SANDAO  >  AI - Page Sitemap  >  SANDAO sealant One-component RTV silicone rubber TDS factory for screws
SANDAO sealant One-component RTV silicone rubber TDS factory for screws

SANDAO sealant One-component RTV silicone rubber TDS factory for screws

Model number
SD916
MOQ
1pcs
Color
white paste/white semi-fluid
Package
150ml/pcs, 310ml/pcs, 2.6L/pcs
Main characteristic
Thermal conductivity is 1.2
Main application
bonding between CPU and heat sink, the high-power electrical module etc.
Lead time
within a week after payment
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
SANDAO New Material's silicone rubber is commonly praised in the market due to good materials, fine workmanship, reliable quality, and favorable price.Compared with other same kind of products in the market, SANDAO New Material's silicone rubber is equipped with the following outstanding advantages.
  • v s
Application Scope
SANDAO New Material's ms adhesive can be used in different fields.Guided by the actual needs of customers, SANDAO New Material provides comprehensive, perfect and quality solutions based on the benefit of customers.
Company Advantages
1. One-component RTV silicone rubber TDS as an important product in its industry should be designed with what is rtv silicone.
2. Our strict quality management system ensures that our products are always in the best quality.
3. People don't have to worry about the hygiene problem because it is less likely to pose the risk of scaling and proliferation of bacteria.

our product

bg


SANDAO sealant One-component RTV silicone rubber TDS factory for screws-1
Thermal conductive silica gel SD916
Thermal conductive silica gel SD916 has both bonding and good thermal (heat dissipation) properties. The thermal conductive silica gel is a reinforced neutral silicone elastic rubber. After curing, the rubber has good resistance to high and low temperature changes. It will not fall off after long-term use, and will not cause contact gaps to reduce heat dissipation.

Application

bg


The most important application is to replace the thermal grease (paste) for the filling and bonding between the CPU and the heat sink, the thyristor intelligent control module and the heat sink, the high-power electrical module and the heat sink.

SANDAO sealant One-component RTV silicone rubber TDS factory for screws-2

Microwave oven adhesive seal

SANDAO sealant One-component RTV silicone rubber TDS factory for screws-3

Radiator filling and bonding

SANDAO sealant One-component RTV silicone rubber TDS factory for screws-4

Refrigerator bonding seal


SANDAO sealant One-component RTV silicone rubber TDS factory for screws-5

Semiconductor material bonding

SANDAO sealant One-component RTV silicone rubber TDS factory for screws-6

Thyristor filling and bonding

SANDAO sealant One-component RTV silicone rubber TDS factory for screws-7

CPU bonding



product Performance

bg


TypeSD916SD9201SD920
Colorwhitewhitewhite
Viscosity(cp)pastepastesemi-fluid
Density(g/cm3)2.0~2.52.0~2.53.0~3.5
Tack-free time(25℃,min)≤30≤30≤30
Tensile strength (MPa)≥2.5≥2.5≥2.5
Elongation(%)≥100≥100≥100
Shear strength(MPa)≥1.5≥1.5≥1.5
Hardness (shore A)50~6550~6550~65
Temperature range(℃)-60~280-60~280-60~280
Dielectric intesity(kV/mm)≥18≥18≥18
Permittivity(@60Hz)2.82.82.8
Volume Resistance(Ω.cm)1×10151×10151×1015
Thermal conductivity(w/(m.k)) 1.20.82.0

Product details

bg
SANDAO sealant One-component RTV silicone rubber TDS factory for screws-8
Thermal conductivity paste
SD916 thermal silica gel is a one-component Room temperature curing adhesive It has both bonding and good thermal (heat dissipation) properties.
SANDAO sealant One-component RTV silicone rubber TDS factory for screws-9
Eco-environmental protection
Neutral non-corrosive, odorless, non-pollution,Is a reinforced neutral silicone elastic rubber.
SANDAO sealant One-component RTV silicone rubber TDS factory for screws-10
White paste
After curing, it has excellent resistance to high and low temperature, will not fall off after long-term use, and will not produce bonding gap to reduce heat dissipation effect.
SANDAO sealant One-component RTV silicone rubber TDS factory for screws-11
Metal hose packaging
Packaging specifications: 100g /tube, 310ml/ plastic cartridge,2.6L/ bottle

Use instructions

bg


  • Cleaning the surface of the adhered or coated object to remove rust, dust and oil.

  • Unscrew the rubber cap and squeeze the glue onto the cleaned surface to make it evenly distributed.

  • Place the glued or sealed parts in the air to allow them to cure naturally. The curing process is a curing process from the surface to the inside. The glue will cure to a depth of 2-4 mm within 24 hours (room temperature and 55% relative humidity). If the position is deep, especially in areas where air is not easily accessible, The time to complete cure will be extended, and if the temperature is lower, the cure time will also be extended.

Notes:

  • 1.   Keep thermal paste out of reach of children.

  • 2.   Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.


Company Features
1. SANDAO has established the first brand image of the One-component RTV silicone rubber TDS industry in China rtv silicone rubber .
2. All testing reports are available for our One-component RTV silicone rubber TDS.
3. Through consciously practicing the guidelines of what is rtv silicone, Huizhou SANDAO New Material Co., Ltd has formed unique competitive advantages. Get info! rtv silicone is regarded as the Huizhou SANDAO New Material Co., Ltd's service tenet. Get info! Huizhou SANDAO New Material Co., Ltd will strive to be a highly responsible and highly respected company in One-component RTV silicone rubber TDS area. Get info!
SANDAO rtv silicone rubber has to go through the following production stages: CAD software design, fabrication of aluminum frame, track creation, and installation of all accessories. Made of premium building material, its slab is sturdy and durable
SANDAO what is rtv silicone has been tested for guaranteed safety. It has passed the electric strength test, also known as high-voltage insulation test under different rated voltage conditions. Blended with resins, it has a good surface finish
During the preliminary stage, SANDAO rtv silicone rubber has to go through the ore extraction process. This process includes several stages, namely, beneficiation, refine, and melt processes. The product has passed the fire resistance test
The coil springs SANDAO rtv silicone rubber contains could be between 250 and 1,000. And a heavier gauge of wire will be used if customers require fewer coils. It features high accuracy with thickness tolerance controlled within +0.5 mm
The design of SANDAO rtv silicone rubber is scientific and humanized. It is designed adopting the concept of less effort and minimized pool cleaning time provided by the designers.
what is rtv silicone's design uses One-component RTV silicone rubber TDS concept, is One-component RTV silicone rubber TDS. Adopting with advanced water jet scalpel technique, its surface is treated evenly
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...