module One-component RTV silicone rubber TDS factory for substrate

our product

SANDAO One-component RTV silicone rubber TDS factory for substrate-1

Silicone adhesive sealant SD906

Silicone adhesive sealant SD906 is a one-component RTV silicone rubber with high strength, good thixotropic properties, neutral non-corrosion, high temperature resistance, high pressure resistance, solvent resistance, low shrinkage and no collapse. Suitable for large gap (0~6mm) adhesive seal, waterproof, oil proof, impact resistant.

Application

The RTV silicone adhesive sealant SD906 is suitable for bonding and sealing of refrigerators, microwave ovens, circuit boards, electronic components and machinery. This silicone rubber SD906 can be applied to metals, glass, ceramics, plastics, etc.

SANDAO One-component RTV silicone rubber TDS factory for substrate-2

Microwave oven adhesive seal

SANDAO One-component RTV silicone rubber TDS factory for substrate-3

Refrigerator bonding seal

SANDAO One-component RTV silicone rubber TDS factory for substrate-4

Semiconductor material bonding

SANDAO One-component RTV silicone rubber TDS factory for substrate-5

Ceramic bonding

SANDAO One-component RTV silicone rubber TDS factory for substrate-6

Glass bonding

SANDAO One-component RTV silicone rubber TDS factory for substrate-7

Metal bonding

product Performance

Type	SD906T	SD906W	SD906B
Color	Colorless transparent	white	black
Viscosity（cp）	paste	paste	paste
Density（g/cm3）	1.03	1.33	1.33
Tack-free time（25℃，min）	≤20	≤20	≤20
Tensile strength (MPa)	2.0	2.0	2.0
Elongation（%）	300～400	300～400	300～400
Shear strength（MPa）	1.5	1.5	1.5
Hardness(shore A)	25～35	30～45	30～45
Temperature range（℃）	-60～280	-60～280	-60～280
Dielectric strength（kV/mm）	18	18	18
Dielectric constant（@60Hz）	2.8	2.8	2.8
Volume Resistance（Ω.cm）	2×10¹⁶	2×10¹⁶	2×10¹⁶

Product details

One-component RTV silicone rubber

SD906 (silicone adhesive sealant) is a one-component RTV silicone rubber

Eco-environmental protection

Neutral non-corrosion, odorless, non-pollution, good viscosity and fluidity.

SANDAO One-component RTV silicone rubber TDS factory for substrate-10

Milky white paste

After curing, it has high temperature resistance, high pressure, solvent resistance, low shrinkage and no collapse.

SANDAO One-component RTV silicone rubber TDS factory for substrate-11

Packing specifictions

100g/tube 310ml/cartridge 2.6L/bottle

Use instructions

The surface of the substrate must be cleaned, and well-distributed can improve the bonding effect(thickness not exceeding 6 mm).
The silicone adhesive sealant surface curing time of about 20 minutes and fully cured after 24 hours.

Packaging and preservation

Packing specification: 100g/pcs ,300ml/pcs, 2600ml/pcs.

Storage: stored in a cool and dry place for one year.

Notes:
1.Wet air is needed for curing and solidify. It may take more time for curing if bonding surface is large.
2.Please tighten the capping tube after use to prevent colloid solidification in the tube. If there is solidification at the end of the pipe, remove the solidified material and use it as usual.
3.Keep thermal paste out of reach of children.
4.Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.

Company Features
1. With time changing, Huizhou SANDAO New Material Co., Ltd has been grown into a mature supplier that specializes in producing One-component RTV silicone rubber TDS.
2. Made by the most advanced machine, the quality of rtv silicone rubber can be guaranteed.
3. Huizhou SANDAO New Material Co., Ltd constantly walks on the path to excellence in One-component RTV silicone rubber TDS. Inquiry! Huizhou SANDAO New Material Co., Ltd puts forward solutions that enhance the client's business in new ways. Inquiry!

h******n

SANDAO One-component RTV silicone rubber TDS is scientifically designed. Correct mechanical, hydraulic, thermodynamic and other principles are applied while designing its elements and the whole machine.

k******f

SANDAO One-component RTV silicone rubber TDS has passed the following pre-production processes. They are the development of fabric sample, pattern making, correction of pattern, pattern grading, approval of fabric, and testing of fabrics and other raw materials.

u******a

SANDAO rtv silicone rubber will be inspected to guarantee high quality. It will be scrutinized to eliminate the circumstances of skipping stitches, sparse needle pitch, loose thread, floating thread, and break stitches.

k******d

SANDAO One-component RTV silicone rubber TDS involves a wide variety of manufacturing processes. They cover foot type collection, CAD pattern design, 3D printing, machining (cutting, heating, pressing, etc.), trimming, and trial clinical application.

z******i

Materials research is essential for the successful SANDAO rtv silicone design. Its materials will be investigated in terms of breathability, thermal rating, water rating, slip and impact resistance.

e******g

This product has electromagnetic compatibility. EMC testings are performed in it manufacturing to a wide range of EMC standards such as EMC Directive 2014/30/EU.

Product Message

*Name

Phone

*E-mail

*Content

SANDAO One-component RTV silicone rubber TDS factory for substrate