SANDAO  >  AI - Page Sitemap  >  SANDAO twocomponent Two-component addition-type potting adhesive TDS  supply for electroplating
SANDAO twocomponent Two-component addition-type potting adhesive TDS  supply for electroplating

SANDAO twocomponent Two-component addition-type potting adhesive TDS  supply for electroplating

Model number
SD6341
MOQ
1pcs
Color
White/black liquid
Package
1.25kg/ set
Main characteristic
Two-component Ratio is 4:1, no need of vacuum defoaming
Main application
silicon steel materials, roller core materials, coil windings,etc.
Lead time
within a week after payment
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
SANDAO New Material insists on the use of high-quality materials and advanced technology to manufacture ms adhesive. Besides, we strictly monitor and control the quality and cost in each production process. All this guarantees the product to have high quality and favorable price. ms adhesive is more competitive than other products in the same category, as shown in the following aspects.
  • v s
Enterprise Strength
  • SANDAO New Material has professional personnel to provide consulting services in terms of product, market and logistics information.
Company Advantages
1. SANDAO ge rtv silicone is crafted using high quality materials we source from certified vendors of the market.
2. This product features the required safety. Its materials used have been strictly checked for needles and any other metal objects that could cause potential hazards.
3. This product is effective in resisting humidity. It will be not easily affected by the moisture that could lead to the loosening and weakening of joints or even failure.
4. As an artistic language reflecting the designer's conception, this product presents an unusual aesthetic feeling in the shape and the color.
5. The product plays an indispensable role in modern life or work. It would become an essential part of people's life or work by improving overall efficiency.

our product

bg


SANDAO twocomponent Two-component addition-type potting adhesive TDS  supply for electroplating-1
Epoxy resin potting sealant SD6341
Epoxy resin potting sealant SD6341 is a two-component electronic material used for general electronic component sealing and circuit board sealing. It can be cured at room temperature or heated, and the cost is lower. Temperature during curing is low and the highest exothermic temperature is less than 50 ℃. Good surface gloss, low shrinkage, excellent moisture resistance and insulation after curing.

Application

bg


Epoxy resin pouring sealant is widely used in silicon steel materials, roller core materials, coil windings, capacitor bushing and other important radiating and high temperature resistance electronic appliances, such as transformers, motors, radiators, sensors, electromagnets, PCB plates, solenoid valves, air conditioners, power module, electromagnetic clutch, automobile parts, etc.

SANDAO twocomponent Two-component addition-type potting adhesive TDS  supply for electroplating-2

air conditioning

SANDAO twocomponent Two-component addition-type potting adhesive TDS  supply for electroplating-3

heat sink

SANDAO twocomponent Two-component addition-type potting adhesive TDS  supply for electroplating-4

Induction cooker bonding


SANDAO twocomponent Two-component addition-type potting adhesive TDS  supply for electroplating-5

PCB board bonding

SANDAO twocomponent Two-component addition-type potting adhesive TDS  supply for electroplating-6

Power module

SANDAO twocomponent Two-component addition-type potting adhesive TDS  supply for electroplating-7

Motor bonding



product Performance

bg


Characteristics
  • ◪  Two-component 4:1 ratio, 100% solidification, no solvent, no pollution, no toxicity.

  • ◪  Good weather resistance, water resistance, oil resistance, acid resistance, high temperature resistance, insulation, flame retardant, cracking resistance and so on.

  • ◪  Can be cured at room temperature and heating, high bonding strength. Stable performance, good toughness and filling after curing, excellent physical, mechanical and insulation properties.

  •   It has low viscosity after mixing, no need of vacuum defoaming at room temperature, and long operating time, so it’s a kind of ideal pouring glue.

  •   For some larger parts of the pouring and sealing, can be one-time molding, more operational advantages.

  •   Achieve actually measured high thermal conductivity: 0.8w/m.k

General performance
ItemConditionPart APart BMix liquid
AppearanceVisualWhite/black Viscous liquidTransparent / brown liquidWhite/black liquid
Density25℃,g/cm31.64~1.651.11~1.131.59~1.61
Viscosity25℃, mpa.s12000~1300040~120800~1000

Usage: 1.Mixing: mix part A and part B at 4:1 ratio by weight, potting after stir well. The operating time after mixing is 60 minutes at 25 ℃.
2.Solidification: at 25 ℃, it will harden at 6 for 8 hours, and at 80 ℃ for 1 hour. It can be assembled after hardening. Tests typically take place after 24 hours of curing.

Notes:This data is measured by the technicians in the laboratory, which has certain reference value for the users. However, because the usage methods and conditions of each user are different, it is suggested that the users should find out the best technology and method according to their own conditions.


Feature after curing
Itemcondition/unitTest result
HardnessShore-D>80
Volume resistivity25℃,Ω.cm2.8*1015
Breakdown voltage25℃,kv/mm>30
Dielectric constant25℃,1MHZ3.1±0.1
Dielectric loss tangent25℃,1MHZ<0.01
Shear temperature rangeMpa>10
Operating temperature range-40~150
Curing shrinkage%<0.5

Attention: 1, This kind of products are not dangerous goods, according to the general chemical storage and transportation, the storage period is 1 year.
2, A component should be stirred properly before use (as there will be precipitation after long period of time, it does not affect the performance after stir well,); after accurate weighing of component A and component B, please stir well and then use it.
3, The mixing amount of glue should not be too large, otherwise, the operating time will be shortened which lead to waste if cannot use out timely.

Notes:The above performance data are typical data of the product at humidity 70 ℃, temperature 25 ℃,for customer's reference only. Customers are kindly requested to use the measured data.

Product details

bg
SANDAO twocomponent Two-component addition-type potting adhesive TDS  supply for electroplating-8
Epoxy resin potting and sealing adhesive
SD6341 epoxy potting compound is a two-component electronic material used for Potting of general electronic components And circuit board sealing.
SANDAO twocomponent Two-component addition-type potting adhesive TDS  supply for electroplating-9
White/black viscous liquid
It can be cured at room temperature, and can be Cured by heating. After curing, the surface gloss Is good, the shrinkage rate is low, and the Moisture resistance and insulation Performance are excellent.
SANDAO twocomponent Two-component addition-type potting adhesive TDS  supply for electroplating-10
Green environmental protection
Non-toxic, non-corrosive, free of harmful Substances.
SANDAO twocomponent Two-component addition-type potting adhesive TDS  supply for electroplating-11
Plastic bottle packaging
packaging specifications: 1.25kg/ set.

Company Features
1. With years of efforts on the design and manufacture of ge rtv silicone, Huizhou SANDAO New Material Co., Ltd has developed into a professional manufacturer in the industry.
2. SANDAO has a strong design and development team.
3. Huizhou SANDAO New Material Co., Ltd deeply believes that customers are the source of long-term development for an enterprise. Inquire online! ge rtv silicone, the New Service Idea of Huizhou SANDAO New Material Co., Ltd. Inquire online! To offer the highest quality Two-component addition-type potting adhesive TDS, our employees have always been working hard under the requirements of the customers. Inquire online! The service concept of Huizhou SANDAO New Material Co., Ltd has always been ge rtv silicone. Inquire online!
SANDAO Two-component addition-type potting adhesive TDS will be inspected comprehensively. The battery cells will be tested in different operation environments, including fault condition, high-pressure condition, or combustion condition to check its safety performance. Xindali Was built since 1997, focus on the button switch industry, is located in the famous low voltage appliance market Liushi in Wenzhou City
The materials of SANDAO ge rtv silicone are decided after careful consideration. The compatibility with chemicals and its combination with other ingredients are also considered to avoid adhesiveness between same-material faces. Products are mainly sold in the European market and have their own brand agents in Italy, Germany, Poland and so on
The manufacture of SANDAO Two-component addition-type potting adhesive TDS involves a wide range of stages. These stages rapid prototypes, PCB fabrication, welding, performance testing, and assembly. Xindali has more than 70 patents now, and there are some other series are under application of International PCT
The design and execution of SANDAO Two-component addition-type potting adhesive TDS will always be determined by the purpose for which it is intended. The range of possible shapes, sizes and designs are practically endless. Most of the products have passed the certification of C E, R o H S, T U V. U L
SANDAO ge rtv silicone has been tested for guaranteed electrical safety. It has passed international tests for electric appliances such as insulation, electric leakage, plug performance, and grounding lead tests. Xindali is a professional manufacturer for push button switch & emergency push button since 1997
The product has passed international quality certification to ensure high quality products. Xindali Was built since 1997, focus on the button switch industry, is located in the famous low voltage appliance market Liushi in Wenzhou City
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...