special bonding adhesive Silicone price for electrical products

Latest products

SD401ACyanoacrylateadhesive(superglue)

SD103Cyanoacrylateadhesive(superglue)

SD958 MS building all-purpose glue

SD858 Antibacterial and Antifungal Adhesive

Product Information
Feedback

Company Advantages
1. bonding adhesive has attracted much attention for its excellent design and has wide development prospects. It has been widely used in electronic device manufacturing
2. Since this product is naturally hypoallergenic, it’s perfectly suitable for people who are born with sensitive skin or allergies. Its quality directly benefits the service life of the products that use it
3. The reliable quality and excellent durability are the competitive edges of the product. Its curing exothermic peak is low and the curing shrinkage is small
4. Through the careful inspection of the professional QC team, SANDAO product is 100% qualified. The product has good aging resistance
5. bonding adhesive has competitive price which is able to make your cost recover quickly. It is resistant to high temperature and low-temperature alternation

our product

SANDAO Silicone bonding adhesive price for electrical products-1

SD401A Cyanoacrylate adhesive

General purpose glue, medium viscosity, high adhesive strength, excellent comprehensive performance.

Feature

◪ General purpose glue, medium viscosity, high adhesive strength, excellent comprehensive performance.

Application

It is suitable for leather ,wood, electronics, metals, plastics, rubber, toys, silicone, TPU,TPE, ABS etc.

SANDAO Silicone bonding adhesive price for electrical products-2

Leather bonding

SANDAO Silicone bonding adhesive price for electrical products-3

Metal bonding

SANDAO Silicone bonding adhesive price for electrical products-4

Plastic bonding

SANDAO Silicone bonding adhesive price for electrical products-5

Furniture bonding

SANDAO Silicone bonding adhesive price for electrical products-6

Rubber bonding

SANDAO Silicone bonding adhesive price for electrical products-7

Silica gel bonding

product Performance

Before curing
Appearance	transparent
Viscosity(mPa.s)	>300
density(g/c㎡)	1.05
After curing
Shear strength(Mpa)	>24
Temperature range（℃）	-55~85
Curing time (s)	15
Maximum filling gap (mm)	0.1

Product details

SANDAO Silicone bonding adhesive price for electrical products-8

SD401A Cyanoacrylate adhesive

General purpose glue, medium viscosity, high adhesive strength, excellent comprehensive performance.

SANDAO Silicone bonding adhesive price for electrical products-9

Transparent

It is suitable for leather ,wood, electronics, metals, plastics, rubber, toys, silicone, TPU,TPE, ABS etc.

SANDAO Silicone bonding adhesive price for electrical products-10

Green environmental protection

Low odor, no pollution.

SANDAO Silicone bonding adhesive price for electrical products-11

Packing

This product is packaged in plastic with 20g/ bottles or 1000g/ bottles;

Use instructions

Using process:
1) Use a dry cloth or abrasive paper to remove surface dust, oil agent, steel embroidery, then wipe and clean with acetone or trichloroethylene.
2) Open the front cover, flick tip by finger, make no residual liquid, and then poke open by using needle.
3) Drop a little glue to the surface, adhesive immediately and keep to hardening, curing time is few seconds to few minutes; reach the practical strength within 30mins, strength, reach the highest strength within 1-2 hours;
4) After use, wipe the tip, cover the lid.

Caution

1. The vapour of this glue will hurt eyes.
2. If hand touched, wash clean by using soap, water, pumice, otherwise it can curing in hand after a while, it will recede after a few days.
3. Avoid contact of eyes and skin. Wash immediately with water and consult a doctor immediately in case of accident.

Packaging and preservation

This product is packaged in plastic with 20g/ bottles or 1000g/ bottles.

The product should be stored in dry shade place (below 25 ℃).

The shelf time is 6 month.

Company Features
1. Huizhou SANDAO New Material Co., Ltd stands at forefront in the market of bonding adhesive.
2. Without the introduction of high-tech adhesive sealants methods, bonding adhesive could not have been so popular in the market.
3. To strengthen our overall competition, we insist on the principals of innovation drives growth. We will spare no effort to enhance our R&D ability to promote product innovation.

e******g

adhesive sealants is not only functional, but also has colourful and eye-catching styles. It has clean kerf with no burrs

l******e

There are a professional design team only responsible for design of bonding adhesive. After being cleaned with compressed air, it has no aluminum shavings

d******b

adhesive sealants materials are used in Huizhou SANDAO New Material Co., Ltd's adhesive sealants manufacturing. It has no grease or dirt after being treated with degreasing agents

a******k

With the design of bonding adhesive, our adhesive sealants is notably suitable for the usage in bonding adhesive. It goes through both hot and cold treatment, thus having good strength

u******r

The unique design of bonding adhesive overshadows that of other companies. It has a small tolerance being machined by advanced cutting equipment

p******a

It has good luster. Anti-yellowing technology has been adopted to process the surface, and the materials are all highly resistant to yellowing. Its surface can be treated to be bright or matte

Product Message

*Name

Phone

*E-mail

*Content

SANDAO Silicone bonding adhesive price for electrical products