SANDAO  >  AI - Page Sitemap  >  SANDAO resin Two-component addition-type potting adhesive TDS producer for electrical products
SANDAO resin Two-component addition-type potting adhesive TDS producer for electrical products

SANDAO resin Two-component addition-type potting adhesive TDS producer for electrical products

Model number
SD6341
MOQ
1pcs
Color
White/black liquid
Package
1.25kg/ set
Main characteristic
Two-component Ratio is 4:1, no need of vacuum defoaming
Main application
silicon steel materials, roller core materials, coil windings,etc.
Lead time
within a week after payment
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Details
SANDAO New Material pursues excellent quality and strives for perfection in every detail during the production.silicone rubber, manufactured based on high-quality materials and advanced technology, has excellent quality and favorable price. It is a trustworthy product which receives recognition and support in the market.
Product Comparison
SANDAO New Material carries out strict quality monitoring and cost control on each production link of ms adhesive, from raw material purchase, production and processing and finished product delivery to packaging and transportation. This effectively ensures the product has better quality and more favorable price than other products in the industry.SANDAO New Material's ms adhesive has better quality than other products in the industry, which is specifically shown in the following aspects.
  • v s
Company Advantages
1. We update Two-component addition-type potting adhesive TDS with modern technology frequently, making it ge rtv silicone.
2. The product will not generate static. During the treatment of the material, it has been treated with the antistatic agent.
3. With a strong sense of responsibility, SANDAO has been very popular in the Two-component addition-type potting adhesive TDS field.

our product

bg


SANDAO resin Two-component addition-type potting adhesive TDS producer for electrical products-1
Epoxy resin potting sealant SD6341
Epoxy resin potting sealant SD6341 is a two-component electronic material used for general electronic component sealing and circuit board sealing. It can be cured at room temperature or heated, and the cost is lower. Temperature during curing is low and the highest exothermic temperature is less than 50 ℃. Good surface gloss, low shrinkage, excellent moisture resistance and insulation after curing.

Application

bg


Epoxy resin pouring sealant is widely used in silicon steel materials, roller core materials, coil windings, capacitor bushing and other important radiating and high temperature resistance electronic appliances, such as transformers, motors, radiators, sensors, electromagnets, PCB plates, solenoid valves, air conditioners, power module, electromagnetic clutch, automobile parts, etc.

SANDAO resin Two-component addition-type potting adhesive TDS producer for electrical products-2

air conditioning

SANDAO resin Two-component addition-type potting adhesive TDS producer for electrical products-3

heat sink

SANDAO resin Two-component addition-type potting adhesive TDS producer for electrical products-4

Induction cooker bonding


SANDAO resin Two-component addition-type potting adhesive TDS producer for electrical products-5

PCB board bonding

SANDAO resin Two-component addition-type potting adhesive TDS producer for electrical products-6

Power module

SANDAO resin Two-component addition-type potting adhesive TDS producer for electrical products-7

Motor bonding



product Performance

bg


Characteristics
  • ◪  Two-component 4:1 ratio, 100% solidification, no solvent, no pollution, no toxicity.

  • ◪  Good weather resistance, water resistance, oil resistance, acid resistance, high temperature resistance, insulation, flame retardant, cracking resistance and so on.

  • ◪  Can be cured at room temperature and heating, high bonding strength. Stable performance, good toughness and filling after curing, excellent physical, mechanical and insulation properties.

  •   It has low viscosity after mixing, no need of vacuum defoaming at room temperature, and long operating time, so it’s a kind of ideal pouring glue.

  •   For some larger parts of the pouring and sealing, can be one-time molding, more operational advantages.

  •   Achieve actually measured high thermal conductivity: 0.8w/m.k

General performance
ItemConditionPart APart BMix liquid
AppearanceVisualWhite/black Viscous liquidTransparent / brown liquidWhite/black liquid
Density25℃,g/cm31.64~1.651.11~1.131.59~1.61
Viscosity25℃, mpa.s12000~1300040~120800~1000

Usage: 1.Mixing: mix part A and part B at 4:1 ratio by weight, potting after stir well. The operating time after mixing is 60 minutes at 25 ℃.
2.Solidification: at 25 ℃, it will harden at 6 for 8 hours, and at 80 ℃ for 1 hour. It can be assembled after hardening. Tests typically take place after 24 hours of curing.

Notes:This data is measured by the technicians in the laboratory, which has certain reference value for the users. However, because the usage methods and conditions of each user are different, it is suggested that the users should find out the best technology and method according to their own conditions.


Feature after curing
Itemcondition/unitTest result
HardnessShore-D>80
Volume resistivity25℃,Ω.cm2.8*1015
Breakdown voltage25℃,kv/mm>30
Dielectric constant25℃,1MHZ3.1±0.1
Dielectric loss tangent25℃,1MHZ<0.01
Shear temperature rangeMpa>10
Operating temperature range-40~150
Curing shrinkage%<0.5

Attention: 1, This kind of products are not dangerous goods, according to the general chemical storage and transportation, the storage period is 1 year.
2, A component should be stirred properly before use (as there will be precipitation after long period of time, it does not affect the performance after stir well,); after accurate weighing of component A and component B, please stir well and then use it.
3, The mixing amount of glue should not be too large, otherwise, the operating time will be shortened which lead to waste if cannot use out timely.

Notes:The above performance data are typical data of the product at humidity 70 ℃, temperature 25 ℃,for customer's reference only. Customers are kindly requested to use the measured data.

Product details

bg
SANDAO resin Two-component addition-type potting adhesive TDS producer for electrical products-8
Epoxy resin potting and sealing adhesive
SD6341 epoxy potting compound is a two-component electronic material used for Potting of general electronic components And circuit board sealing.
SANDAO resin Two-component addition-type potting adhesive TDS producer for electrical products-9
White/black viscous liquid
It can be cured at room temperature, and can be Cured by heating. After curing, the surface gloss Is good, the shrinkage rate is low, and the Moisture resistance and insulation Performance are excellent.
SANDAO resin Two-component addition-type potting adhesive TDS producer for electrical products-10
Green environmental protection
Non-toxic, non-corrosive, free of harmful Substances.
SANDAO resin Two-component addition-type potting adhesive TDS producer for electrical products-11
Plastic bottle packaging
packaging specifications: 1.25kg/ set.

Company Features
1. With a large-scale factory base, Huizhou SANDAO New Material Co., Ltd has a large capacity for producing Two-component addition-type potting adhesive TDS.
2. In order to lead the Two-component addition-type potting adhesive TDS industry, SANDAO invested a lot of money to absorb new technologies.
3. Huizhou SANDAO New Material Co., Ltd is committed to technological innovation, ensure the quality of our products. Check it! SANDAO concentrates on providing high quality service for customers. Check it! Excellence in quality of Two-component addition-type potting adhesive TDS and professional in service are what SANDAO pursues. Check it! Huizhou SANDAO New Material Co., Ltd firmly adheres to professional service to every customer. Check it!
Our ge rtv silicone enjoys a longer lifespan than other similar products for its ge rtv silicone material. Xindali has more than 70 patents now, and there are some other series are under application of International PCT
In Huizhou SANDAO New Material Co., Ltd, you can have multiple choices for shapes of ge rtv silicone. Xindali is a professional manufacturer for push button switch & emergency push button since 1997
The main components of ge rtv silicone are made from imported materials. Most of the products have passed the certification of C E, R o H S, T U V. U L
Finished in Two-component addition-type potting adhesive TDS material, our ge rtv silicone can offer many advantages. Products are mainly sold in the European market and have their own brand agents in Italy, Germany, Poland and so on
Compared with the other similar ge rtv silicone, Two-component addition-type potting adhesive TDS has a novel design. Xindali Was built since 1997, focus on the button switch industry, is located in the famous low voltage appliance market Liushi in Wenzhou City
A quality management system guarantees the quality of this product. Most of the products have passed the certification of C E, R o H S, T U V. U L
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...