The processing method of SANDAO rtv silicone is flexible. It may be one-piece welding, or it may be screw assembly. Generally, we will increase the fixing frame in order to increase the stability of this product. 2.
One-component RTV silicone rubber TDS excels due to its obvious superiority such as rtv silicone . 3.
With such advantages as rtv silicone , One-component RTV silicone rubber TDS has been widely applied in the fields. 4.
Our One-component RTV silicone rubber TDS is highly recommended by customers for its high reliability.
Thermal conductive silica gel SD916
Thermal conductive silica gel SD916 has both bonding and good thermal (heat dissipation) properties. The thermal conductive silica gel is a reinforced neutral silicone elastic rubber. After curing, the rubber has good resistance to high and low temperature changes. It will not fall off after long-term use, and will not cause contact gaps to reduce heat dissipation.
The most important application is to replace the thermal grease (paste) for the filling and bonding between the CPU and the heat sink, the thyristor intelligent control module and the heat sink, the high-power electrical module and the heat sink.
Microwave oven adhesive seal
Radiator filling and bonding
Refrigerator bonding seal
Semiconductor material bonding
Thyristor filling and bonding
|Tensile strength (MPa)||≥2.5||≥2.5||≥2.5|
|Hardness (shore A)||50～65||50～65||50～65|
|Thermal conductivity（w/(m.k)） ||1.2||0.8||2.0|
Thermal conductivity paste
SD916 thermal silica gel is a one-component Room temperature curing adhesive It has both bonding and good thermal (heat dissipation) properties.
Neutral non-corrosive, odorless, non-pollution,Is a reinforced neutral silicone elastic rubber.
After curing, it has excellent resistance to high and low temperature, will not fall off after long-term use, and will not produce bonding gap to reduce heat dissipation effect.
Metal hose packaging
Packaging specifications: 100g /tube, 310ml/ plastic cartridge,2.6L/ bottle
Cleaning the surface of the adhered or coated object to remove rust, dust and oil.
Unscrew the rubber cap and squeeze the glue onto the cleaned surface to make it evenly distributed.
Place the glued or sealed parts in the air to allow them to cure naturally. The curing process is a curing process from the surface to the inside. The glue will cure to a depth of 2-4 mm within 24 hours (room temperature and 55% relative humidity). If the position is deep, especially in areas where air is not easily accessible, The time to complete cure will be extended, and if the temperature is lower, the cure time will also be extended.
1. Keep thermal paste out of reach of children.
2. Manufacturer shall not be liable to the buyer or any third party for injury, loss or damage directly or indirectly resulting from the use of, or inability to use, the product. Recommendations or statements other than those contained in a written agreement signed by an officer of the manufacturer shall not be binding by the manufacturer. This product has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses which implantation within the human body is intended.
Huizhou SANDAO New Material Co., Ltd is a Chinese company founded years ago dedicated to the design and manufacture of high-quality rtv silicone . 2.
The company has explored many marketing channels in various countries. We have made the products sell like hotcakes in Southeast Asia, Europe, and North America. 3.
Huizhou SANDAO New Material Co., Ltd is committed to becoming a vanguard enterprise in One-component RTV silicone rubber TDS industry with high quality and professional service. Call now! The core value of rtv silicone rubber is kept in each SANDAO's employee mind. Call now! It is Huizhou SANDAO New Material Co., Ltd's goal to seek the excellent quality. Call now! The establishment of a good brand image needs the efforts of each SANDAO employee. Call now!