SANDAO gas resistant rtv has passed the workmanship review. It is checked for scratches, dents or excessive solder/glue; missing parts, sharp edges or points, etc. 2.
The product is reliable in high quality and performance. 3.
This product might be one of the greatest inventions that have reduced the works of man. It can do the job of more persons in less time. - Said one of our customers.
General type heat conductive silicone grease SD910
General type heat conductive silicone greaseSD910 is single component which is made from imported silicone as the main body, filling materials, thermal conductive materials and other polymer materials. It’s compound of organosiloxane and metal oxides which with good thermal conductivity and insulation. This grease has excellent thermal conductivity, no curing, no powdering, high temperature resistance, low adhesion pressure, oxidation resistance, no air drying, no hardening or melting, low thermal resistance, good electrical insulation, Wide operating temperature (-50 ℃ ~ 200 ℃), good stability, low consistency and good operation performance. The silicone grease is non-toxic, non-corrosive, tasteless, never curing and insoluble.
Sandao thermal conductive silicone grease is widely used to fill the gap between power heating element and radiator, especially used for high power LED heat dissipation or coating to derive the heat produced by components. Such as CPU and radiator gap filling, high-power transistor, thyristor element, diode and substrate (aluminum, copper) converter, power module, oven, induction cooker, coffee pot gap filling, TV power amplifier tube and heat sink, Semiconductor refrigeration, etc. Reduce the working temperature of the heating element.
LED heat dissipation gap filling
|Break down strength（kv/mm）||≥5.0|
General purpose thermal grease
SD910 Universal Thermal Grease is a one-component silicone thermal grease Based on imported silicone.
Non- toxic, non- corrosive, tasteless, non - drying, non - soluble, no air - drying hardening or melting.
Green environmental protection
High temperature resistance, low adhesion pressure, low thermal resistance, good electrical insulation, good service stability.
Iron bottle packaging
packaging specifications: 1.0kg /can
Clean the surface, remove the greasy dirt, then extrude thermal conductive silicon grease directly.
The uniform coating should be applied to the surface. The coating can be brushed, scraped or rolled as needed.
If the user uses silicone oil to dilute, not only occur oil separation easily, but also make the thermal conductivity smaller. Therefore, we suggest customers choose their ideal models to ensure the using quality.
The coating surface should be uniform, coating more isn’t mean the better, but in the premise of filling the surface gap, coating a thin layer is enough.
Packaging and preservation
Packing specification: 1.0kg/ can, negotiable to according to the user's needs.
Storage: store in a cool and dry place for one year.
Note: The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you. Company Features1.
Huizhou SANDAO New Material Co., Ltd leads in Thermal conductive material TDS production. 2.
We put great emphasis on technology of Thermal conductive material TDS. 3.
We constantly collaborate with our clients to ensure that our endeavors are strategically implemented to achieve economically sustainable development. We not only provide high quality gas resistant rtv, but also provide professional services. Get price!