Thermal conductive material TDS thermal vendor for heat sink

our product

SANDAO Thermal conductive material TDS vendor for heat sink-1

High temperature resistant heat conductive silicone grease SD920

High temperature resistant heat conductive silicone grease SD920 is single component which is made from imported silicone as the main body, filling materials, thermal conductive materials and other polymer materials. It’s compound of organosiloxane and metal oxides which with good thermal conductivity and insulation. This grease has excellent thermal conductivity, no curing, no powdering, high temperature resistance, low adhesion pressure, oxidation resistance, no air drying, no hardening or melting, low thermal resistance, good electrical insulation, Wide operating temperature (-50 ℃ ~ 200 ℃), good stability, low consistency and good operation performance. The silicone grease is non-toxic, non-corrosive, tasteless, never curing and insoluble.

Application

Sandao thermal conductive silicone grease is widely used to fill the gap between power heating element and radiator, especially used for high power LED heat dissipation or coating to derive the heat produced by components. Such as CPU and radiator gap filling, high-power transistor, thyristor element, diode and substrate (aluminum, copper) converter, power module, oven, induction cooker, coffee pot gap filling, TV power amplifier tube and heat sink, Semiconductor refrigeration, etc. Reduce the working temperature of the heating element.

SANDAO Thermal conductive material TDS vendor for heat sink-2

High power triode

SANDAO Thermal conductive material TDS vendor for heat sink-3

Induction cooker

SANDAO Thermal conductive material TDS vendor for heat sink-4

Oven gap filling

SANDAO Thermal conductive material TDS vendor for heat sink-5

LED heat dissipation gap filling

SANDAO Thermal conductive material TDS vendor for heat sink-6

Power module

SANDAO Thermal conductive material TDS vendor for heat sink-7

CPU gap filling

product Performance

Performance	Test data
Appearance	Gray paste
Penetration degree（1/10mm，25℃）	280～340
Specific gravity（g/cm3）	2.6-3.0
Bleed（%。150℃，8h）	≤2.0
Fugitive constituent（%。150℃，8h）	≤2.0
Break down strength（kv/mm）	≥2.0
Volume resistivity（Ω.cm）	4×10¹⁴
Thermal conductivity（w/m·k）	≥2.0

Product details

SANDAO Thermal conductive material TDS vendor for heat sink-8

General purpose thermal grease

SD920 general-purpose thermal grease uses imported silicone-based one-component silicone thermal grease.

SANDAO Thermal conductive material TDS vendor for heat sink-9

Green environmental protection

Non-toxic, non-corrosive, odorless, non-drying, insolubilization, low consistency.

SANDAO Thermal conductive material TDS vendor for heat sink-10

Gray paste

Excellent thermal conductivity, non curing, high temperature resistance, low adhesion pressure, low thermal resistance, good electrical insulativity.

SANDAO Thermal conductive material TDS vendor for heat sink-11

Iron bottle packaging

packaging specifications: 1.0kg / can.

Use instructions

Clean the surface, remove the greasy dirt, then extrude thermal conductive silicon grease directly.
The uniform coating should be applied to the surface. The coating can be brushed, scraped or rolled as needed.
If the user uses silicone oil to dilute, not only occur oil separation easily, but also make the thermal conductivity smaller. Therefore, we suggest customers choose their ideal models to ensure the using quality.

Caution

The coating surface should be uniform, coating more isn’t mean the better, but in the premise of filling the surface gap, coating a thin layer is enough.

Packaging and preservation

Packing specification: 1.0kg/ can, negotiable to according to the user's needs.

Storage: store in a cool and dry place for one year.

Note: The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you.

Company Features
1. Huizhou SANDAO New Material Co., Ltd always leads the peak in Thermal conductive material TDS field. SANDAO has a full set of quality control equipment imported to make sure the quality of Thermal conductive material TDS.
2. Mastering the technology of producing Thermal conductive material TDS has created more benefits for SANDAO.
3. With a professional and advanced laboratory, SANDAO can produce beautiful Thermal conductive material TDS with more confidence. SANDAO concentrates on the quality in line with the principle of customer service. Welcome to visit our factory!

z******j

With gas resistant rtv design, Thermal conductive material TDS produced by Huizhou SANDAO New Material Co., Ltd combines the existing structure with contemporary elements.

u******j

As for Thermal conductive material TDS produced by Huizhou SANDAO New Material Co., Ltd, it's more a matter of practicality than design.

l******p

Thermal conductive material TDS is made of high quality gas resistant rtv with perfect performance such as gas resistant rtv.

t******s

Huizhou SANDAO New Material Co., Ltd takes quality of materiel seriously.

i******e

In addition, SANDAO applies selected gas resistant rtv as well as elaborated-designed gas resistant rtv to develop our products.

o******c

Thermal conductive material TDS have always found a traditional use in the gas resistant rtv industries.

Product Message

*Name

Phone

*E-mail

*Content

SANDAO Thermal conductive material TDS vendor for heat sink