SANDAO MS adhesive series will go through a double check before shipping. It is rigorously tested to guarantee its quality in terms of its parameters to make sure it suits the designated phone models. 2.
MS adhesive series have strong resistance to ms polymer adhesive. 3.
By detailed discussion of ms polymer adhesive, MS adhesive series with features likems polymer adhesive is designed. 4.
Huizhou SANDAO New Material Co., Ltd has a complete processing equipment, advanced technology and a sound quality control system. 5.
Huizhou SANDAO New Material Co., Ltd has advanced processing technology, exquisite craftsmanship, and strict quality control system.
Building adhesives-SD958 super type
MS adhesive, also known as "modified silane polyether adhesive", is based on MS Polymer polymer, the raw material system contains no solvent, zero formaldehyde, zero toluene, no isocyanate and other toxic raw materials. The release of VOC (volatile organic compounds) is almost zero, so it is known as "the greenest new generation sealant".
SD958 super adhesive is a kind of all-purpose adhesive, which is widely used in the field of architectural decoration because of its high bond strength, high initial adhesion and fast grab.
Multifunctional adhesives can be used for bonding, sealing and repairing cracks.
High-strength bonding force suitable for different substrates: concrete walls, wood panels, ceramic products, metals, stone and so on. It can be used on wet surface.
Viscosity (pa.s) 10rpm
Initial curing time（mins）
|100% modulus (Mpa)||1.2|
|Elongation at break（N/mm）||230|
Building adhesives-SD958 super type
SD958 super adhesive is a kind of all-purpose adhesive.
Which is widely used in the field of architectural decoration because of its high bond strength, high initial adhesion and fast grab.
No solvent, environmental protection, odorlessness, instant positioning.
Store in a cool and dry place under normal temperature, storage period is 12 months.
The construction surface should be clean and dry. Cover the adjacent surfaces of the glueing with striped rubber paper. Stab aluminum film, cut the tip into 45 degrees, glueing evenly. Use a scraper or latex glove to smooth the glue. Tear off the striped tape before the glue curing. If glue is not used up, natural seal by extruding 1cm rubber wire, and remove the solidified part before next use .
1. Not suitable for: adhesion of smooth surface substrates.
2. Maximum endurance curing time: 24 hours.
3. Construction environment temperature: 5 ℃ ~ 40 ℃.
4. The operating temperature shall not be lower than-20 ℃ or above 65 ℃.
5. Store in a cool and dry place under normal temperature, storage period is 12 months.
Fully complementing the development policy and adjusting the shift changes make SANDAO grow rapidly. 2.
Our product management team is responsible for the life cycle of our products. They constantly focus on the safety and environmental issues at each phase. 3.
Our company bears social responsibilities. To make our manufacturing unit sustainable in the long term, we make efforts to carry out solar and wind energy projects. We not only take part in the charitable giving but also we devote ourselves to volunteering in the communities, so as to make our society better. Check now! Our corporate culture is innovation. In other words, break the rules, refuse mediocrity, and never follow the wave. Check now! The goal of our company is to give back to the community and society. We will never compromise on quality and safety. We only dedicate the best to the world. Check now!