new-arrival MS adhesive seriessealant manufacturer for electrical products

our product

SANDAO new-arrival MS adhesive series manufacturer for electrical products-1

MS-SD818 General purpose sealant

SD818 all-purpose nail-free adhesive is a new type of modified silane sealant with low modulus and high elasticity, which is mainly aimed at solve the problems of joint shrinkage deformation, poor weathering resistance of sealant and poor adhesion between sealant and substrate. The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance, no substrate pollution, non-toxic low VOC, non-corrosive mirror, and have excellent adhesive properties with concrete, stone, ceramics and glass and other substrates and so on.

Application

Multifunctional adhesives can be used for bonding, sealing and repairing cracks.

High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.

SANDAO new-arrival MS adhesive series manufacturer for electrical products-2

Cabinet corner bonding

SANDAO new-arrival MS adhesive series manufacturer for electrical products-3

Electrical bonding

SANDAO new-arrival MS adhesive series manufacturer for electrical products-4

Electronic Components

SANDAO new-arrival MS adhesive series manufacturer for electrical products-5

kitchen

SANDAO new-arrival MS adhesive series manufacturer for electrical products-6

Window bonding

SANDAO new-arrival MS adhesive series manufacturer for electrical products-7

window gap bonding

product Performance

Type	SD818
Color	yellow
Viscosity (pa.s) 10rpm	900
Initial curing time（mins）	30
100% modulus (Mpa)	1.2
Elongation at break（N/mm）	230
Tensile strength（MPa）	1.5

Product details

SANDAO new-arrival MS adhesive series manufacturer for electrical products-8

MS-SD818 General purpose sealant

SANDAO new-arrival MS adhesive series manufacturer for electrical products-9

Light yellow

The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance.

SANDAO new-arrival MS adhesive series manufacturer for electrical products-10

Environmental protection

No solvent, environmental protection, odorlessness, instant positioning.

SANDAO new-arrival MS adhesive series manufacturer for electrical products-11

Storage

Store in a cool and dry place under normal temperature, storage period is 12 months.

Use instructions

The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .

Notes：

1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.

Company Features
1. SANDAO has been moving to developing new technology to manufacture MS adhesive series.
2. Huizhou SANDAO New Material Co., Ltd will seize the opportunity to continue the rapid and healthy development of itself in MS adhesive series industry. Call now!

q******s

SANDAO MS adhesive series is professionally designed. It is created by our CAD designers who have the technology and expertise to create jewelry ideas rendered in three dimensions.

p******w

Visual inspection for SANDAO ms polymer adhesive is of importance. It is inspected by workers in terms of blemishes, dents, bubbles, stains, and other production anomalies.

y******z

The manufacture of SANDAO ms polymer adhesive involves several stages. These include prototype design, cutting and forming metal, soldering, casting, polishing, and final assembling.

z******x

SANDAO ms polymer adhesive has to undergo the following production procedures combining traditional techniques: cutting and forming, wax carving, soldering, welding, crafting, setting, polishing, and assembling.

y******a

SANDAO ms polymer adhesive has passed the workmanship review. It is checked for scratches, dents or excessive solder/glue; missing parts, sharp edges or points, etc.

i******n

Our MS adhesive seriesis durable and beautiful.

Product Message

*Name

Phone

*E-mail

*Content

SANDAO new-arrival MS adhesive series manufacturer for electrical products