Related Products
◪ Bonding silica gel directly without special treatment. high strength, slow dry type, soft adhesive area after curing, align the adhesive surface for 10 minutes, after gluing, put 24 hours to stick firmly.
◪ Sensitive material will not be corrosive, not white.
1) The silicone special adhesive is used for adhesive bonding silica gel with plastic, silica gel with metal, silica gel with silica gel etc.
2) The silicone special adhesive is widely used for silicone mobile phone case, silicone toys, cartoon silicone, silicone sealed tube etc.
3) Bonding and moisture proof seal of Silicon Gel with hardware.
Silicone phone case
Silicone products
Silicone toy
Silicone and plastic bonding
Silicone and silicone bonding
Silicone sealed tube
| Item | SD9091T | SD9091B |
| Appearance | Colorless transparent semi-fluid | Black semi-fluid |
| Density(g/cm3) | 1.0～1.05 | 1.0～1.05 |
| Tack-free time （25℃,min） | 5～10 | 5～10 |
| Tensile strength（MPa） | ≥1.0 | ≥1.0 |
| Elongation（%） | ≥400 | ≥400 |
| Shear strength（MPa） | ≥0.6 | ≥0.6 |
| Hardness (shore A) | 8～15 | 8～15 |
| Dielectric constant（@60Hz） | 2.8 | 2.8 |
| Dielectric strength（kV/mm） | ≥22 | ≥22 |
| Volume resistivity（Ω.cm） | 2.0×1015 | 2.0×1015 |
Clean the surface of objects which to be sticky or coated, remove rust, dust and oil.
First prick the rubber pipe with the cap tip, put the tip on, squeeze the glue into the cleaned surface, distribute it evenly, and fasten the adhesive surface together.
The coated parts are placed in air and solidified at room temperature for 24 hours.
1. After the operation is completed, the silicone sealant should tighten the cap immediately and seal and save.
2. When reusing, if there is a little skin seal, remove it. this will not affect the normal use.
Packing specification: 100ml/pcs, 310ml/pcs or as required by customer.
Storage: stored in a cool and dry place for 12 months.
Note:
The above data are based on our extensive experiments and the results are reliable. However, due to the diversity of practical applications, the application conditions are not within our control, so users need to conduct tests before using to confirm whether this product is applicable or not. We do not warrant any problems arising from the use of our products under specified conditions and are not liable for any direct, indirect or accidental loss. If any problems in usage, you can contact our technical services department, we will do what we can to help you.
Copyright © 2019 Huizhou Sandao New material Co., Ltd. | All Rights Reserved
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.
