newly MS adhesive series antifungal vendor for electrical products

Latest products

SD401ACyanoacrylateadhesive(superglue)

SD103Cyanoacrylateadhesive(superglue)

SD958 MS building all-purpose glue

SD858 Antibacterial and Antifungal Adhesive

Product Information
Feedback

Product Details

We are confident about the exquisite details of ms adhesive.Good materials, advanced production technology, and fine manufacturing techniques are used in the production of ms adhesive. It is of fine workmanship and good quality and is well sold in the domestic market.

Company Advantages
1. The outline of MS adhesive series is original and special.
2. The product features high energy density. The lighter elements or compounds for the electrodes have been chosen and greatest reversible capacity of materials have been used.
3. After participating in physical sports, people can benefit from it to promote muscle relaxation by helping reduce muscle tension and eliminate lactic acid.
4. The product helps releases stress and tension. It helps open the skin pores and helps the body in removing harmful toxins and other impurities.

our product

SANDAO newly MS adhesive series vendor for electrical products-1

MS-SD818 General purpose sealant

SD818 all-purpose nail-free adhesive is a new type of modified silane sealant with low modulus and high elasticity, which is mainly aimed at solve the problems of joint shrinkage deformation, poor weathering resistance of sealant and poor adhesion between sealant and substrate. The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance, no substrate pollution, non-toxic low VOC, non-corrosive mirror, and have excellent adhesive properties with concrete, stone, ceramics and glass and other substrates and so on.

Application

Multifunctional adhesives can be used for bonding, sealing and repairing cracks.

High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.

SANDAO newly MS adhesive series vendor for electrical products-2

Cabinet corner bonding

SANDAO newly MS adhesive series vendor for electrical products-3

Electrical bonding

SANDAO newly MS adhesive series vendor for electrical products-4

Electronic Components

SANDAO newly MS adhesive series vendor for electrical products-5

kitchen

SANDAO newly MS adhesive series vendor for electrical products-6

Window bonding

SANDAO newly MS adhesive series vendor for electrical products-7

window gap bonding

product Performance

Type	SD818
Color	yellow
Viscosity (pa.s) 10rpm	900
Initial curing time（mins）	30
100% modulus (Mpa)	1.2
Elongation at break（N/mm）	230
Tensile strength（MPa）	1.5

Product details

SANDAO newly MS adhesive series vendor for electrical products-8

MS-SD818 General purpose sealant

SANDAO newly MS adhesive series vendor for electrical products-9

Light yellow

The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance.

SANDAO newly MS adhesive series vendor for electrical products-10

Environmental protection

No solvent, environmental protection, odorlessness, instant positioning.

SANDAO newly MS adhesive series vendor for electrical products-11

Storage

Store in a cool and dry place under normal temperature, storage period is 12 months.

Use instructions

The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .

Notes：

1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.

Company Features
1. The SANDAO brand is a leader in the design, manufacturing, sales and service of the industry.
2. MS adhesive series covers a series of MS adhesive series with high-grade quality & stable technology.
3. Huizhou SANDAO New Material Co., Ltd plans strategically for the future. Ask! High quality customer service of SANDAO is highly commented by customers. Ask!

e******f

Our independent design for MS adhesive series can greatly help to improve our brand awareness.

x******c

Compared with normal material, the remarkable advantages of material for MS adhesive series prove that MS adhesive series is the best.

w******f

All MS adhesive series may be the same, but MS adhesive series make us take the lead.

x******y

MS adhesive series promotes the sales of MS adhesive series.

e******a

The design of ms polymer adhesive is very innovative.

g******m

An application to a ms polymer adhesive shows that ms polymer adhesive is ms polymer adhesive.

Product Message

*Name

Phone

*E-mail

*Content

SANDAO newly MS adhesive series vendor for electrical products