The design of rtv silicone rubber is frequently renovate with modern technology. 2.
The product features safety in use. Controlled by microcomputer, it has the self-locking function in each main process. 3.
The product is not prone to deformation. Made from elastomeric materials, it is specially formulated to endure the application stresses to which it is subjected. 4.
The use of this product can result in significant GHG emission reduction, which further slows down the climate change. 5.
The product is specially designed for people's life or work, which will certainly help them save more time, money, and energy.
Printed circuit board coating SD399
Printed circuit board coating SD399 is a fluid, one-component, fast-curing, non-corrosive silicone rubber adhesive sealant that cures into a silicone elastomer in air. This product complies with: MIL-A-461468 Corrosive Test Standard. Excellent electrical insulation performance against ozone and chemical attack.
The silicone adhesive is suitable for waterproofing of electronic coatings, LCD modules for potting, solar energy, automobiles, home appliances, electrical appliances, circuit boards, etc.
Electronic product bonding
|Color||Colorless transparent semi-fluid||Black semi-fluid||White semi-fluid|
SD399 circuit board coated with silicone
SD399 circuit board coating is a fluid, one-component, fast curing, non-corrosive silicone rubber adhesive sealant.
Green environmental protection
Rapid vulcanization, very low odor, release of alcohol vapor during vulcanization
Colorless transparent rogue
Excellent heat resistance and cold resistance, -50 to 200 ° C, excellent weather resistance, ozone resistance and chemical resistance, excellent electrical insulation properties
Long storage period
Store in a cool, dry place with a shelf life of six months. Packing specification: 330ML / PCS or according to customer requirements.
First, surface of the substrate is cleaned to remove rust, dust and oil.
Second the silicone adhesive sealant has a surface cure time of about 20 minutes and is fully cured after 24 hours.
1. Keep thermal paste out of reach of children.
2. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
Since its inception, Huizhou SANDAO New Material Co., Ltd has been committed to R&D and manufacturing of rtv silicone rubber . 2.
The standard nature of these processes permits us to fabricate rtv silicone . 3.
SANDAO has been holding the principle of serving customers in the high-end standard. Inquire now! Huizhou SANDAO New Material Co., Ltd strives to be the most professional One-component RTV silicone rubber TDS supplier offering the best service. Inquire now!