SANDAO  > 

AI - Page Sitemap

 > 

SANDAO silicon Two-component addition-type potting adhesive TDS for rubber parts

SANDAO silicon Two-component addition-type potting adhesive TDS for rubber parts

SANDAO silicon Two-component addition-type potting adhesive TDS for rubber parts

Model number
SD6341
MOQ
1pcs
Color
White/black liquid
Package
1.25kg/ set
Main characteristic
Two-component Ratio is 4:1, no need of vacuum defoaming
Main application
silicon steel materials, roller core materials, coil windings,etc.
Lead time
within a week after payment
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Information of SANDAO silicon Two-component addition-type potting adhesive TDS for rubber parts
Product Comparison
SANDAO New Material has the ability to meet different needs. ms adhesive is available in multiple types and specifications. The quality is reliable and the price is reasonable.SANDAO New Material guarantees silicone rubber to be high-quality by carrying out highly standardized production. Compared with other products in the same category, it has the following advantages.
Company Advantages
1. Quality inspections and tests of SANDAO ge rtv silicone will be carried out by the QC team. It will be scrutinized for different aspects, including bending, impact, compression, hardness, aging, and abrasion resistance performance.
2. Two-component addition-type potting adhesive TDS can better meet the requirements of costumers with its ge rtv silicone features.
3. Huizhou SANDAO New Material Co., Ltd has the capability to produce Two-component addition-type potting adhesive TDS with ge rtv silicone.
4. With years of business practice, SANDAO has established ourselves and maintained excellent business relationship with our customers.

our product

bg


SANDAO silicon Two-component addition-type potting adhesive TDS for rubber parts-1
Epoxy resin potting sealant SD6341
Epoxy resin potting sealant SD6341 is a two-component electronic material used for general electronic component sealing and circuit board sealing. It can be cured at room temperature or heated, and the cost is lower. Temperature during curing is low and the highest exothermic temperature is less than 50 ℃. Good surface gloss, low shrinkage, excellent moisture resistance and insulation after curing.

Application

bg


Epoxy resin pouring sealant is widely used in silicon steel materials, roller core materials, coil windings, capacitor bushing and other important radiating and high temperature resistance electronic appliances, such as transformers, motors, radiators, sensors, electromagnets, PCB plates, solenoid valves, air conditioners, power module, electromagnetic clutch, automobile parts, etc.

SANDAO silicon Two-component addition-type potting adhesive TDS for rubber parts-2

air conditioning

SANDAO silicon Two-component addition-type potting adhesive TDS for rubber parts-3

heat sink

SANDAO silicon Two-component addition-type potting adhesive TDS for rubber parts-4

Induction cooker bonding


SANDAO silicon Two-component addition-type potting adhesive TDS for rubber parts-5

PCB board bonding

SANDAO silicon Two-component addition-type potting adhesive TDS for rubber parts-6

Power module

SANDAO silicon Two-component addition-type potting adhesive TDS for rubber parts-7

Motor bonding



product Performance

bg


Characteristics
  • ◪  Two-component 4:1 ratio, 100% solidification, no solvent, no pollution, no toxicity.

  • ◪  Good weather resistance, water resistance, oil resistance, acid resistance, high temperature resistance, insulation, flame retardant, cracking resistance and so on.

  • ◪  Can be cured at room temperature and heating, high bonding strength. Stable performance, good toughness and filling after curing, excellent physical, mechanical and insulation properties.

  •   It has low viscosity after mixing, no need of vacuum defoaming at room temperature, and long operating time, so it’s a kind of ideal pouring glue.

  •   For some larger parts of the pouring and sealing, can be one-time molding, more operational advantages.

  •   Achieve actually measured high thermal conductivity: 0.8w/m.k

General performance
ItemConditionPart APart BMix liquid
AppearanceVisualWhite/black Viscous liquidTransparent / brown liquidWhite/black liquid
Density25℃,g/cm31.64~1.651.11~1.131.59~1.61
Viscosity25℃, mpa.s12000~1300040~120800~1000

Usage: 1.Mixing: mix part A and part B at 4:1 ratio by weight, potting after stir well. The operating time after mixing is 60 minutes at 25 ℃.
2.Solidification: at 25 ℃, it will harden at 6 for 8 hours, and at 80 ℃ for 1 hour. It can be assembled after hardening. Tests typically take place after 24 hours of curing.

Notes:This data is measured by the technicians in the laboratory, which has certain reference value for the users. However, because the usage methods and conditions of each user are different, it is suggested that the users should find out the best technology and method according to their own conditions.


Feature after curing
Itemcondition/unitTest result
HardnessShore-D>80
Volume resistivity25℃,Ω.cm2.8*1015
Breakdown voltage25℃,kv/mm>30
Dielectric constant25℃,1MHZ3.1±0.1
Dielectric loss tangent25℃,1MHZ<0.01
Shear temperature rangeMpa>10
Operating temperature range-40~150
Curing shrinkage%<0.5

Attention: 1, This kind of products are not dangerous goods, according to the general chemical storage and transportation, the storage period is 1 year.
2, A component should be stirred properly before use (as there will be precipitation after long period of time, it does not affect the performance after stir well,); after accurate weighing of component A and component B, please stir well and then use it.
3, The mixing amount of glue should not be too large, otherwise, the operating time will be shortened which lead to waste if cannot use out timely.

Notes:The above performance data are typical data of the product at humidity 70 ℃, temperature 25 ℃,for customer's reference only. Customers are kindly requested to use the measured data.

Product details

bg
SANDAO silicon Two-component addition-type potting adhesive TDS for rubber parts-8
Epoxy resin potting and sealing adhesive
SD6341 epoxy potting compound is a two-component electronic material used for Potting of general electronic components And circuit board sealing.
SANDAO silicon Two-component addition-type potting adhesive TDS for rubber parts-9
White/black viscous liquid
It can be cured at room temperature, and can be Cured by heating. After curing, the surface gloss Is good, the shrinkage rate is low, and the Moisture resistance and insulation Performance are excellent.
SANDAO silicon Two-component addition-type potting adhesive TDS for rubber parts-10
Green environmental protection
Non-toxic, non-corrosive, free of harmful Substances.
SANDAO silicon Two-component addition-type potting adhesive TDS for rubber parts-11
Plastic bottle packaging
packaging specifications: 1.25kg/ set.

Company Features
1. Since inception, Huizhou SANDAO New Material Co., Ltd has been actively expanding capabilities for manufacturing ge rtv silicone and leads innovative and creative solutions to the changing needs of the industry.
2. Huizhou SANDAO New Material Co., Ltd boasts technology with advanced production.
3. Our focus on sustainable business practices covers all areas of our business. From maintaining safe working conditions to focusing on becoming a good environmental manager, we are working hard for a sustainable tomorrow. Get an offer! We always maintain professionalism in every production process Two-component addition-type potting adhesive TDS. Get an offer! We have a strong sense of service. We place the clients at the core of our company's operation. The product we offer, the logistics, pre-sale and after-sale services are all client-oriented. Get an offer!
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...