Healthy antimicrobial and anti-mildew adhesive SD858
In daily life, black mold breeding phenomenon everywhere, not only caused the pollution of the living environment, but also long-term harm to people's physical and mental health;
Sandao Healthy antimicrobial and anti-mildew adhesive D858 is a professional anti-mildew antibacterial sealant, compared with the ordinary anti-mildew gel on the market, D858’s polymer structure can more effectively inhibit the breeding of mold, the protection time is longer.
There is no formaldehyde, no toluene, no solvent, no isocyanate, no toxic and tasteless, the content of volatile organic compounds （VOC）is almost 0, the product itself is healthy and environmental protection, the mildew prevention performance is longer, more outstanding.
Multifunctional adhesives can be used for bonding, sealing and repairing cracks.
High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.
Bathroom
Bathroom
Cold storage
hospital
kitchen
window gap bonding
| Type | SD858 |
| Color | yellow |
Viscosity (pa.s) 10rpm | 900 |
Initial curing time（mins） | 30 |
| 100% modulus (Mpa) | 1.2 |
| Elongation at break（N/mm） | 230 |
| Tensile strength（MPa） | 1.5 |
The polymer network structure firmly locks the antibacterial property, inhibits the growth of mold, and has a longer aging time.
The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .
1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.
Copyright © 2019 Huizhou Sandao New material Co., Ltd. | All Rights Reserved
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.
