealant has excellent UV resistance, yellowing resistance, excellent weathering resistance, rain, anti-fouling and hail impact resistance, and good adhesion to aluminum, glass, junction box plastic and other materials.

Plastic junction box bonding

Seal of solar cell frame

Solar light fixture


Glass bonding

Bonding of solar cell junction box

Aluminum bonding



product Performance

bg


TypeSD9099
ColorWhite paste
Density(g/cm3)1.35~1.40
Surface dry(25℃,min)≤12
Tensile strength (MPa)≥2.0
Elongation(%)200~300
Shear strength(MPa)≥2.0
Hardness(shore A)50~55
Temperature range(℃)-50~250
Permittivity(@60Hz)2.8
Dielectric intesity(kV/mm)≥18
Volume Resistance(Ω.cm)1×1015
FlammableUL 94-V0

Product details

bg
SD9099 solar component sealant
SD9099 solar component sealant is a one component room temperature curing silicone adhesive.
White paste
Excellent UV resistance, yellowing resistance, excellent weathering resistance.
Green environmental protection
It is harmless to the human body, SGS environmental protection certification, and the flame retardant performance reaches UL 94 V-0.
Long storage period
Stored in a cool dry place with a shelf life of one year, packaging size 310ML / PCS

Use instructions

bg


  • The surface of the substrate must be degreased and dried, and corona treatment can improve the bonding effect. The silicone adhesive sealant has a surface cure time of about 20 minutes and is fully cured after 24 hours.

Notes:

  • 1.   Keep thermal paste out of reach of children.

  • 2.   Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.

Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...