Company Advantages1. The production of SANDAO rtv silicone adopts internationally recognized standards.
2. The product has been approved by all required international certificates.
3. Our experienced QC teams ensure the product to be in its best quality.
4. After many times of QC checking, all delivered One-component RTV silicone rubber TDS are in high quality.
Printed circuit board coating SD399
Printed circuit board coating SD399 is a fluid, one-component, fast-curing, non-corrosive silicone rubber adhesive sealant that cures into a silicone elastomer in air. This product complies with: MIL-A-461468 Corrosive Test Standard. Excellent electrical insulation performance against ozone and chemical attack.
The silicone adhesive is suitable for waterproofing of electronic coatings, LCD modules for potting, solar energy, automobiles, home appliances, electrical appliances, circuit boards, etc.
Electronic product bonding
Type | SD399 | SD399B | SD399W |
Color | Colorless transparent semi-fluid | Black semi-fluid | White semi-fluid |
Density(g/cm3) | 1.0~1.1 | 1.0~1.1 | 1.0~1.1 |
Tack-free time(25℃,min) | ≤40 | ≤40 | ≤40 |
Tensile strength(MPa) | ≥1.5 | ≥1.5 | ≥1.5 |
Elongation(%) | 200~300 | 200~300 | 200~300 |
Shear strength(MPa) | ≥1.0 | ≥1.0 | ≥1.0 |
Hardness(shore A) | 20~30 | 20~30 | 20~30 |
Temperature (℃) | -50~200 | -50~200 | -50~200 |
Permittivity(@60Hz) | 2.8 | 2.8 | 2.8 |
Dielectric intesity(kV/mm) | ≥20 | ≥20 | ≥20 |
Volume Resistance(Ω.cm) | 2.0×1015 | 2.0×1015 | 2.0×1015 |
SD399 circuit board coated with silicone
SD399 circuit board coating is a fluid, one-component, fast curing, non-corrosive silicone rubber adhesive sealant.
Green environmental protection
Rapid vulcanization, very low odor, release of alcohol vapor during vulcanization
Colorless transparent rogue
Excellent heat resistance and cold resistance, -50 to 200 ° C, excellent weather resistance, ozone resistance and chemical resistance, excellent electrical insulation properties
Long storage period
Store in a cool, dry place with a shelf life of six months. Packing specification: 330ML / PCS or according to customer requirements.
First, surface of the substrate is cleaned to remove rust, dust and oil.
Second the silicone adhesive sealant has a surface cure time of about 20 minutes and is fully cured after 24 hours.
Notes:
1. Keep thermal paste out of reach of children.
2. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
Company Features1. SANDAO plays a leading role in enhancing the development of One-component RTV silicone rubber TDS industry.
2. The factory is built according to the requirements for the standard workshop. The production lines, illumination, ventilation, waste treatment areas, and sanitary condition are all seriously considered and well managed.
3. Our company understands the global nature of today's manufacturing industry and we are always ready to meet our customers' needs. Our products and services will always be customized to meet these needs. Call! Our vision is to expand our global business. We will strive hard to achieve this goal by improving our product quality and introducing talents. Call! Our company bears social responsibilities. Sustainability is achieved in our company through an appropriate balance of environmental stewardship, financial stability, and community involvement.