SANDAO  >  AI - Page Sitemap  >  SD958 MS building all-purpose glue
SD958 MS building all-purpose glue

SD958 MS building all-purpose glue

Model number
SD958
MOQ
1pcs
Color
yellow
Package
330ml/set
Main characteristic
high-strength elastic bonding, seal repair,water and temperature resistance, instant positioning.
Main application
concrete walls,wood panels,ceramic products,metals,stone and so on.
Lead time
within a week after payment
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. The raw materials of SANDAO ms polymer adhesive undergo a strict selection and screening process. It is an indispensable important insulating material for the electronics industry
2. It adapts to a variety of different scenarios. Strong weather resistance makes attribute to its long service life
3. This product is known for its excellent performance and long service life. During its solidification process, the powder components do not delaminate
4. This product has good performance and long service life. The product features good extrusion properties
5. In order to meet its set industry standards, the product is subject to strict quality control throughout the production process.

our product

bg


SD958 MS building all-purpose glue-1

Building adhesives-SD958 super type

MS adhesive, also known as "modified silane polyether adhesive", is based on MS Polymer polymer, the raw material system contains no solvent, zero formaldehyde, zero toluene, no isocyanate and other toxic raw materials. The release of VOC (volatile organic compounds) is almost zero, so it is known as "the greenest new generation sealant".

SD958 super adhesive is a kind of all-purpose adhesive, which is widely used in the field of architectural decoration because of its high bond strength, high initial adhesion and fast grab.





Application

bg



Multifunctional adhesives can be used for bonding, sealing and repairing cracks.

High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.  


SD958 MS building all-purpose glue-2

Corner bonding

SD958 MS building all-purpose glue-3

Electronic Components

SD958 MS building all-purpose glue-4

Marble bonding


SD958 MS building all-purpose glue-5

Metal bonding

SD958 MS building all-purpose glue-6

Tile bonding

SD958 MS building all-purpose glue-7

window gap bonding



product Performance

bg


TypeSD958
Coloryellow

Viscosity (pa.s) 10rpm

900

Initial curing time(mins)

30

100% modulus (Mpa)1.2
Elongation at break(N/mm)230
Tensile strength(MPa)1.5

Product details

bg
SD958 MS building all-purpose glue-8
Building adhesives-SD958 super type
SD958 super adhesive is a kind of all-purpose adhesive.
SD958 MS building all-purpose glue-9
Light yellow

Which is widely used in the field of architectural decoration because of its high bond strength, high initial adhesion and fast grab.

 


SD958 MS building all-purpose glue-10
Environmental protection
No solvent, environmental protection, odorlessness, instant positioning.
SD958 MS building all-purpose glue-11
Storage
Store in a cool and dry place under normal temperature, storage period is 12 months.

Use instructions

bg


The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .

Notes:

  • 1. Not suitable for: adhesion of smooth surface substrates.

  • 2. Maximum endurance curing time: 24 hours.

  • 3. Construction environment temperature: 5 ℃ ~ 40 ℃.

  • 4. The operating temperature shall not be lower than-20 ℃  or above 65 ℃.

  • 5. Store in a cool and dry place under normal temperature, storage period is 12 months.



Company Features
1. Huizhou SANDAO New Material Co., Ltd has been engaged in the manufacture of MS adhesive series for a long time.
2. Our Research & Development department plays a central role in achieving our business objectives. Their high level of expertise and experience are put to good use in shaping the development process.
3. ms polymer adhesive is regarded as the Huizhou SANDAO New Material Co., Ltd's service tenet. Inquire!
There are many factors being considered while designing SANDAO MS adhesive series. They are the selection of materials, modes of loading, safety factors, allowable stresses, etc. It has been exported to 100+ countries including the Netherlands, Korea, and Thailand
The design of SANDAO MS adhesive series is the application of some basic knowledge. They are Mathematics, Engineering Mechanics, Strength of Materials, Finite Element Analysis, etc. It is manufactured in line with JECFA, EU, FCC, and BP certifications
SANDAO MS adhesive series is created in an avant-garde way. Its design performs various manufacturing technologies such as plastic injection, machining, sheet metal and die castings. It helps maintain product quality and freshness
SANDAO MS adhesive series is carefully crafted. Factors such as the dimensions of the assembly and the machine elements, materials, and method of production are clearly specified before its manufacture. It can help foods maintain their crisp quality and strength
SANDAO MS adhesive series must go through these following production stages, including metal materials procurement and preparation, components machining, surface polishing, and assembly. It has been proven safe to be used in foods
Each product is rigorously tested before delivery. It ensures that familiar foods have consistent qualities
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...