Company Advantages1. Our Thermal conductive material TDS is in varies styles for wide choice.
2. It is characterized by its remarkable temperature resistance. High-temperature oxidation resistant coating, which may react with the active molecule under high temperature, is applied on the surface.
3. The product has a nonporous surface. This means that there aren't any holes or cracks where spills or liquids could soak in.
4. Huizhou SANDAO New Material Co., Ltd has established a complete set of product development, production control, logistics distribution and after-sales service system.
5. Thermal conductive material TDS are tasteful and have long enjoyed great fame both at home and aboard.
High thermal conductivity silicone grease SD930
High thermal conductivity silicone grease SD930 is made by imported raw materials and formula .It’s compound of organosiloxane and metal oxides which with good thermal conductivity,good insulation thin coating thickness. This grease has excellent thermal conductivity, no curing, no powdering, high temperature resistance, low adhesion pressure, oxidation resistance, no air drying, no hardening or melting, low thermal resistance, good electrical insulation, wide operating temperature (-50 ℃ ~ 200 ℃), good stability, low consistency and good operation performance. The silicone grease is non-toxic, non-corrosive, tasteless, never curing and insoluble.
Thermal conductive silicone grease is widely used to fill the gap between power heating element and radiator, especially used for high power LED heat dissipation or coating to derive the heat produced by components. Such as CPU and radiator gap filling, high-power transistor, thyristor element, diode and substrate (aluminum, copper) converter, power module, oven, induction cooker, coffee pot gap filling, TV power amplifier tube and heat sink, Semiconductor refrigeration, etc. Reduce the working temperature of the heating element.
LED heat dissipation gap filling
| Performance | Test data |
| Appearance | Gray paste |
| Penetration degree（1/10mm，25℃） | 300～350 |
| Specific gravity（g/cm3） | 3-3.5 |
| Bleed（%。150℃，8h） | ≤2.0 |
| Fugitive constituent（%。150℃，8h） | ≤2.0 |
| Break down strength（kv/mm） | ≥2.0 |
| Volume resistivity（Ω.cm） | 4×1014 |
| Thermal conductivity（w/m·k） | ≥3.0 |
General purpose thermal grease
SD930 general-purpose thermal grease uses imported silicone-based one-component silicone thermal conductive grease.
Green environmental protection
Non-toxic, non-corrosive, odorless, non drying, insolublilization, low consistency.
Gray paste
Fully transparent and trace-free, epoxy resin is resistant to most chemicals and solvents and is resistant to temperatures from -40 to 120 °C.
Iron bottle packaging
packaging specifications: 1.0kg /can.
Clean the surface, remove the greasy dirt, then extrude thermal conductive silicon grease directly.
The uniform coating should be applied to the surface. The coating can be brushed, scraped or rolled as needed.
If the user uses silicone oil to dilute, not only occur oil separation easily, but also make the thermal conductivity smaller. Therefore, we suggest customers choose their ideal models to ensure the using quality.
Caution
The coating surface should be uniform, coating more isn’t mean the better, but in the premise of filling the surface gap, coating a thin layer is enough.
Packaging and preservation
bg
Packing specification: 1.0kg/ can, negotiable to according to the user's needs.
Storage: store in a cool and dry place for one year.
Note:
The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you.
Company Features1. Huizhou SANDAO New Material Co., Ltd, as a professional Thermal conductive material TDS manufacturer, has become a most reliable partner for many companies.
2. Huizhou SANDAO New Material Co., Ltd has a production base of thousands of square meters and hundreds of production employees.
3. Whether we're integrating cutting-edge technology to reduce our environmental impact, driving innovation to improve society or ensuring we operate ethically throughout our entire supply chain, we are fully committed to working as responsibly and sustainably as possible. Ask online! We not only provide high quality gas resistant rtv, but also provide professional services. Ask online! The company has realized that its success owes to the support of the people and communities. Therefore, the company has conducted a lot of community causes to support local economic growth in return. Ask online! The excellent quality and professional service of Huizhou SANDAO New Material Co., Ltd will satisfy you. Ask online!
