transparent Two-component epoxy structure bonding at discount for Semiconductor refrigeration

our product

Sandao epoxy resin AB adhesive SD805

Sandao epoxy resin AB adhesive SD805 is a two-component high-temperature resistant adhesive based on epoxy resin. It has the advantages of fast drying, high strength, weak acid and alkali resistance, impact resistance, low smell, resistance to most chemical media, extreme temperature and excellent electrical insulation. Mainly suitable for high temperature resistant metal, ceramic, etc.

Feature

◪ Fast curing, high viscosity, high strength, impact resistance, high insulation, transparent, low smell, no corrosion.
◪ Epoxy resin AB sealant can resist most chemicals and solvents.
◪ Temperature-resistant -40-120 ℃.

Application

Sandao fast drying Epoxy resin AB sealant are used for bonding of metal, ceramic, glass, electroplating / paint / magnetic materials, such as aircraft motor, automobile, machinery, ship, electronics, electrical apparatus, instrument, building, furniture, toys,. high temperature resistant parts such as railway vehicles ,etc, AB glue can also be used to adhesive water tank, oil road, carburetor, cylinder cover, exhaust pipe, bushing of driving shaft, plastic parts such as baffle, vehicles lamp glass, car handle, etc.

SANDAO transparent Two-component epoxy structure bonding at discount for Semiconductor refrigeration-2

Glass bonding

SANDAO transparent Two-component epoxy structure bonding at discount for Semiconductor refrigeration-3

Electroplating paint bonding

SANDAO transparent Two-component epoxy structure bonding at discount for Semiconductor refrigeration-4

Ceramic bonding

SANDAO transparent Two-component epoxy structure bonding at discount for Semiconductor refrigeration-5

Motor component bonding

SANDAO transparent Two-component epoxy structure bonding at discount for Semiconductor refrigeration-6

Mechanical component bonding

SANDAO transparent Two-component epoxy structure bonding at discount for Semiconductor refrigeration-7

Furniture bonding

product Performance

Epoxy resin AB glue		SD805 part A	SD805 part B
Appearance /color		transparent	transparent
Viscosity (mPa.s 25℃)		8000-15000	11000-18000
Specific gravity (g/ml 25℃)		1.0-1.05	1.0-1.05
Ratio（weight ratio pbw）		1	1
Gel time under normal temperature（25℃）20g		5mins
Curing condition	/	/
Temperature range（℃）		-40℃-120℃
Hardness（Shore-D）		73/80
Epoxide equivalent（g/eq）		185/190		/
Active hydrogen equivalent g/eq		/		185/195
Distortion temperature HDT		80℃
Volume resistivity（Ω.cm）25℃		5.0×1016
Surface resistivity（Ω.cm）25℃		7.5×1012
Shear strength of different materials（Mpa）
Aluminum / copper		15-18
Steel		16/19
ABS		6-7

Product details

SANDAO transparent Two-component epoxy structure bonding at discount for Semiconductor refrigeration-8

Quick-drying transparent epoxy resin AB glue

SD805 epoxy resin AB adhesive is a two-component high temperature adhesive based on epoxy resin, which is suitable for high temperature ceramic metal bonding.

SANDAO transparent Two-component epoxy structure bonding at discount for Semiconductor refrigeration-9

Transparent liquid

Fully transparent and trace-free, epoxy resin is resistant to most chemicals and solvents and is resistant to temperatures from -40 to 120 °C.

SANDAO transparent Two-component epoxy structure bonding at discount for Semiconductor refrigeration-10

Green environmental protection

odorless, non-corrosion, non-pollution, fast curing, high viscosity, high strength, impact resistance, extreme temperature and excellent electrical insulativity properties.

SANDAO transparent Two-component epoxy structure bonding at discount for Semiconductor refrigeration-11

AB mixing tube

packaging specifications:64g / tube.

Use instructions

Put on AB glue gun and put on the thread mixing head. The thickness of adhesive layer should be 0.05mm, the coated object should be clamped immediately, and the maximum bonding strength will be guaranteed by uniform contact pressure.
To obtain the highest mechanical strength, the surface of the material can be polished or sandblasted, and then the dust and oil stains on the surface can be scrubbed with a special solvent.
Adhesive should be put on both sides of the object and fix the splice in avoid of dislocation.
Do not mix the lid of A and B to prevent contamination of the adhesive.

Caution

1. AB adhesive is slightly irritating, please wear gas mask and anticorrosion gloves when operating.
2. Cover at any time after each extraction, lest moisture absorption affect curing and performance.
3. Mass use of this product needs to be in a well-ventilated place.

Packaging and preservation

Epoxy resin AB adhesive is packed with AB mixed pipe, 64g/ pcs, transported as non-dangerous goods, should be stored in a dry, shady place (below 5 ℃ ~ 26 ℃), the shelf life is within 12 months from the date of manufacture.

Company Features
1. After years of growth, SANDAO has grown into a major company in the market.
2. Manufactured by our progressive technology, Two-component epoxy structure bonding is of exquisite performance.
3. SANDAO highly values the importance of customer satisfication. Please contact. SANDAO hopes to satisfy every customer with our superior epoxy adhesive . Please contact. That SANDAO develops enterprise culture will help the growth of the company. Please contact.

t******t

The quality of SANDAO two part adhesive is guaranteed. It is sent to the designated testing acceptance center for phone accessories to check its overall quality. Made of non-toxic materials, it will not cause skin allergies such as redness, swelling, and blisters

c******x

The design of SANDAO epoxy adhesive is professionally completed. Many design factors have been taken into considerations, such as acoustic quality, insulation, and fire protection. The product has the utmost weatherability and chemical resistance

h******f

SANDAO two part adhesive is manufactured adopting many high techs. Energy-keeping technology, electromagnetic regulation technology, and good insulation technology. All of its edges have been rounded to guarantee no injury to the skin

g******g

SANDAO epoxy adhesive is produced in a scientific way. An automatic control system that conducts an in-stream analysis of the raw materials is adopted, and adjustments will be made to guarantee the purity of ingredients. Made of 925 sterling silver, it's not likely to become blacken even used for a long time

b******z

SANDAO epoxy adhesive is designed with a smart and compact structure which guarantees the mass flow, stable hydraulic pressure, and straight-flow immediate processing. The product is not susceptible to scratches

d******l

In its production, we place the highest value on reliability and quality. This product is custom-made according to color, shape, and design

Product Message

*Name

Phone

*E-mail

*Content

SANDAO transparent Two-component epoxy structure bonding at discount for Semiconductor refrigeration