SANDAO  >  AI - Page Sitemap  >  SANDAO new-arrival MS adhesive series long-term-use for fixing products
SANDAO new-arrival MS adhesive series long-term-use for fixing products

SANDAO new-arrival MS adhesive series long-term-use for fixing products

Model number
SD818
MOQ
1pcs
Color
yellow
Package
330ml/set
Main characteristic
high-strength elastic bonding, seal repair,water and temperature resistance, instant positioning.
Main application
concrete walls,wood panels,ceramic products,metals,stone and so on.
Lead time
within a week after payment
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
Well-chosen in material, fine in workmanship, excellent in quality and favorable in price, SANDAO New Material's ms adhesive is highly competitive in the domestic and foreign markets.Compared with other products in the same category, ms adhesive has more advantages, specifically in the following aspects.
Enterprise Strength
  • SANDAO New Material firmly believes that high-quality products and services serve as the foundation of customer's trust. A comprehensive service system and a professional customer service team are established based on that. We are dedicated to solving problems for customers and meeting their demands as much as possible.
Company Advantages
1. SANDAO MS adhesive series is delicately manufactured by excellent production team using advanced technology and sophisticated equipment.
2. The product is notable for its excellent colorfastness. Its fabric has reached saturation point, so it does not need to be dyed again.
3. This product acts as a good role in boosting people's moods. It will make them feel confident every time they’re dressing.
4. People can be assured that the product does not likely to accumulate illness-causing bacteria. It is safe and healthy to use with only simple care.

our product

bg


SANDAO new-arrival MS adhesive series long-term-use for fixing products-1

MS-SD818  General purpose sealant 

SD818 all-purpose nail-free adhesive is a new type of modified silane sealant with low modulus and high elasticity, which is mainly aimed at solve the problems of joint shrinkage deformation, poor weathering resistance of sealant and poor adhesion between sealant and substrate. The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance, no substrate pollution, non-toxic low VOC, non-corrosive mirror, and have excellent adhesive properties with concrete, stone, ceramics and glass and other substrates and so on.

Application

bg



Multifunctional adhesives can be used for bonding, sealing and repairing cracks.

High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.  


SANDAO new-arrival MS adhesive series long-term-use for fixing products-2

Cabinet corner bonding

SANDAO new-arrival MS adhesive series long-term-use for fixing products-3

Electrical bonding

SANDAO new-arrival MS adhesive series long-term-use for fixing products-4

Electronic Components


SANDAO new-arrival MS adhesive series long-term-use for fixing products-5

kitchen

SANDAO new-arrival MS adhesive series long-term-use for fixing products-6

Window bonding

SANDAO new-arrival MS adhesive series long-term-use for fixing products-7

window gap bonding



product Performance

bg


TypeSD818
Coloryellow

Viscosity (pa.s) 10rpm

900

Initial curing time(mins)

30

100% modulus (Mpa)1.2
Elongation at break(N/mm)230
Tensile strength(MPa)1.5

Product details

bg
SANDAO new-arrival MS adhesive series long-term-use for fixing products-8
MS-SD818  General purpose sealant
MS-SD818  General purpose sealant
SANDAO new-arrival MS adhesive series long-term-use for fixing products-9
Light yellow

The product has excellent mechanical properties, strong resistance to shift, excellent weather resistance.

SANDAO new-arrival MS adhesive series long-term-use for fixing products-10
Environmental protection
No solvent, environmental protection, odorlessness, instant positioning.
SANDAO new-arrival MS adhesive series long-term-use for fixing products-11
Storage
Store in a cool and dry place under normal temperature, storage period is 12 months.

Use instructions

bg


The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .

Notes:

  • 1. Not suitable for: adhesion of smooth surface substrates.

  • 2. Maximum endurance curing time: 24 hours.

  • 3. Construction environment temperature: 5 ℃ ~ 40 ℃.

  • 4. The operating temperature shall not be lower than-20 ℃  or above 65 ℃.

  • 5. Store in a cool and dry place under normal temperature, storage period is 12 months.



Company Features
1. With outstanding capability in manufacturing ms polymer adhesive, Huizhou SANDAO New Material Co., Ltd is a company spoken highly of by competitors in the market.
2. Huizhou SANDAO New Material Co., Ltd has attentive, dedicated and professional design team.
3. ms polymer adhesive is the value chain management principle that SANDAO has always followed. Get info! Huizhou SANDAO New Material Co., Ltd focuses on providing high quality MS adhesive series that meets the most economical needs while satisfying market demands. Get info! Taking the vision of ms polymer adhesive and adhering to the concept of ms polymer adhesive are two important points in SANDAO. Get info!
SANDAO MS adhesive series is manufactured strictly according to the standards for the testing of furniture. It has been tested for VOC, flame retardant, aging resistance, and chemical flammability. It can be considerably produced by the highly automatic CNC
The design of SANDAO ms polymer adhesive takes into account some critical factors. They include innovative shapes, functional requirements, color coordination, and aesthetic appeal. The product has gone through a sound quality control system
SANDAO MS adhesive series has gone through many kinds of tests. They are fatigue testing, wobbly base testing, smell testing, and static loading testing. The product has gone through a sound quality control system
Stringent quality and safety standards are set for SANDAO ms polymer adhesive. They are physical performance testing, toxic and hazardous substance testing, fire testing, and others. It can be used widely on many occasions such as parties and weddings
The design of SANDAO ms polymer adhesive is based on “people+design” concept. It mainly focuses on people, including the convenience level, practicality, as well as the aesthetic needs of people. With the direct sale, the product is very competitive
The product is equipped with all the safety systems. The function of automatic diagnosis enables it to detect the faults of the instruments by alarming. It can be considerably produced by the highly automatic CNC
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...