SANDAO  > 

AI - Page Sitemap

 > 

SANDAO potting Two-component addition-type potting adhesive TDS  manufacturer for glass parts

SANDAO potting Two-component addition-type potting adhesive TDS  manufacturer for glass parts

SANDAO potting Two-component addition-type potting adhesive TDS  manufacturer for glass parts

Model number
SD6341
MOQ
1pcs
Color
White/black liquid
Package
1.25kg/ set
Main characteristic
Two-component Ratio is 4:1, no need of vacuum defoaming
Main application
silicon steel materials, roller core materials, coil windings,etc.
Lead time
within a week after payment
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Information of SANDAO potting Two-component addition-type potting adhesive TDS  manufacturer for glass parts
Application Scope
SANDAO New Material's ms adhesive is widely used in various scenes.SANDAO New Material has been engaged in the production of silicone rubber for many years and has accumulated rich industry experience. We have the ability to provide comprehensive and quality solutions according to actual situations and needs of different customers.
Company Advantages
1. The SANDAO Two-component addition-type potting adhesive TDS provides reliable performance, and users won't have to worry about its quality.
2. Our professional quality team adopts scientific methods and takes strict quality assurance measures.
3. The product stands out in the field for its considerable economic benefits.
4. This product has an increased frequency of utilization.

our product

bg


SANDAO potting Two-component addition-type potting adhesive TDS  manufacturer for glass parts-1
Epoxy resin potting sealant SD6341
Epoxy resin potting sealant SD6341 is a two-component electronic material used for general electronic component sealing and circuit board sealing. It can be cured at room temperature or heated, and the cost is lower. Temperature during curing is low and the highest exothermic temperature is less than 50 ℃. Good surface gloss, low shrinkage, excellent moisture resistance and insulation after curing.

Application

bg


Epoxy resin pouring sealant is widely used in silicon steel materials, roller core materials, coil windings, capacitor bushing and other important radiating and high temperature resistance electronic appliances, such as transformers, motors, radiators, sensors, electromagnets, PCB plates, solenoid valves, air conditioners, power module, electromagnetic clutch, automobile parts, etc.

SANDAO potting Two-component addition-type potting adhesive TDS  manufacturer for glass parts-2

air conditioning

SANDAO potting Two-component addition-type potting adhesive TDS  manufacturer for glass parts-3

heat sink

SANDAO potting Two-component addition-type potting adhesive TDS  manufacturer for glass parts-4

Induction cooker bonding


SANDAO potting Two-component addition-type potting adhesive TDS  manufacturer for glass parts-5

PCB board bonding

SANDAO potting Two-component addition-type potting adhesive TDS  manufacturer for glass parts-6

Power module

SANDAO potting Two-component addition-type potting adhesive TDS  manufacturer for glass parts-7

Motor bonding



product Performance

bg


Characteristics
  • ◪  Two-component 4:1 ratio, 100% solidification, no solvent, no pollution, no toxicity.

  • ◪  Good weather resistance, water resistance, oil resistance, acid resistance, high temperature resistance, insulation, flame retardant, cracking resistance and so on.

  • ◪  Can be cured at room temperature and heating, high bonding strength. Stable performance, good toughness and filling after curing, excellent physical, mechanical and insulation properties.

  •   It has low viscosity after mixing, no need of vacuum defoaming at room temperature, and long operating time, so it’s a kind of ideal pouring glue.

  •   For some larger parts of the pouring and sealing, can be one-time molding, more operational advantages.

  •   Achieve actually measured high thermal conductivity: 0.8w/m.k

General performance
ItemConditionPart APart BMix liquid
AppearanceVisualWhite/black Viscous liquidTransparent / brown liquidWhite/black liquid
Density25℃,g/cm31.64~1.651.11~1.131.59~1.61
Viscosity25℃, mpa.s12000~1300040~120800~1000

Usage: 1.Mixing: mix part A and part B at 4:1 ratio by weight, potting after stir well. The operating time after mixing is 60 minutes at 25 ℃.
2.Solidification: at 25 ℃, it will harden at 6 for 8 hours, and at 80 ℃ for 1 hour. It can be assembled after hardening. Tests typically take place after 24 hours of curing.

Notes:This data is measured by the technicians in the laboratory, which has certain reference value for the users. However, because the usage methods and conditions of each user are different, it is suggested that the users should find out the best technology and method according to their own conditions.


Feature after curing
Itemcondition/unitTest result
HardnessShore-D>80
Volume resistivity25℃,Ω.cm2.8*1015
Breakdown voltage25℃,kv/mm>30
Dielectric constant25℃,1MHZ3.1±0.1
Dielectric loss tangent25℃,1MHZ<0.01
Shear temperature rangeMpa>10
Operating temperature range-40~150
Curing shrinkage%<0.5

Attention: 1, This kind of products are not dangerous goods, according to the general chemical storage and transportation, the storage period is 1 year.
2, A component should be stirred properly before use (as there will be precipitation after long period of time, it does not affect the performance after stir well,); after accurate weighing of component A and component B, please stir well and then use it.
3, The mixing amount of glue should not be too large, otherwise, the operating time will be shortened which lead to waste if cannot use out timely.

Notes:The above performance data are typical data of the product at humidity 70 ℃, temperature 25 ℃,for customer's reference only. Customers are kindly requested to use the measured data.

Product details

bg
SANDAO potting Two-component addition-type potting adhesive TDS  manufacturer for glass parts-8
Epoxy resin potting and sealing adhesive
SD6341 epoxy potting compound is a two-component electronic material used for Potting of general electronic components And circuit board sealing.
SANDAO potting Two-component addition-type potting adhesive TDS  manufacturer for glass parts-9
White/black viscous liquid
It can be cured at room temperature, and can be Cured by heating. After curing, the surface gloss Is good, the shrinkage rate is low, and the Moisture resistance and insulation Performance are excellent.
SANDAO potting Two-component addition-type potting adhesive TDS  manufacturer for glass parts-10
Green environmental protection
Non-toxic, non-corrosive, free of harmful Substances.
SANDAO potting Two-component addition-type potting adhesive TDS  manufacturer for glass parts-11
Plastic bottle packaging
packaging specifications: 1.25kg/ set.

Company Features
1. Shaped by many years of experience, Huizhou SANDAO New Material Co., Ltd is recognized as an innovative and professional enterprise specializing in manufacturing ge rtv silicone.
2. Since the establishment of SANDAO, advanced machines as well as progressive technical methods have been introduced to ensuring the quality of Two-component addition-type potting adhesive TDS.
3. Our company has a clear vision: to be a strong leader in this industry in the coming years. We will enlarge our investment in R&D, hoping to provide unique and practical products for customers. We believe that climate change may have long-term direct and indirect implications for our business and supply chain. Thus, we aim to keep the impact of the raw materials we use to a minimum. Recognizing the importance of socially responsible work to our customers and employees, we focus on a wide range of things, such as environmental protection, philanthropy, ethical labor practices, etc. We are committed to offering top-of-grade customer services. We will treat each customer with respect and take appropriate actions based on the actual situations, and we will keep track of customer feedback at all time.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...