SANDAO resin glue is designed after testing on the potential customers and the market research groups. 2.
epoxy resin has the advantages of low-price and simple-structure, so are particularly suit for resin glue. 3.
The advantages of epoxy resin are its being simple in structure, low in cost and resin glue. 4.
The application field of this product is wide. Our customers use it in apparel, furnishing decorative, automobile, medical, astronautics and military industries.
Sandao High temperature resistant epoxy resin AB adhesive SD829
Sandao High temperature resistant epoxy resin AB adhesive SD829 is a two component high temperature resistant adhesive based on epoxy resin. It has high shear peeling strength, good toughness, waterproofing, corrosion resistance ,weak acid and alkali resistance, impact resistance, low smell, resistance to most chemical media, Extreme temperature and excellent electrical insulation. Self-leveling, suitable for filling, bonding and sealing.
Sandao high temperature resistant epoxy resin AB adhesive SD829 is used for bonding metals, plastics, rubber, glass, electroplating / baking paint / magnetic materials, such as for aircraft, motor, etc.
Electroplating paint bonding
|Epoxy resin AB glue||SD829 part A||SD829 Part B|
|Viscosity (mPa.s 25℃)||26000-28000||26000-28000|
|Specific gravity (g/ml 25℃)||1.6-1.9||1.6-1.9|
|Ratio（weight ratio pbw）||1||1|
|Gel time under normal temperature（25℃）20g||1h|
|Curing condition|| 80℃||30 mins|
|Active hydrogen equivalentg/eq||/||185/195|
|Distortion temperature HDT||80℃|
|Distortion temperature HDT||5.0~1015 |
|Shear strength of different materials（Mpa）|
|Aluminum / copper||17-20|
High temperature epoxy resin AB glue
SD829 high temperature resistant epoxy resin AB glue is an epoxy resin based two component high temperature adhesive.
It's high shear strength, good toughness, waterproof, non-corrosive and other weak acid and alkali resistance, extreme temperature and excellent electrical insulativity properties.
Odorless, non-pollution, anti-shock, resistant to most chemical media.
AB mixing tube
packaging specifications: 64g /tube.
1. AB glue is slightly irritating, please wear gas mask and anticorrosion gloves when operating.
2. Cover at any time after each extraction, lest moisture absorption affect curing and performance.
3. Mass use of this product needs to be in a well-ventilated place.
Packaging and preservation
AB glue is packed with AB mixed pipe, 64g/ pcs, transported as non-dangerous goods. It should be stored in a dry, shady place (below 5 ℃ ~ 26 ℃), the shelf life is within 12 months from the date of manufacture.Company Features1.
Huizhou SANDAO New Material Co., Ltd deals with epoxy resin and exports to many countries. 2.
SANDAO has high requirements on quality before delivering to customers. 3.
We are making efforts to reduce our negative environmental impact during production. We have brought in energy-efficient manufacturing facilities, hoping to cut carbon footprint and reduce pollution. Excellence, integrity and entrepreneurship is our common belief in professional and personal behavior and the fundamental strength of our business. Call now!
1.Can cure at room temperature or heating curing,
2.Can automatic antifoaming
3.Can automatic leveling
4.Cured without ripples, no bubbles
5.Good transparency and excellent surface gloss
6.Can polish after drying
7.After dry,it is with high hardness as stones
8.With high gloss like mirror
Step 1: Measure Epoxy
JNX 319AB Clear Epoxy is two-part, epoxy coating and mixed by 3 to 1. Using electronal scale weight 2A and 1B. Mixingit well. Then pouring the mixture into a new container. Inorder to makesure it is 100% mixing well.
Step 2: Paint on a Seal Coat of Epoxy
On porous material such as wood, you will need to paint on a seal coat of the same epoxy first to seal any pores in the surface. This prevents air bubbles from forming in the following flood coat. Not all surfaces require a seal coat. Contact customer service if you are unsure if your project will need a seal coat as you will need to figure the seal coat into your epoxy order to make sure you have enough product.
Step 3: Pour Epoxy Flood Coat
Pour the epoxy onto the surface working your way down the length of the area. The epoxy self levels so there is no need to move it around with any tools. The epoxy coat can be allowed to flow over the sides which will create a coating on the vertical edges. The epoxy that drips over will form bumps about 1/2 inch underneath the lip of the edge. These drips can be sanded off once the epoxy has cured.
*Multiple flood coats can be applied to cover over embedded objects. Just pour a new flood coat every 4 hours.
Step 4: Pop Air Bubbles with a Plumber's Torch or Heat Gun
Once you finish pouring the epoxy, you will need to pop air bubbles using a plumber's torch or a heat gun (not a hair dryer). This process is the easiest step as it only takes about 30 seconds to 1 minute to do. Keep the torch or heat gun a few inches from the surface and simply wave it back and forth until you cover the entire distance of the surface. The heat pops any bubbles instantly.
The epoxy is dry to the touch in 12 hours. Allow 72 hours before using the surface. That's it!