SANDAO  > 

AI - Page Sitemap

 > 

SANDAO new-arrival Two-component addition-type potting adhesive TDS widely-use for metalparts

SANDAO new-arrival Two-component addition-type potting adhesive TDS widely-use for metalparts

SANDAO new-arrival Two-component addition-type potting adhesive TDS widely-use for metalparts

Model number
SD6341
MOQ
1pcs
Color
White/black liquid
Package
1.25kg/ set
Main characteristic
Two-component Ratio is 4:1, no need of vacuum defoaming
Main application
silicon steel materials, roller core materials, coil windings,etc.
Lead time
within a week after payment
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Information of SANDAO new-arrival Two-component addition-type potting adhesive TDS widely-use for metalparts
Product Details
With the pursuit of perfection, SANDAO New Material exerts ourselves for well-organized production and high-quality ms adhesive. ms adhesive has the following advantages: well-chosen materials, reasonable design, stable performance, excellent quality, and affordable price. Such a product is up to the market demand.
Enterprise Strength
  • SANDAO New Material provides professional comprehensive services based on customer demand.
Company Advantages
1. SANDAO ge rtv silicone is monitored throughout the production process.
2. This product has strong colorfastness. It undergoes the thermal treatment and post curing for a long-lasting finish and colors.
3. Being strong in advanced technology and quality check, SANDAO is specialized in producing high-end Two-component addition-type potting adhesive TDS.
4. Right installation pack is guaranteed in SANDAO to ensure the safety of Two-component addition-type potting adhesive TDS.

our product

bg


SANDAO new-arrival Two-component addition-type potting adhesive TDS widely-use for metalparts-1
Epoxy resin potting sealant SD6341
Epoxy resin potting sealant SD6341 is a two-component electronic material used for general electronic component sealing and circuit board sealing. It can be cured at room temperature or heated, and the cost is lower. Temperature during curing is low and the highest exothermic temperature is less than 50 ℃. Good surface gloss, low shrinkage, excellent moisture resistance and insulation after curing.

Application

bg


Epoxy resin pouring sealant is widely used in silicon steel materials, roller core materials, coil windings, capacitor bushing and other important radiating and high temperature resistance electronic appliances, such as transformers, motors, radiators, sensors, electromagnets, PCB plates, solenoid valves, air conditioners, power module, electromagnetic clutch, automobile parts, etc.

SANDAO new-arrival Two-component addition-type potting adhesive TDS widely-use for metalparts-2

air conditioning

SANDAO new-arrival Two-component addition-type potting adhesive TDS widely-use for metalparts-3

heat sink

SANDAO new-arrival Two-component addition-type potting adhesive TDS widely-use for metalparts-4

Induction cooker bonding


SANDAO new-arrival Two-component addition-type potting adhesive TDS widely-use for metalparts-5

PCB board bonding

SANDAO new-arrival Two-component addition-type potting adhesive TDS widely-use for metalparts-6

Power module

SANDAO new-arrival Two-component addition-type potting adhesive TDS widely-use for metalparts-7

Motor bonding



product Performance

bg


Characteristics
  • ◪  Two-component 4:1 ratio, 100% solidification, no solvent, no pollution, no toxicity.

  • ◪  Good weather resistance, water resistance, oil resistance, acid resistance, high temperature resistance, insulation, flame retardant, cracking resistance and so on.

  • ◪  Can be cured at room temperature and heating, high bonding strength. Stable performance, good toughness and filling after curing, excellent physical, mechanical and insulation properties.

  •   It has low viscosity after mixing, no need of vacuum defoaming at room temperature, and long operating time, so it’s a kind of ideal pouring glue.

  •   For some larger parts of the pouring and sealing, can be one-time molding, more operational advantages.

  •   Achieve actually measured high thermal conductivity: 0.8w/m.k

General performance
ItemConditionPart APart BMix liquid
AppearanceVisualWhite/black Viscous liquidTransparent / brown liquidWhite/black liquid
Density25℃,g/cm31.64~1.651.11~1.131.59~1.61
Viscosity25℃, mpa.s12000~1300040~120800~1000

Usage: 1.Mixing: mix part A and part B at 4:1 ratio by weight, potting after stir well. The operating time after mixing is 60 minutes at 25 ℃.
2.Solidification: at 25 ℃, it will harden at 6 for 8 hours, and at 80 ℃ for 1 hour. It can be assembled after hardening. Tests typically take place after 24 hours of curing.

Notes:This data is measured by the technicians in the laboratory, which has certain reference value for the users. However, because the usage methods and conditions of each user are different, it is suggested that the users should find out the best technology and method according to their own conditions.


Feature after curing
Itemcondition/unitTest result
HardnessShore-D>80
Volume resistivity25℃,Ω.cm2.8*1015
Breakdown voltage25℃,kv/mm>30
Dielectric constant25℃,1MHZ3.1±0.1
Dielectric loss tangent25℃,1MHZ<0.01
Shear temperature rangeMpa>10
Operating temperature range-40~150
Curing shrinkage%<0.5

Attention: 1, This kind of products are not dangerous goods, according to the general chemical storage and transportation, the storage period is 1 year.
2, A component should be stirred properly before use (as there will be precipitation after long period of time, it does not affect the performance after stir well,); after accurate weighing of component A and component B, please stir well and then use it.
3, The mixing amount of glue should not be too large, otherwise, the operating time will be shortened which lead to waste if cannot use out timely.

Notes:The above performance data are typical data of the product at humidity 70 ℃, temperature 25 ℃,for customer's reference only. Customers are kindly requested to use the measured data.

Product details

bg
SANDAO new-arrival Two-component addition-type potting adhesive TDS widely-use for metalparts-8
Epoxy resin potting and sealing adhesive
SD6341 epoxy potting compound is a two-component electronic material used for Potting of general electronic components And circuit board sealing.
SANDAO new-arrival Two-component addition-type potting adhesive TDS widely-use for metalparts-9
White/black viscous liquid
It can be cured at room temperature, and can be Cured by heating. After curing, the surface gloss Is good, the shrinkage rate is low, and the Moisture resistance and insulation Performance are excellent.
SANDAO new-arrival Two-component addition-type potting adhesive TDS widely-use for metalparts-10
Green environmental protection
Non-toxic, non-corrosive, free of harmful Substances.
SANDAO new-arrival Two-component addition-type potting adhesive TDS widely-use for metalparts-11
Plastic bottle packaging
packaging specifications: 1.25kg/ set.

Company Features
1. Integrating development, production, and sales of ge rtv silicone, Huizhou SANDAO New Material Co., Ltd has been regarded as a powerful manufacturer in the market.
2. We have quality-minded staff, including designers, developers, consultants, customer service workers, programmers, and producers. They are well-trained and have the ability and experience to provide solutions and services.
3. Our mission is to satisfy our customers. Nothing is too big or too small for us. From conception to timely and safe delivery, our professional team will provide a one-stop peace of mind service. Call now! We take immense pride in providing the best service. We work hard to ensure that you are well taken care of when you choose us. Your satisfaction is our main priority and we strive to prove that every day. Call now! We will pro-actively corporate with our suppliers complying with ethical practices and help our customers find sustainable solutions to critical issues.
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...