SANDAO  >  AI - Page Sitemap  >  SANDAO twocomponent Two-component addition-type potting adhesive TDS widely-use for rubber parts
SANDAO twocomponent Two-component addition-type potting adhesive TDS widely-use for rubber parts

SANDAO twocomponent Two-component addition-type potting adhesive TDS widely-use for rubber parts

Model number
SD6341
MOQ
1pcs
Color
White/black liquid
Package
1.25kg/ set
Main characteristic
Two-component Ratio is 4:1, no need of vacuum defoaming
Main application
silicon steel materials, roller core materials, coil windings,etc.
Lead time
within a week after payment
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Enterprise Strength
  • SANDAO New Material has always provided customers with the best service solutions and has won high praise from customers.
Company Advantages
1. SANDAO Two-component addition-type potting adhesive TDS is treated with professional dying technique. The coloring agent is evenly distributed to the materials by the means of mechanical heating method.
2. The product has remarkable sealing performance. All its components and parts are finely soldered inside the housing.
3. This product has been widely used in various fields.

our product

bg


SANDAO twocomponent Two-component addition-type potting adhesive TDS widely-use for rubber parts-1
Epoxy resin potting sealant SD6341
Epoxy resin potting sealant SD6341 is a two-component electronic material used for general electronic component sealing and circuit board sealing. It can be cured at room temperature or heated, and the cost is lower. Temperature during curing is low and the highest exothermic temperature is less than 50 ℃. Good surface gloss, low shrinkage, excellent moisture resistance and insulation after curing.

Application

bg


Epoxy resin pouring sealant is widely used in silicon steel materials, roller core materials, coil windings, capacitor bushing and other important radiating and high temperature resistance electronic appliances, such as transformers, motors, radiators, sensors, electromagnets, PCB plates, solenoid valves, air conditioners, power module, electromagnetic clutch, automobile parts, etc.

SANDAO twocomponent Two-component addition-type potting adhesive TDS widely-use for rubber parts-2

air conditioning

SANDAO twocomponent Two-component addition-type potting adhesive TDS widely-use for rubber parts-3

heat sink

SANDAO twocomponent Two-component addition-type potting adhesive TDS widely-use for rubber parts-4

Induction cooker bonding


SANDAO twocomponent Two-component addition-type potting adhesive TDS widely-use for rubber parts-5

PCB board bonding

SANDAO twocomponent Two-component addition-type potting adhesive TDS widely-use for rubber parts-6

Power module

SANDAO twocomponent Two-component addition-type potting adhesive TDS widely-use for rubber parts-7

Motor bonding



product Performance

bg


Characteristics
  • ◪  Two-component 4:1 ratio, 100% solidification, no solvent, no pollution, no toxicity.

  • ◪  Good weather resistance, water resistance, oil resistance, acid resistance, high temperature resistance, insulation, flame retardant, cracking resistance and so on.

  • ◪  Can be cured at room temperature and heating, high bonding strength. Stable performance, good toughness and filling after curing, excellent physical, mechanical and insulation properties.

  •   It has low viscosity after mixing, no need of vacuum defoaming at room temperature, and long operating time, so it’s a kind of ideal pouring glue.

  •   For some larger parts of the pouring and sealing, can be one-time molding, more operational advantages.

  •   Achieve actually measured high thermal conductivity: 0.8w/m.k

General performance
ItemConditionPart APart BMix liquid
AppearanceVisualWhite/black Viscous liquidTransparent / brown liquidWhite/black liquid
Density25℃,g/cm31.64~1.651.11~1.131.59~1.61
Viscosity25℃, mpa.s12000~1300040~120800~1000

Usage: 1.Mixing: mix part A and part B at 4:1 ratio by weight, potting after stir well. The operating time after mixing is 60 minutes at 25 ℃.
2.Solidification: at 25 ℃, it will harden at 6 for 8 hours, and at 80 ℃ for 1 hour. It can be assembled after hardening. Tests typically take place after 24 hours of curing.

Notes:This data is measured by the technicians in the laboratory, which has certain reference value for the users. However, because the usage methods and conditions of each user are different, it is suggested that the users should find out the best technology and method according to their own conditions.


Feature after curing
Itemcondition/unitTest result
HardnessShore-D>80
Volume resistivity25℃,Ω.cm2.8*1015
Breakdown voltage25℃,kv/mm>30
Dielectric constant25℃,1MHZ3.1±0.1
Dielectric loss tangent25℃,1MHZ<0.01
Shear temperature rangeMpa>10
Operating temperature range-40~150
Curing shrinkage%<0.5

Attention: 1, This kind of products are not dangerous goods, according to the general chemical storage and transportation, the storage period is 1 year.
2, A component should be stirred properly before use (as there will be precipitation after long period of time, it does not affect the performance after stir well,); after accurate weighing of component A and component B, please stir well and then use it.
3, The mixing amount of glue should not be too large, otherwise, the operating time will be shortened which lead to waste if cannot use out timely.

Notes:The above performance data are typical data of the product at humidity 70 ℃, temperature 25 ℃,for customer's reference only. Customers are kindly requested to use the measured data.

Product details

bg
SANDAO twocomponent Two-component addition-type potting adhesive TDS widely-use for rubber parts-8
Epoxy resin potting and sealing adhesive
SD6341 epoxy potting compound is a two-component electronic material used for Potting of general electronic components And circuit board sealing.
SANDAO twocomponent Two-component addition-type potting adhesive TDS widely-use for rubber parts-9
White/black viscous liquid
It can be cured at room temperature, and can be Cured by heating. After curing, the surface gloss Is good, the shrinkage rate is low, and the Moisture resistance and insulation Performance are excellent.
SANDAO twocomponent Two-component addition-type potting adhesive TDS widely-use for rubber parts-10
Green environmental protection
Non-toxic, non-corrosive, free of harmful Substances.
SANDAO twocomponent Two-component addition-type potting adhesive TDS widely-use for rubber parts-11
Plastic bottle packaging
packaging specifications: 1.25kg/ set.

Company Features
1. Huizhou SANDAO New Material Co., Ltd precedes to provide top-ranking Two-component addition-type potting adhesive TDS in the marketplace.
2. SANDAO has its own technology center to manufacture Two-component addition-type potting adhesive TDS.
3. We embrace challenges, take risks, and don’t settle for achievements. Instead, we strive for more! We strive to progress in communication, management, and business. We cultivate differences by being original. Check it! Regardless of ge rtv silicone 's quality or service, we always pursue excellence. We are fully committed to operating our business in a sustainable manner. We carefully monitor our impact on the environment and have procedures in place to reduce the unnecessary use of natural resources. Our mission is to deliver consistent customer delight through intense vetting of customers projects, outstanding engagement execution, and project management.
We carry out process evaluation on SANDAOTwo-component addition-type potting adhesive TDS to ensure that sewing, structure, and decoration meet international bedding standards.
SANDAO ge rtv silicone has good quality. The basic parameters of the product, including fabric structure, softness and shrinkage, should be strictly checked before cutting. This product is able to achieve a high output rate
SANDAO ge rtv silicone needs to be tested in various aspects. It will be tested under advanced machines for materials strength, ductility, thermoplastic deformation, hardness, and colorfastness. Thanks to its high working efficiency, this product significantly reduces manpower costs
The production of SANDAO ge rtv silicone is rigorous. In addition to the materials that provide the look and feel of the building, high technical requirements are required. Featuring low electricity consumption, this product significantly helps save energy
SANDAO ge rtv silicone has undergone rigorous testing. This test was conducted by our QC team who performed tensile testing, fatigue testing and color fastness testing. This product is highly portable thanks to its compact design
This product meets the stringent quality standards of the global market. It will stop running when it is overloaded
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...