superior Thermal conductive material TDS order now for oven

our product

General type heat conductive silicone grease SD910

General type heat conductive silicone greaseSD910 is single component which is made from imported silicone as the main body, filling materials, thermal conductive materials and other polymer materials. It’s compound of organosiloxane and metal oxides which with good thermal conductivity and insulation. This grease has excellent thermal conductivity, no curing, no powdering, high temperature resistance, low adhesion pressure, oxidation resistance, no air drying, no hardening or melting, low thermal resistance, good electrical insulation, Wide operating temperature (-50 ℃ ~ 200 ℃), good stability, low consistency and good operation performance. The silicone grease is non-toxic, non-corrosive, tasteless, never curing and insoluble.

Application

Sandao thermal conductive silicone grease is widely used to fill the gap between power heating element and radiator, especially used for high power LED heat dissipation or coating to derive the heat produced by components. Such as CPU and radiator gap filling, high-power transistor, thyristor element, diode and substrate (aluminum, copper) converter, power module, oven, induction cooker, coffee pot gap filling, TV power amplifier tube and heat sink, Semiconductor refrigeration, etc. Reduce the working temperature of the heating element.

SANDAO superior Thermal conductive material TDS order now for oven-2

High power triode

SANDAO superior Thermal conductive material TDS order now for oven-3

LED heat dissipation gap filling

SANDAO superior Thermal conductive material TDS order now for oven-4

Oven gap filling

SANDAO superior Thermal conductive material TDS order now for oven-5

Power module

SANDAO superior Thermal conductive material TDS order now for oven-6

Thyristor component

SANDAO superior Thermal conductive material TDS order now for oven-7

CPU gap filling

product Performance

Performance	Test data
Appearance	Gray paste
Penetration degree（1/10mm，25℃）	270～340
Specific gravity（g/cm3）	2.6-3.0
Bleed（%。150℃，8h）	≤3.0
Fugitive constituent（%。150℃，8h）	≤2.0
Break down strength（kv/mm）	≥5.0
Volume resistivity（Ω.cm）	4×10¹⁴
Thermal conductivity（w/m·k）	≥1.0

Product details

SANDAO superior Thermal conductive material TDS order now for oven-8

General purpose thermal grease

SD910 Universal Thermal Grease is a one-component silicone thermal grease Based on imported silicone.

SANDAO superior Thermal conductive material TDS order now for oven-9

Gray paste

Non- toxic, non- corrosive, tasteless, non - drying, non - soluble, no air - drying hardening or melting.

SANDAO superior Thermal conductive material TDS order now for oven-10

Green environmental protection

High temperature resistance, low adhesion pressure, low thermal resistance, good electrical insulation, good service stability.

SANDAO superior Thermal conductive material TDS order now for oven-11

Iron bottle packaging

packaging specifications: 1.0kg /can

Use instructions

Clean the surface, remove the greasy dirt, then extrude thermal conductive silicon grease directly.
The uniform coating should be applied to the surface. The coating can be brushed, scraped or rolled as needed.
If the user uses silicone oil to dilute, not only occur oil separation easily, but also make the thermal conductivity smaller. Therefore, we suggest customers choose their ideal models to ensure the using quality.

Caution

The coating surface should be uniform, coating more isn’t mean the better, but in the premise of filling the surface gap, coating a thin layer is enough.

Packaging and preservation

Packing specification: 1.0kg/ can, negotiable to according to the user's needs.

Storage: store in a cool and dry place for one year.

Note: The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you.

Company Features
1. Huizhou SANDAO New Material Co., Ltd is the most progressive manufacturer of gas resistant rtv in China. We focus on steady growth since establishment.
2. We have our own manufacturing shop. It is equipped with high efficiency and modern manufacturing machines, which enables us to process our orders quickly and flexibly.
3. SANDAO always insists on providing better service to customers. Contact us! Huizhou SANDAO New Material Co., Ltd is quite professional and faithful to the vision of surpassing clients. Contact us!

z******q

SANDAO Thermal conductive material TDS is produced introducing the world-class technology and equipment. The product is provided with OED and OEM service

d******s

SANDAO gas resistant rtv is designed in line with the international production standards. The product covers a wide range of functions

z******b

SANDAO gas resistant rtv is developed by using modern machinery and technology. It can run at a very high speed

n******p

SANDAOThermal conductive material TDS is manufactured under modern management system. It is highly automatic and requires little manpower

f******c

SANDAO gas resistant rtv is precisely manufactured using premium quality raw materials and advanced technology by our adroit professionals. The product adopts a water cooling system for better performance

w******p

The product is notable for durability. Its mechanical components and structure are all made of high-performance materials that are highly resistant to aging. The product can run super smoothly and noiselessly

Product Message

*Name

Phone

*E-mail

*Content

SANDAO superior Thermal conductive material TDS order now for oven