Quality assurance for SANDAO ge rtv silicone is a highly demanding process. The product has been tested in many ways, such as substances, colorfastness check (CF to light, ozone, water, bleach), weather resistance, antibacterial & antimicrobial performance, and so on. 2.
It delivers good building energy performance. Relative performance is measured when possible using various analysis software such as Ecotect and EnergyPlus. Designs are tuned based on the results. 3.
The product is features reliability and stability. Its electrical leakage risks have been already removed and it can work smoothly. 4.
The product has received great trust and high praise from the vast of customers, showing a great market potential.
Epoxy resin potting sealant SD6341
Epoxy resin potting sealant SD6341 is a two-component electronic material used for general electronic component sealing and circuit board sealing. It can be cured at room temperature or heated, and the cost is lower. Temperature during curing is low and the highest exothermic temperature is less than 50 ℃. Good surface gloss, low shrinkage, excellent moisture resistance and insulation after curing.
Epoxy resin pouring sealant is widely used in silicon steel materials, roller core materials, coil windings, capacitor bushing and other important radiating and high temperature resistance electronic appliances, such as transformers, motors, radiators, sensors, electromagnets, PCB plates, solenoid valves, air conditioners, power module, electromagnetic clutch, automobile parts, etc.
◪ Two-component 4:1 ratio, 100% solidification, no solvent, no pollution, no toxicity.
◪ Good weather resistance, water resistance, oil resistance, acid resistance, high temperature resistance, insulation, flame retardant, cracking resistance and so on.
◪ Can be cured at room temperature and heating, high bonding strength. Stable performance, good toughness and filling after curing, excellent physical, mechanical and insulation properties.
◪ It has low viscosity after mixing, no need of vacuum defoaming at room temperature, and long operating time, so it’s a kind of ideal pouring glue.
◪ For some larger parts of the pouring and sealing, can be one-time molding, more operational advantages.
◪ Achieve actually measured high thermal conductivity: 0.8w/m.k
|Item||Condition||Part A||Part B||Mix liquid|
|Appearance||Visual||White/black Viscous liquid||Transparent / brown liquid||White/black liquid|
Usage: 1.Mixing: mix part A and part B at 4:1 ratio by weight, potting after stir well. The operating time after mixing is 60 minutes at 25 ℃.
2.Solidification: at 25 ℃, it will harden at 6 for 8 hours, and at 80 ℃ for 1 hour. It can be assembled after hardening. Tests typically take place after 24 hours of curing.
Notes:This data is measured by the technicians in the laboratory, which has certain reference value for the users. However, because the usage methods and conditions of each user are different, it is suggested that the users should find out the best technology and method according to their own conditions.
|Feature after curing|
|Dielectric loss tangent||25℃，1MHZ||<0.01|
|Shear temperature range||Mpa||>10|
|Operating temperature range||℃||-40~150|
Attention: 1, This kind of products are not dangerous goods, according to the general chemical storage and transportation, the storage period is 1 year.
2, A component should be stirred properly before use (as there will be precipitation after long period of time, it does not affect the performance after stir well,); after accurate weighing of component A and component B, please stir well and then use it.
3, The mixing amount of glue should not be too large, otherwise, the operating time will be shortened which lead to waste if cannot use out timely.
Notes:The above performance data are typical data of the product at humidity 70 ℃, temperature 25 ℃,for customer's reference only. Customers are kindly requested to use the measured data.
Epoxy resin potting and sealing adhesive
SD6341 epoxy potting compound is a two-component electronic material used for Potting of general electronic components And circuit board sealing.
White/black viscous liquid
It can be cured at room temperature, and can be Cured by heating. After curing, the surface gloss Is good, the shrinkage rate is low, and the Moisture resistance and insulation Performance are excellent.
Green environmental protection
Non-toxic, non-corrosive, free of harmful Substances.
Plastic bottle packaging
packaging specifications: 1.25kg/ set.
Huizhou SANDAO New Material Co., Ltd has been focused on Two-component addition-type potting adhesive TDS design, construction and service for decades. 2.
ge rtv silicone technology is performed by our experienced technicians to make sure the quality of Two-component addition-type potting adhesive TDS. 3.
Since our inception, we always strive to improve the lives of consumers worldwide by offering them branded products with superior quality and value. Get info! We enforce the standards in our Supplier Code of Conduct with our manufacturing suppliers and review environmental practices during audits of such suppliers. We are always looking towards the future, introducing new product concepts that anticipate business, industry and consumer needs following the dictum – 'The ability to dream, The will to do.' Get info! Customer-orientation is our business principle. In our business activities or cultures, we will always promote customer-centricity, which means we will try best to make every customer feel valued and put possible efforts to create a delightful experience.