SANDAO ge rtv silicone is made of materials that have strong durability. 2.
This product has excellent softness. The fabric is chemically treated with chemical softener to absorb the hard material on the surface of the fabric. 3.
Huizhou SANDAO New Material Co., Ltd constantly improve the production process and improve the control of product quality. 4.
It has attracted much attention in the market and has wide development prospects.
Epoxy resin potting sealant SD6341
Epoxy resin potting sealant SD6341 is a two-component electronic material used for general electronic component sealing and circuit board sealing. It can be cured at room temperature or heated, and the cost is lower. Temperature during curing is low and the highest exothermic temperature is less than 50 ℃. Good surface gloss, low shrinkage, excellent moisture resistance and insulation after curing.
Epoxy resin pouring sealant is widely used in silicon steel materials, roller core materials, coil windings, capacitor bushing and other important radiating and high temperature resistance electronic appliances, such as transformers, motors, radiators, sensors, electromagnets, PCB plates, solenoid valves, air conditioners, power module, electromagnetic clutch, automobile parts, etc.
◪ Two-component 4:1 ratio, 100% solidification, no solvent, no pollution, no toxicity.
◪ Good weather resistance, water resistance, oil resistance, acid resistance, high temperature resistance, insulation, flame retardant, cracking resistance and so on.
◪ Can be cured at room temperature and heating, high bonding strength. Stable performance, good toughness and filling after curing, excellent physical, mechanical and insulation properties.
◪ It has low viscosity after mixing, no need of vacuum defoaming at room temperature, and long operating time, so it’s a kind of ideal pouring glue.
◪ For some larger parts of the pouring and sealing, can be one-time molding, more operational advantages.
◪ Achieve actually measured high thermal conductivity: 0.8w/m.k
|Item||Condition||Part A||Part B||Mix liquid|
|Appearance||Visual||White/black Viscous liquid||Transparent / brown liquid||White/black liquid|
Usage: 1.Mixing: mix part A and part B at 4:1 ratio by weight, potting after stir well. The operating time after mixing is 60 minutes at 25 ℃.
2.Solidification: at 25 ℃, it will harden at 6 for 8 hours, and at 80 ℃ for 1 hour. It can be assembled after hardening. Tests typically take place after 24 hours of curing.
Notes:This data is measured by the technicians in the laboratory, which has certain reference value for the users. However, because the usage methods and conditions of each user are different, it is suggested that the users should find out the best technology and method according to their own conditions.
|Feature after curing|
|Dielectric loss tangent||25℃，1MHZ||<0.01|
|Shear temperature range||Mpa||>10|
|Operating temperature range||℃||-40~150|
Attention: 1, This kind of products are not dangerous goods, according to the general chemical storage and transportation, the storage period is 1 year.
2, A component should be stirred properly before use (as there will be precipitation after long period of time, it does not affect the performance after stir well,); after accurate weighing of component A and component B, please stir well and then use it.
3, The mixing amount of glue should not be too large, otherwise, the operating time will be shortened which lead to waste if cannot use out timely.
Notes:The above performance data are typical data of the product at humidity 70 ℃, temperature 25 ℃,for customer's reference only. Customers are kindly requested to use the measured data.
Epoxy resin potting and sealing adhesive
SD6341 epoxy potting compound is a two-component electronic material used for Potting of general electronic components And circuit board sealing.
White/black viscous liquid
It can be cured at room temperature, and can be Cured by heating. After curing, the surface gloss Is good, the shrinkage rate is low, and the Moisture resistance and insulation Performance are excellent.
Green environmental protection
Non-toxic, non-corrosive, free of harmful Substances.
Plastic bottle packaging
packaging specifications: 1.25kg/ set.
SANDAO New Material is a Two-component addition-type potting adhesive TDS brand which specializes in research and innovation with a concept of 'being responsible for Two-component addition-type potting adhesive TDS'. 2.
Our professional employees make strict checks at all levels to strive for excellence to produce a perfect Two-component addition-type potting adhesive TDS. 3.
We adhere to the principles of environmental protection to produce environmentally-friendly products. We will strive to seel 100% environmentally friendly, pollution-free, degradable, or recycled raw materials to manufacture products. Our company understands the global nature of today's manufacturing industry and we are always ready to meet our customers' needs. Our products and services will always be customized to meet these needs. Get more info! We are trying hard to cut carbon footprint during production. We promise to eliminate any practices that will harm society and our environment. Our company has a focus on environmental sustainability. We will make tremendous efforts in the reduction of wastes, carbon emission, or other kinds of contaminants.