reliable nail free adhesive allpurpose for electronic products

Latest products

SD401ACyanoacrylateadhesive(superglue)

SD103Cyanoacrylateadhesive(superglue)

SD958 MS building all-purpose glue

SD858 Antibacterial and Antifungal Adhesive

Product Information
Feedback

Product Comparison

Closely following the market trend, SANDAO New Material uses advanced production equipment and manufacturing technology to produce ms adhesive. The product receives favors from the majority of customers for the high quality and favorable price. ms adhesive has the following advantages over other products in the same category.

Enterprise Strength

SANDAO New Material takes constant innovation and improvement on the service model and strives to provide efficient and considerate services for customers.

Company Advantages
1. New technologies are utilized in the design of SANDAO ms polymer sealant to transfer its construction to technical implementation. These technologies include multi-material 3D printing, advances in materials science and new capabilities in simulation software.
2. Strong stability is one of its biggest selling points. Its stiles have been laminated to further enhance firmness and toughness.
3. The product features strong electromagnetic compatibility (EMC). It has been totally tested, minimizing the risk of interference to the radio spectrum.
4. ms polymer sealant produced by Huizhou SANDAO New Material Co., Ltd is highly marketable.

our product

SANDAO reliable nail free adhesive for electronic products-1

SD838 all-purpose nail-free adhesive

SD838 all-purpose nail-free adhesive is a new type of modified silane sealant with low modulus and high elasticity, which is mainly aimed at solve the problems of joint shrinkage deformation, poor weathering resistance of sealant and poor adhesion between sealant and substrate. The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance, no substrate pollution, non-toxic low VOC, non-corrosive mirror, and have excellent adhesive properties with concrete, stone, ceramics and glass and other substrates and so on.

Application

Multifunctional adhesives can be used for bonding, sealing and repairing cracks.

High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.

SANDAO reliable nail free adhesive for electronic products-2

baseboard clearance

SANDAO reliable nail free adhesive for electronic products-3

glass bonding

SANDAO reliable nail free adhesive for electronic products-4

stone bonding

SANDAO reliable nail free adhesive for electronic products-5

wall drill bonding

SANDAO reliable nail free adhesive for electronic products-6

wall gap bonding

SANDAO reliable nail free adhesive for electronic products-7

window gap bonding

product Performance

Type	SD838
Color	yellow
Viscosity (pa.s) 10rpm	900
Initial curing time（mins）	30
100% modulus (Mpa)	1.2
Elongation at break（N/mm）	230
Tensile strength（MPa）	1.5

Product details

SANDAO reliable nail free adhesive for electronic products-8

SD838 universal nail-free glue

SD838MS universal nail-free adhesive is a new type of modified silane sealant with a low modulus and high elasticity single component.

SANDAO reliable nail free adhesive for electronic products-9

Light yellow

The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance.

SANDAO reliable nail free adhesive for electronic products-10

Environmental protection

No solvent, environmental protection, odorlessness, instant positioning.

SANDAO reliable nail free adhesive for electronic products-11

Storage

Store in a cool and dry place under normal temperature, storage period is 12 months.

Use instructions

The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .

Notes：

1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.

Company Features
1. Over the years, Huizhou SANDAO New Material Co., Ltd has accumulated much experience in developing and manufacturing of ms polymer sealant in the domestic markets.
2. Under the strict quality management, SANDAO nail free adhesive enjoy high performance with finest quality.
3. We stick to sustainable processes. All emissions, whether gases, liquids, or solid and metal wastes, are monitored, treated where necessary, and sent for reuse or recycling wherever possible. We care about the environment. We use environmentally friendly technologies in our production activities to minimize possible adverse effects on the environment. Get quote!

g******p

Huizhou SANDAO New Material Co., Ltd Strict checks are carried out during the supply of raw materials and the process of product production to ensure that the ms polymer sealant produced are of reliable quality, and the appearance, function, and quality of the product are carefully inspected before the goods are sent out to ensure that the products sold The products are consistent with the product descriptions displayed by us.

n******m

Huizhou SANDAO New Material Co., Ltd not only has a professional production and quality inspection team, but also introduces advanced production equipment and testing equipment to ensure that the ms polymer sealant produced are all high-quality products that meet the national product quality standards.

y******j

Huizhou SANDAO New Material Co., Ltd There are modern workshops, standardized production workshops, automated production equipment, strict quality inspection system, etc., which can ensure that all ms polymer sealant produced by our company are of qualified and high quality.

g******p

Huizhou SANDAO New Material Co., Ltd has modern workshops and equipment, and has multiple sets of imported inspection and testing devices, and the production personnel strictly follow the national quality management system during production ms polymer sealant to ensure that ms polymer sealant provided to customers is of excellent quality , high quality products.

m******l

We have a professional production management team, an independent production and processing workshop and advanced production technology, providing strong support and guarantee for the production of ms polymer sealant with reasonable structure, excellent performance, safety and reliability.

n******c

The product has good surface finish. It is dipped into the designated paint or coatings for some time and wiped dry to get the sleek finishing. Even stored for a long time, this product is bacteria-free

Product Message

*Name

Phone

*E-mail

*Content

SANDAO reliable nail free adhesive for electronic products