newly MS adhesive series antifungal long-term-use for fixing products

Latest products

SD401ACyanoacrylateadhesive(superglue)

SD103Cyanoacrylateadhesive(superglue)

SD958 MS building all-purpose glue

SD858 Antibacterial and Antifungal Adhesive

Product Information
Feedback

Company Advantages
1. SANDAO ms polymer adhesive has passed through a series of tests. These tests include the salt spray, surface wear, electroplating, polish as well as surface spraying. Without any halogen, it is healthy and environmentally friendly
2. Huizhou SANDAO New Material Co., Ltd will continuously make efforts to improve customer experience. Its curing exothermic peak is low and the curing shrinkage is small
3. This product has the required softness. Its fabrics adopt chemical softener to remove the roughness and the force between fibers has been enhanced to reduce the friction.
4. The product is reliable in operation. It can constantly perform its tasks while holding the highest level without any failure. It is corona-resistant and has good resistance to electric leakage
5. The product offers a cushion effect. The softness and elasticity of the materials will significantly absorb the shock on the feet. Its viscosity differs depending on the material, performance and production process

our product

SANDAO newly MS adhesive series long-term-use for fixing products-1

Building adhesives-SD958 super type

MS adhesive, also known as "modified silane polyether adhesive", is based on MS Polymer polymer, the raw material system contains no solvent, zero formaldehyde, zero toluene, no isocyanate and other toxic raw materials. The release of VOC (volatile organic compounds) is almost zero, so it is known as "the greenest new generation sealant".

SD958 super adhesive is a kind of all-purpose adhesive, which is widely used in the field of architectural decoration because of its high bond strength, high initial adhesion and fast grab.

Application

Multifunctional adhesives can be used for bonding, sealing and repairing cracks.

High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.

SANDAO newly MS adhesive series long-term-use for fixing products-2

Corner bonding

SANDAO newly MS adhesive series long-term-use for fixing products-3

Electronic Components

SANDAO newly MS adhesive series long-term-use for fixing products-4

Marble bonding

SANDAO newly MS adhesive series long-term-use for fixing products-5

Metal bonding

SANDAO newly MS adhesive series long-term-use for fixing products-6

Tile bonding

SANDAO newly MS adhesive series long-term-use for fixing products-7

window gap bonding

product Performance

Type	SD958
Color	yellow
Viscosity (pa.s) 10rpm	900
Initial curing time（mins）	30
100% modulus (Mpa)	1.2
Elongation at break（N/mm）	230
Tensile strength（MPa）	1.5

Product details

SANDAO newly MS adhesive series long-term-use for fixing products-8

Building adhesives-SD958 super type

SD958 super adhesive is a kind of all-purpose adhesive.

SANDAO newly MS adhesive series long-term-use for fixing products-9

Light yellow

Which is widely used in the field of architectural decoration because of its high bond strength, high initial adhesion and fast grab.

SANDAO newly MS adhesive series long-term-use for fixing products-10

Environmental protection

No solvent, environmental protection, odorlessness, instant positioning.

SANDAO newly MS adhesive series long-term-use for fixing products-11

Storage

Store in a cool and dry place under normal temperature, storage period is 12 months.

Use instructions

The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .

Notes：

1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.

Company Features
1. Huizhou SANDAO New Material Co., Ltd is one of the principal manufacturers of ms polymer adhesive. We stand out for our expertise in design and production.
2. Huizhou SANDAO New Material Co., Ltd is strong and professional in terms of technology.
3. Winning the favor of customers need the effort of SANDAO each staff. Call now!

b******b

The material of ms polymer adhesive is safe even for children. The product provides a reliable barrier against moisture and oxygen

a******m

Huizhou SANDAO New Material Co., Ltd's design for ms polymer adhesive has always been following the concept - striving for first-rate. The product has the advantage of great sealing property

l******n

The design of ms polymer adhesive is something nice to have. The product contains no toxic substances, doing no harm to the body

g******h

MS adhesive series is the latest hot products in MS adhesive series market. The product has the advantage of tear resistance

b******q

MS adhesive series material assures superior performance of ms polymer adhesive. The product features high transparency and clearness

p******h

The product has withstood the strict performance testings. The product has a wide range of usage for the furniture industry

Product Message

*Name

Phone

*E-mail

*Content

SANDAO newly MS adhesive series long-term-use for fixing products