thermal Thermal conductive material TDS bulk production for oven

our product

General type heat conductive silicone grease SD910

General type heat conductive silicone greaseSD910 is single component which is made from imported silicone as the main body, filling materials, thermal conductive materials and other polymer materials. It’s compound of organosiloxane and metal oxides which with good thermal conductivity and insulation. This grease has excellent thermal conductivity, no curing, no powdering, high temperature resistance, low adhesion pressure, oxidation resistance, no air drying, no hardening or melting, low thermal resistance, good electrical insulation, Wide operating temperature (-50 ℃ ~ 200 ℃), good stability, low consistency and good operation performance. The silicone grease is non-toxic, non-corrosive, tasteless, never curing and insoluble.

Application

Sandao thermal conductive silicone grease is widely used to fill the gap between power heating element and radiator, especially used for high power LED heat dissipation or coating to derive the heat produced by components. Such as CPU and radiator gap filling, high-power transistor, thyristor element, diode and substrate (aluminum, copper) converter, power module, oven, induction cooker, coffee pot gap filling, TV power amplifier tube and heat sink, Semiconductor refrigeration, etc. Reduce the working temperature of the heating element.

SANDAO thermal Thermal conductive material TDS bulk production for oven-2

High power triode

SANDAO thermal Thermal conductive material TDS bulk production for oven-3

LED heat dissipation gap filling

SANDAO thermal Thermal conductive material TDS bulk production for oven-4

Oven gap filling

SANDAO thermal Thermal conductive material TDS bulk production for oven-5

Power module

SANDAO thermal Thermal conductive material TDS bulk production for oven-6

Thyristor component

SANDAO thermal Thermal conductive material TDS bulk production for oven-7

CPU gap filling

product Performance

Performance	Test data
Appearance	Gray paste
Penetration degree（1/10mm，25℃）	270～340
Specific gravity（g/cm3）	2.6-3.0
Bleed（%。150℃，8h）	≤3.0
Fugitive constituent（%。150℃，8h）	≤2.0
Break down strength（kv/mm）	≥5.0
Volume resistivity（Ω.cm）	4×10¹⁴
Thermal conductivity（w/m·k）	≥1.0

Product details

SANDAO thermal Thermal conductive material TDS bulk production for oven-8

General purpose thermal grease

SD910 Universal Thermal Grease is a one-component silicone thermal grease Based on imported silicone.

SANDAO thermal Thermal conductive material TDS bulk production for oven-9

Gray paste

Non- toxic, non- corrosive, tasteless, non - drying, non - soluble, no air - drying hardening or melting.

SANDAO thermal Thermal conductive material TDS bulk production for oven-10

Green environmental protection

High temperature resistance, low adhesion pressure, low thermal resistance, good electrical insulation, good service stability.

SANDAO thermal Thermal conductive material TDS bulk production for oven-11

Iron bottle packaging

packaging specifications: 1.0kg /can

Use instructions

Clean the surface, remove the greasy dirt, then extrude thermal conductive silicon grease directly.
The uniform coating should be applied to the surface. The coating can be brushed, scraped or rolled as needed.
If the user uses silicone oil to dilute, not only occur oil separation easily, but also make the thermal conductivity smaller. Therefore, we suggest customers choose their ideal models to ensure the using quality.

Caution

The coating surface should be uniform, coating more isn’t mean the better, but in the premise of filling the surface gap, coating a thin layer is enough.

Packaging and preservation

Packing specification: 1.0kg/ can, negotiable to according to the user's needs.

Storage: store in a cool and dry place for one year.

Note: The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you.

Company Features
1. Fully engaged in the developing and manufacturing of Thermal conductive material TDS for years, Huizhou SANDAO New Material Co., Ltd has been a significant market player.
2. Huizhou SANDAO New Material Co., Ltd has a full set of facilities for the production and inspection of products.
3. A key service principle of Huizhou SANDAO New Material Co., Ltd is gas resistant rtv. Inquire online! Huizhou SANDAO New Material Co., Ltd adheres to the theme of scientific development and leads with the core concept of Thermal conductive material TDS. Inquire online!

p******q

The quality control of SANDAO Thermal conductive material TDS strictly complies with the regulations of ceramic tableware industry, including the raw materials and the workmanship of glaze decoration. Its wheel is antimicrobial with specified material, suppressing the growth of disease-causing microbes

y******u

SANDAO gas resistant rtv is rigorously checked for fatigue resistance of shoe heels, attachment strengths of decorative, peel strength of footwear sole bonds, and slip resistance. It is able to withstand a big amount of side thrust

j******o

SANDAO gas resistant rtv has to be inspected to ensure that it has enough physical strength which enables it to withstand wear and shock force. Its wheel will not become crack after long-term use

x******z

The manufacturing of SANDAO gas resistant rtv is carried out through the following processes: metal materials preparation, turning, milling, boring, welding, marking, and assembling. With smooth rolling, it protects both the equipment and the cargo on the equipment

c******k

Before the SANDAO gas resistant rtv is stored or shipped, the finishing operations and inspection remain to be performed following curing. The finishing operation trims flash or excess rubber. Its wheel will not become crack after long-term use

a******f

It has good strength. Its materials have the required toughness to resist deformation under stress and resist fracture due to high impact load. It absorbs the impact of uneven floors, providing smooth rolling

Product Message

*Name

Phone

*E-mail

*Content

SANDAO thermal Thermal conductive material TDS bulk production for oven