One-component RTV silicone rubber TDS has been made reinforcements at every weak points. 2.
The product does not have a circuit failure problem. All circuits are 100% electrically tested to make sure the components and parts operate stably. 3.
Years of application prove the broad market acceptance of this product. 4.
It adapts to a variety of different scenarios.
silicone rubber special adhesive SD9091
Silicone adhesive SD9091 is a kind of silicone adhesive which can be bonded silica gel with silica gel. It is colorless and translucent viscous liquid, excellent insulation, good adhesion, bonding directly without special treatment. high strength, Slow dry type, good softness of adhesive area after curing, moisture-proof, anti-seismic, corona resistance, anti-leakage resistance, anti-cold and hot alternating property (-60 ~ 260 ℃).
◪ Bonding silica gel directly without special treatment. high strength, slow dry type, soft adhesive area after curing, align the adhesive surface for 10 minutes, after gluing, put 24 hours to stick firmly.
◪ Sensitive material will not be corrosive, not white.
1) The silicone special adhesive is used for adhesive bonding silica gel with plastic, silica gel with metal, silica gel with silica gel etc.
2) The silicone special adhesive is widely used for silicone mobile phone case, silicone toys, cartoon silicone, silicone sealed tube etc.
3) Bonding and moisture proof seal of Silicon Gel with hardware.
Silicone and plastic bonding
Silicone and silicone bonding
|Appearance||Colorless transparent semi-fluid||Black semi-fluid|
|Tack-free time （25℃,min）||5～10||5～10|
|Hardness (shore A)||8～15||8～15|
Silicone rubber special adhesive
SD9091 silicone series is a kind of silicone adhesive which can be used to bond silicone with silicone.
Neutral non-corrosive, odorless, non-pollution, anti-vibration, corona resistance, anti-leakage, no harmful substances.
Excellent insulation, good adhesion, high strength, slow drying, excellent adhesion area softness after curing.
Metal hose packaging
Packing specification: 100g/tube, 310ml/cartridge
Clean the surface of objects which to be sticky or coated, remove rust, dust and oil.
First prick the rubber pipe with the cap tip, put the tip on, squeeze the glue into the cleaned surface, distribute it evenly, and fasten the adhesive surface together.
The coated parts are placed in air and solidified at room temperature for 24 hours.
1. After the operation is completed, the silicone sealant should tighten the cap immediately and seal and save.
2. When reusing, if there is a little skin seal, remove it. this will not affect the normal use.
Packaging and preservation
Packing specification: 100ml/pcs, 310ml/pcs or as required by customer.
Storage: stored in a cool and dry place for 12 months.
Note: Company Features1.
The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you.
The technology of One-component RTV silicone rubber TDS production in Huizhou SANDAO New Material Co., Ltd is very advanced. 2.
Our exceptional R&D talents are equipped with deep experience. They spend most of their times on the research and development and keep up with the market trend. 3.
SANDAO has made up the mind to acquire the rtv silicone rubber marketplace. Call now! Huizhou SANDAO New Material Co., Ltd will lead the future of what is rtv silicone market. Call now!